Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 9 Dec 1996 21:27:46 +0100
From:      roberto@keltia.freenix.fr (Ollivier Robert)
To:        freebsd-current@freebsd.org (FreeBSD Current Users' list)
Subject:   ATAPI on 2.2-ALPHA & general installation remarks
Message-ID:  <Mutt.19961209212746.roberto@keltia.freenix.fr>

next in thread | raw e-mail | index | archive | help
I just received my brand new P6/180 at work. It has an ATAPI CD-ROM (error
made by the vendor, I asked for a SCSI one). It is recognized without
problem by the 2.2-ALPHA boot floppy.

I've installed by FTP though because there is no CD of 2.2-ALPHA. The
install went well after I fought with the 3C509 card (don't ask why I have
both an fxp0 and an ep0). The fxp0 is shipped by HP but has only an 10BT
connector and we use 10B2...

I tumbled on the "no space left on device on /" when restarting the
installation *without* newfs-ing the / partition.

The machine is an HP XU with an on-board Adaptec Ultra controller. Here is
dmesg output without -v. Stephan, if you want a dmesg with -v, just ask.

The motherboard is a dual-PPro although I have only one processor. The PS/2
mouse is recognized without problem by XFree86 3.2.The Millenium is
recognized by XFree86 too and correctly initialized.

Is there some interesting options I could use for the Adaptec ? I intend to
upgrade to 3.0-CURRENT in a few days when the dust of installation is a bit
settled.

It is fast: less than 3mn for a kernel compile (without NFS). The disks
give me 7 MB/s read and 5 MB/s write.

Copyright (c) 1992-1996 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

FreeBSD 2.2-ALPHA #2: Mon Dec  9 16:45:14 MET 1996
    roberto@caerdonn.eurocontrol.fr:/src/src/sys/compile/CAERDONN
Calibrating clock(s) relative to mc146818A clock ... i586 clock: 180060673 Hz, i8254 clock: 1193063 Hz
CPU: Pentium Pro (180.08-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x617  Stepping=7
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory  = 67108864 (65536K bytes)
avail memory = 64163840 (62660K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82378IB PCI-ISA bridge> rev 136 on pci0:0
pci0:1:    CMD, device=0x0646, class=storage (ide) int a irq 14 [no driver assigned]
ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:2
ahc0: Using left over BIOS settings
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
(ahc0:0:0): "SEAGATE ST32550N 8303" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 2033MB (4165272 512 byte sectors)
(ahc0:1:0): "HP 2.13GB B 50-0482 0482" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 2033MB (4165272 512 byte sectors)
vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci0:11
fxp0 <Intel EtherExpress Pro/100B Fast Ethernet> rev 1 int a irq 11 on pci0:12
fxp0: Ethernet address 08:00:09:dc:23:7e
chip1 <Intel 82454GX (Orion) host to PCI bridge> rev 4 on pci0:20
chip2 <Intel 82450KX (Orion) PCI memory controller> rev 4 on pci0:25
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x63 irq 12 on motherboard
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <HITACHI CDR-7930/1023>, removable, accel, dma, iordy
wcd0: 1377Kb/sec, 128Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 5 on isa
ep0: aui/utp/bnc[*BNC*] address 00:60:97:3b:29:b6
npx0 on motherboard
npx0: INT 16 interface

-----End of forwarded message-----

-- 
Ollivier ROBERT    -=- The daemon is FREE! -=-    roberto@keltia.freenix.fr
  FreeBSD keltia.freenix.fr 3.0-CURRENT #31: Tue Dec  3 23:52:58 CET 1996



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Mutt.19961209212746.roberto>