Date: Mon, 15 Mar 2004 16:14:07 +0100 From: Riccardo Veraldi <Riccardo.Veraldi@fi.infn.it> To: freebsd-alpha@freebsd.org Subject: help: X11 problem Message-ID: <4055C83F.1000107@fi.infn.it>
next in thread | raw e-mail | index | archive | help
Hello, I have FreeBSD 4.9 installed on a XP1000 I Was unsuccesfull to try running XFree86 4.3.0 I compiled it from ports. I Tryed with a Elsa Synergy, S3 Trio64 S3, Trio64/DX and S3 VirGE/DX noone of the boards were detected. There are problems scanning the PCI bus. At a certain point the X server gets 100% CPU usage and I must kill it entering with a remote login because the console gets stuck. Nothing is displayed on the console. If I change PCI slot where the video board is installed nothing is displayed on the screen at boot time. I am using a 32 bit PCI Slot for the video board. Here I report the XFree86 log file. anyone could help me with some hints please ? thanks Rick XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 4.9 alpha [ELF] Build Date: 12 March 2004 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 15 09:55:53 2004 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "acer" (**) | |-->Device "S3" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc101" (**) XKB: model: "pc101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:u nscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X1 1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:07:0: chip 1080,c693 card 0000,0000 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 1080,c693 card 0000,0000 rev 00 class 01,01,80 hdr 80 (II) PCI: 00:07:2: chip 1080,c693 card 0000,0000 rev 00 class 01,01,00 hdr 80 (II) PCI: 00:07:3: chip 1080,c693 card 0000,0000 rev 00 class 0c,03,10 hdr 80 (II) PCI: 00:0c:0: chip 5333,8a01 card 10b4,1717 rev 01 class 03,00,00 hdr 00 (II) PCI: 01:03:0: chip 1011,0019 card 0000,0000 rev 41 class 02,00,00 hdr 00 (II) PCI: 01:06:0: chip 1077,1020 card 0000,0000 rev 06 class 01,00,00 hdr 00 (WW) pciGenFindNext: primary bus mismatch on PCI bridge 0x00014000 (0x01, 0x00) (II) PCI: 01:08:0: chip 1011,0024 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 02:09:0: chip 1282,9102 card 3030,5032 rev 31 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (1:8:0), (1,2,2), BCTRL: 0x0003 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x00010000 - 0x00010fff (0x1000) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0x01000000 - 0x010fffff (0x100000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B] (II) Bus 1 prefetchable memory range: (II) Bus 1 prefetchable memory range: [0] -1 0 0x80000000 - 0xffffffff (0x80000000) MX[B]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4055C83F.1000107>