Date: Fri, 21 Jan 2000 20:31:10 -0500 (EST) From: Kenneth Wayne Culver <culverk@wam.umd.edu> To: "Jeremy L. Stock" <jstock@visi.com> Cc: freebsd-current@FreeBSD.ORG Subject: Re: Creative ViBRA16X Problem (fwd) Message-ID: <Pine.GSO.4.21.0001212030320.4451-100000@rac3.wam.umd.edu> In-Reply-To: <Pine.GSO.4.10.10001211714380.16841-100000@isis.visi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same soundcard, and as of right now, the only problem I have with it is that sometimes it will play static instead of the sound I wanted it to play. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Fri, 21 Jan 2000, Jeremy L. Stock wrote: > Thought I'd post this to -current also since it gives a little more detail > (I hope). I can't believe I'm the only one experiencing this since it's > still around when I do a fresh install from a snapshot. Not a huge deal for > me since I can use Windows for audio, but I'd rather use FreeBSD again. I'm > sure this will get addressed before 4.0R. I just wanted to make sure it's a > known issue. > > -- > Jeremy L. Stock <jstock@visi.com> > ICQ 46329337 > Fax # 612-629-6540 > ---------- Forwarded message ---------- > Date: Tue, 18 Jan 2000 22:14:44 -0600 (CST) > From: Jeremy L. Stock <jstock@isis.visi.com> > To: gandalf@vilnya.demon.co.uk > Subject: Creative ViBRA16X Problem > > I posted this on -current almost a week ago and only received one response > that didn't solve the problem. Audio hasn't played correctly for me since > December 27th. Now when I try to play audio, it just stutters. > > I'm not sure when it broke since I went from -current as of the 27th to > -current as of the 11th and now earlier today. The problem still remains > even after a total reinstall. > > I just wanted to make sure you were aware of it and make sure you had a > chance to correct it before 4.0R. Here's some info. Let me know if > you need anything else. > > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 4.0-CURRENT #0: Tue Jan 18 20:00:28 CST 2000 > root@nic-31-c23-178.mn.mediaone.net:/usr/src/sys/compile/NIC > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 350796057 Hz > CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) > Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 > Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> > AMD Features=0x80000800<SYSCALL,3DNow!> > real memory = 134217728 (131072K bytes) > avail memory = 127315968 (124332K bytes) > Preloaded elf kernel "kernel" at 0xc02c2000. > sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 > drq 0,1 on isa0 > sbc0: setting card to irq 10, drq 0, 1 > pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 > unknown0: <Game> at port 0x201 on isa0 > > And from boot -v (Let me know if I left an important section out) > > Trying Read_Port at 203 > CTL0043: start dependant > CTL0043: adding irq mask 0x20 > CTL0043: adding dma mask 0x2 > CTL0043: adding dma mask 0x8 > CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 > CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 > CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 > CTL0043: start dependant > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 > CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 > CTL0043: start dependant > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 > CTL0043: start dependant > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: start dependant > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 > CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 > CTL0043: start dependant > CTL0043: adding irq mask 0x6a0 > CTL0043: adding dma mask 0xb > CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 > CTL0043: end dependant > CTL7005: start dependant > CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 > CTL7005: start dependant > CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 > CTL7005: end dependant > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > sbc0: <Creative ViBRA16X> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 > sbc0: setting card to irq 10, drq 0, 1 > pcm0: <SB DSP 4.16 (ViBRA16X)> on sbc0 > pcm: setmap 2d000, 2000; 0xc7814000 -> 2d000 > pcm: setmap 2f000, 2000; 0xc7816000 -> 2f000 > unknown0: <Game> at port 0x201 on isa0 > > pnpinfo output: > > Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CTL00f0 (0xf0008c0e), Serial Number 0xffffffff > PnP Version 1.0, Vendor Version 16 > Device Description: Creative ViBRA16X PnP > > Logical Device ID: CTL0043 0x43008c0e #0 > Device Description: Audio > TAG Start DF > Good Configuration > IRQ: 5 - only one type (true/edge) > DMA: channel(s) 1 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 > [16-bit addr] > I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > TAG End DF > > Logical Device ID: CTL7005 0x05708c0e #1 > Compatible Device ID: PNPb02f (2fb0d041) > Device Description: Game > TAG Start DF > Good Configuration > I/O Range 0x201 .. 0x201, alignment 0x1, len 0x1 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1 > [16-bit addr] > TAG End DF > End Tag > > Successfully got 48 resources, 2 logical fdevs > -- card select # 0x0001 > > CSN CTL00f0 (0xf0008c0e), Serial Number 0xffffffff > > Logical device #0 > IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 > IRQ 10 0 > DMA 0 1 > IO range check 0x00 activate 0x01 > > Logical device #1 > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > I hope this is helpful and I appreciate the work you've put into this. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.21.0001212030320.4451-100000>