Date: Tue, 11 Dec 2001 22:33:28 -0500 From: jbw <j.bw@verizon.net> To: freebsd-questions@freebsd.org Subject: Re: Anyone using USB cameras with FreeBSD 4.4? Message-ID: <20011211223328.A1407@arem.peritian.com> In-Reply-To: <ILEALFKFCNJHKDLMPOEOCEPCBPAE.cmeiklejohn@conversent.com>; from cmeiklejohn@conversent.com on Tue, Dec 11, 2001 at 09:59:21PM -0500 References: <200112120147.RAA761627@meer.meer.net> <ILEALFKFCNJHKDLMPOEOCEPCBPAE.cmeiklejohn@conversent.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I figured it out by searching the questions archive but since it has been unavailable for a while now... when you plug in the camera to the USB port it registers in the message log i.e. Dec 11 22:22:00 arem /kernel: umass0: OLYMPUS C-4040ZOOM, rev 1.10/1.00, addr 2 Dec 11 22:22:00 arem /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Dec 11 22:22:00 arem /kernel: da0: <OLYMPUS C-4040ZOOM 1.00> Removable Direct Access SCSI-2 device Dec 11 22:22:00 arem /kernel: da0: 650KB/s transfers Dec 11 22:22:00 arem /kernel: da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C) then you just do the following mount_msdos /dev/da0s1 /mnt cd /mnt and then just copy the files over jbw On Tue, Dec 11, 2001 at 09:59:21PM -0500, Christopher Meiklejohn wrote: > I have a HP PhotoSmart 315. I could plug it in and the kernel would > immediately recognise it as > a USB mass storage device. I haven't done it in a while though, so I dunno > how much help I am to ya. > > It used to spit the device name assigned to it out in /var/log/messages. I > could just > mount that device afterwards and copy the stuff over. > > --Chris > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of George V. > Neville-Neil > Sent: Tuesday, December 11, 2001 8:47 PM > To: jbw > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: Anyone using USB cameras with FreeBSD 4.4? > > > > I'm using an Olympia C-4040Z with a USB connection. It's setup as a USB > mass > > storage device so I just plug it in, mount it and copy the files over. > > I tried this with a friend's camera but I kept getting "device not > configured" > on the mount. > > Can you give an example of how you mount this? > > Thanks, > George > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011211223328.A1407>