Date: Wed, 9 Sep 1998 18:22:02 +0200 (MET DST) From: Luigi Rizzo <luigi@labinfo.iet.unipi.it> To: net@FreeBSD.ORG Subject: dummynet now down to the bridging layer... Message-ID: <199809091622.SAA18286@labinfo.iet.unipi.it>
next in thread | raw e-mail | index | archive | help
I just finished the integration of dummynet and the bridging code,
and now you can do bandwidth limitation at the bridging level (this
means that you can put a dummynet-enabled bridge in the middle of
an ethernet cable without having to reconfigure routes etc.)
For those interested to try it, a floppy image is at
http://www.iet.unipi.it/~luigi/ip_dummynet/picobsd980909.bin
It comes up with userconfig, has pnp support, and drivers for
the following cards:
ed, de, fxp, vx, lnc
the fxp code is untested, so if someone wants to try it out... i don't
have such a card at the moment.
Before you ask: since the packet filter is ipfw, at the moment you can
only control IPv4 traffic -- other passes unchanged. I am considering
ipfw extensions to select other traffic basing at least on the ethernet
type field.
(source code will be available in a few days)
cheers
luigi
-----------------------------+--------------------------------------
Luigi Rizzo | Dip. di Ingegneria dell'Informazione
email: luigi@iet.unipi.it | Universita' di Pisa
tel: +39-50-568533 | via Diotisalvi 2, 56126 PISA (Italy)
fax: +39-50-568522 | http://www.iet.unipi.it/~luigi/
_____________________________|______________________________________
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199809091622.SAA18286>