Date: Sat, 12 Jul 2014 18:57:30 +0200 From: Daniele Mazzotti <kappei84@gmail.com> To: Anthony Jenkins <Anthony.B.Jenkins@att.net> Cc: freebsd-acpi@freebsd.org Subject: Re: ACPI support - Freebsd 10 on Sony Vaio VPCCA3C5E Message-ID: <CAC=ypSU3J3cPuEqDhrwAGm3MyNNGCc39W_4kTLJFbsYWjV5HoQ@mail.gmail.com> In-Reply-To: <CAC=ypSVbiOpTxUZeJnQUTMdjtbicu2JdG5p5g9%2BgR%2BS72-6RVg@mail.gmail.com> References: <CAC=ypSVopgcL82FpqJosmgFeRkeeevP0RG-GrAEZD2YQyi%2BPrg@mail.gmail.com> <53BF0546.70505@att.net> <CAC=ypSUe0_09pTMFsMKw4u3J=Kb8Q_uV0g6%2Bk_f2p1so3mnTgA@mail.gmail.com> <53BFCBF4.2090104@att.net> <CAC=ypSULmXU2HBpG2gf2J=9_o-sLccECud%2Be9KUg6-ppz7phww@mail.gmail.com> <CAC=ypSV36Dk_3a30OeCxmowqnM5iqcJkM%2B4qKgsOTNTEzmztSQ@mail.gmail.com> <53C020CE.8010205@att.net> <CAC=ypSV_qQ-EsfwJAa6NRiZhTvOi-xh9A=oFKXzNMj9GTpHbOA@mail.gmail.com> <53C02604.9070207@att.net> <CAC=ypSV=yXjnNYJTMSU3tDTjez9NAe3PqsDPRiF5sf2D6FBxRA@mail.gmail.com> <CAC=ypSVbiOpTxUZeJnQUTMdjtbicu2JdG5p5g9%2BgR%2BS72-6RVg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Guys, I have successfully compiled and installed the kernel with ACPI debug. @Anthony: my problem was definitely related to an outdated code base. So my question is now: "what should I do?". Is there any log or command I should issue in order to have a better understanding of the problem? Cheers, Daniele. 2014-07-11 23:26 GMT+02:00 Daniele Mazzotti <kappei84@gmail.com>: > Hi Anthony, > > here it is: $FreeBSD: release/10.0.0/Makefile 255784 2013-09-22 07:30:17Z > andrew $ > > I will try to check how it is possible to update the code base. > Cheers, > Daniele. > > > 2014-07-11 20:03 GMT+02:00 Daniele Mazzotti <kappei84@gmail.com>: > > Hi Anthony, >> >> Thanks for the good hint. I will be searching for the revision info as >> soon as I will be back home (3 hours from now more or less). >> >> Cheers, >> Daniele. >> Il 11/lug/2014 19:59 "Anthony Jenkins" <Anthony.B.Jenkins@att.net> ha >> scritto: >> >> Errrr... good question :-) I got mine from Subversion, so in '/usr/src' >>> I can run 'svn info' and see the revision. >>> >>> Your revision might be at the top of /usr/src/Makefile - it is in mine: >>> >>> # >>> # $FreeBSD: head/Makefile 268191 2014-07-02 22:34:06Z marcel $ >>> # >>> >>> I'm only wondering because it might be a bad copy. Might try getting >>> the sources again. >>> >>> Thanks, >>> Anthony >>> >>> On 07/11/2014 13:44, Daniele Mazzotti wrote: >>> > Actually I think I downloaded the source code back in May when I >>> updated >>> > from RC3 to the current version. >>> > >>> > How can I check the code revision on my machine? >>> > >>> > Cheers, >>> > Daniele. >>> > Il 11/lug/2014 19:37 "Anthony Jenkins" <Anthony.B.Jenkins@att.net> ha >>> > scritto: >>> > >>> >> I just tried a build of GENERIC + 'options ACPI_DEBUG' and it seems >>> to get >>> >> past the error you're seeing. What revision of the source code are >>> you >>> >> using... or where'd you get it from? >>> >> >>> >> Anthony >>> >> >>> >> On 07/11/2014 13:12, Daniele Mazzotti wrote: >>> >>> Hi guys, >>> >>> >>> >>> everything as planned! I am getting a compiling error :-). >>> >>> >>> >>> This is the way i managed to update the GENERIC kernel >>> >>> >>> >>> # Bus support. >>> >>> device acpi >>> >>> options ACPI_DEBUG # Debug support for ACPI >>> >>> device pci >>> >>> >>> >>> and this is the result of >>> >>> >>> >>> # *make buildkernel KERNCONF=MYKERNEL* >>> >>> >>> >>> >>> >>> ===> crypto (depend) >>> >>> @ -> /usr/src/sys >>> >>> awk -f @/tools/makeobjops.awk @/opencrypto/cryptodev_if.m -c >>> >>> >>> >>> make[4]: stopped in /usr/src/sys/modules/crypto >>> >>> *** Error code 2 >>> >>> >>> >>> Stop. >>> >>> make[3]: stopped in /usr/src/sys/modules >>> >>> *** Error code 1 >>> >>> >>> >>> Stop. >>> >>> make[2]: stopped in /usr/obj/usr/src/sys/GENERIC >>> >>> *** Error code 1 >>> >>> >>> >>> Stop. >>> >>> make[1]: stopped in /usr/src >>> >>> *** Error code 1 >>> >>> >>> >>> Stop. >>> >>> make: stopped in /usr/src >>> >>> >>> >>> I googled a bit, but I could not find any valuable help and actually >>> I do >>> >>> not know what could be wrong as the custom kernel is essentially the >>> >>> GENERIC with just one line added. >>> >>> Have you ever experienced such a problem? >>> >>> >>> >>> Cheers, >>> >>> Daniele. >>> >>> >>> >>> >>> >>> >>> >>> 2014-07-11 18:10 GMT+02:00 Daniele Mazzotti <kappei84@gmail.com>: >>> >>> >>> >>>> Hi guys, >>> >>>> >>> >>>> thanks again for the support. >>> >>>> >>> >>>> @Takanori: here you go http://pastebin.com/F0a2mZP4 >>> >>>> @Anthony: I will try to include the options in a custom kernel and >>> >> compile >>> >>>> it. As this is the first time after years I am compiling a custom >>> >> kernel it >>> >>>> will take a few time I guess. >>> >>>> >>> >>>> Just let me know if the output of the acpidump is of any help to >>> you. >>> >>>> Cheers, >>> >>>> Daniele. >>> >>>> >>> >>>> >>> >>>> 2014-07-11 13:35 GMT+02:00 Anthony Jenkins < >>> Anthony.B.Jenkins@att.net>: >>> >>>> >>> >>>> Hi Daniele, >>> >>>>> I was just going from acpi(4) man page; you'll likely have to >>> build a >>> >> new >>> >>>>> kernel with 'options ACPI_DEBUG' added to your kernel config file, >>> as I >>> >>>>> don't know if it's even possible to turn on the logging I want at >>> >> runtime. >>> >>>>> [ajenkins@ajenkins-hplaptop /usr/home/ajenkins]$ grep -i acpi >>> >>>>> /usr/src/sys/amd64/conf/MYKERNEL >>> >>>>> device acpi >>> >>>>> options ACPI_DEBUG >>> >>>>> >>> >>>>> I also have an 'options ACPI_DMAR' , but I don't recognize that >>> and you >>> >>>>> don't need that to debug your battery. >>> >>>>> >>> >>>>> Anthony >>> >>>>> >>> >>>>> On 07/11/2014 01:58, Daniele Mazzotti wrote: >>> >>>>>> Hello Anthony, >>> >>>>>> >>> >>>>>> thanks for the quick reply! I tried what you suggested. >>> >>>>>> >>> >>>>>> loader.conf: >>> >>>>>> >>> >>>>>> # Module for Windows Partition & Linux Mount >>> >>>>>> fuse_load="YES" >>> >>>>>> autoboot_delay="5" >>> >>>>>> #acpi_sony_load="YES" >>> >>>>>> >>> >>>>>> # Debugging Symbols for ACPI >>> >>>>>> debug.acpi.layer="ACPI_BATTERY" >>> >>>>>> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" >>> >>>>>> debug.acpi.enable_debug_objects="1" >>> >>>>>> >>> >>>>>> sysctl hw.acpi.battery: >>> >>>>>> >>> >>>>>> hw.acpi.battery.life: -1 >>> >>>>>> hw.acpi.battery.time: -1 >>> >>>>>> hw.acpi.battery.state: 7 >>> >>>>>> hw.acpi.battery.units: 1 >>> >>>>>> hw.acpi.battery.info_expire: 5 >>> >>>>>> >>> >>>>>> log/messages: >>> >>>>>> >>> >>>>>> cat /var/log/messages | grep acpi >>> >>>>>> >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi0: <Sony> on motherboard >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_ec0: <Embedded >>> Controller: >>> >> GPE >>> >>>>>> 0x17, ECDT> port 0x62,0x66 on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: hpet0: <High Precision Event >>> >> Timer> >>> >>>>>> iomem 0xfed00000-0xfed003ff on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: atrtc0: <AT realtime clock> >>> port >>> >>>>>> 0x70-0x77 irq 8 on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: attimer0: <AT timer> port >>> >>>>>> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_timer0: <24-bit timer at >>> >>>>>> 3.579545MHz> port 0x408-0x40b on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> >>> port >>> >>>>>> 0xcf8-0xcff on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: battery0: <ACPI Control Method >>> >>>>> Battery> >>> >>>>>> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_acad0: <AC Adapter> on >>> acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_lid0: <Control Method Lid >>> >>>>> Switch> >>> >>>>>> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_button0: <Power Button> >>> on >>> >>>>> acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on >>> acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on >>> acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: atkbdc0: <Keyboard controller >>> >>>>> (i8042)> >>> >>>>>> port 0x60,0x64 irq 1 on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: <Sony notebook >>> >>>>> controller> >>> >>>>>> on acpi0 >>> >>>>>> Jul 11 07:30:47 Von-Neumann kernel: acpi_sony0: PID 0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi0: <Sony> on motherboard >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_ec0: <Embedded >>> Controller: >>> >> GPE >>> >>>>>> 0x17, ECDT> port 0x62,0x66 on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: cpu0: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: cpu1: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: cpu2: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: cpu3: <ACPI CPU> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: hpet0: <High Precision Event >>> >> Timer> >>> >>>>>> iomem 0xfed00000-0xfed003ff on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: atrtc0: <AT realtime clock> >>> port >>> >>>>>> 0x70-0x77 irq 8 on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: attimer0: <AT timer> port >>> >>>>>> 0x40-0x43,0x50-0x53 irq 0 on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_timer0: <24-bit timer at >>> >>>>>> 3.579545MHz> port 0x408-0x40b on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: pcib0: <ACPI Host-PCI bridge> >>> port >>> >>>>>> 0xcf8-0xcff on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: battery0: <ACPI Control Method >>> >>>>> Battery> >>> >>>>>> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_acad0: <AC Adapter> on >>> acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_lid0: <Control Method Lid >>> >>>>> Switch> >>> >>>>>> on acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_button0: <Power Button> >>> on >>> >>>>> acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_tz0: <Thermal Zone> on >>> acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: acpi_tz1: <Thermal Zone> on >>> acpi0 >>> >>>>>> Jul 11 07:37:54 Von-Neumann kernel: atkbdc0: <Keyboard controller >>> >>>>> (i8042)> >>> >>>>>> port 0x60,0x64 irq 1 on acpi0 >>> >>>>>> >>> >>>>>> It seems to me the verbose debugging is either not enabled >>> (perhaps I >>> >>>>> made >>> >>>>>> some mistakes with the loader.conf) or the debug is really >>> enabled but >>> >>>>>> there is no special output on the wrong log file. Actually I am a >>> bit >>> >>>>>> puzzled as I am not a real expert "admin". I only enjoy getting my >>> >>>>> hands on >>> >>>>>> Unix on my desktop PC just for fun. >>> >>>>>> >>> >>>>>> However, do you think either I missed something or made anything >>> >> wrong? >>> >>>>>> I look forward to receiving from you. >>> >>>>>> >>> >>>>>> Cheers, >>> >>>>>> Daniele. >>> >>>>>> >>> >>>>>> >>> >>>>>> >>> >>>>>> 2014-07-10 23:27 GMT+02:00 Anthony Jenkins < >>> Anthony.B.Jenkins@att.net >>> >>> : >>> >>>>>>> On 07/10/2014 16:49, Daniele Mazzotti wrote: >>> >>>>>>>> Hello there, >>> >>>>>>>> >>> >>>>>>>> it is been a while since I finished installing Freebsd 10 on my >>> Sony >>> >>>>> Vaio >>> >>>>>>>> PC and resolving (or at least I am trying to) one by one, all >>> the >>> >>>>>>> problems >>> >>>>>>>> this hardware is giving me. Actually I cannot find a solution to >>> >>>>>>> correctly >>> >>>>>>>> display the battery level on my laptop. If I unplug my PC from >>> the >>> >>>>> power >>> >>>>>>>> and type 'sysctl hw.acpi.battery' this is the result I get: >>> >>>>>>>> >>> >>>>>>>> hw.acpi.battery.life: -1 >>> >>>>>>>> hw.acpi.battery.time: -1 >>> >>>>>>>> hw.acpi.battery.state: 7 >>> >>>>>>>> hw.acpi.battery.units: 1 >>> >>>>>>>> hw.acpi.battery.info_expire: 5 >>> >>>>>>>> >>> >>>>>>>> Moreover the suspend mode is giving me some problems as well, >>> but >>> >> this >>> >>>>>>> has >>> >>>>>>>> definitely a lower priority. >>> >>>>>>>> >>> >>>>>>>> I either tried to search for a solution on the FreeBSD Handook >>> with >>> >> no >>> >>>>>>>> luck, and google the problem a little bit, but I could not find >>> any >>> >>>>>>>> valuable help. I would be really interested to investigate the >>> >> problem >>> >>>>>>>> further. Is there anyone who can help me out with this and tell >>> me >>> >>>>> what >>> >>>>>>>> pieces of information are needed to better understand the >>> problem? >>> >>>>>>> Try enabling the ACPI_BATTERY layer and ACPI_LV_ALL_EXCEPTIONS >>> level >>> >> in >>> >>>>>>> /boot/loader.conf: >>> >>>>>>> >>> >>>>>>> debug.acpi.layer="ACPI_BATTERY" >>> >>>>>>> debug.acpi.level="ACPI_LV_ALL_EXCEPTIONS" >>> >>>>>>> debug.acpi.enable_debug_objects="1" # I assume this >>> is how >>> >>>>> you >>> >>>>>>> turn on ACPI debugging without recompiling the kernel with >>> 'options >>> >>>>>>> ACPI_DEBUG' >>> >>>>>>> >>> >>>>>>> and running 'sysctl hw.acpi.battery' again. Post >>> /var/log/messages >>> >>>>> ACPI >>> >>>>>>> messages about battery here. >>> >>>>>>> >>> >>>>>>> Anthony >>> >>>>>>> >>> >>>>>>>> Cheers, >>> >>>>>>>> Daniele. >>> >>>>>>>> _______________________________________________ >>> >>>>>>>> freebsd-acpi@freebsd.org mailing list >>> >>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> >>>>>>>> To unsubscribe, send any mail to " >>> >>>>> freebsd-acpi-unsubscribe@freebsd.org" >>> >>>>>> _______________________________________________ >>> >>>>>> freebsd-acpi@freebsd.org mailing list >>> >>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> >>>>>> To unsubscribe, send any mail to " >>> >> freebsd-acpi-unsubscribe@freebsd.org" >>> >>> _______________________________________________ >>> >>> freebsd-acpi@freebsd.org mailing list >>> >>> http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> >>> To unsubscribe, send any mail to " >>> freebsd-acpi-unsubscribe@freebsd.org" >>> >>> >>> >> >>> > _______________________________________________ >>> > freebsd-acpi@freebsd.org mailing list >>> > http://lists.freebsd.org/mailman/listinfo/freebsd-acpi >>> > To unsubscribe, send any mail to "freebsd-acpi-unsubscribe@freebsd.org >>> " >>> > >>> >>> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC=ypSU3J3cPuEqDhrwAGm3MyNNGCc39W_4kTLJFbsYWjV5HoQ>