Date: Mon, 12 Oct 2015 15:54:54 -0700 From: Paul Beard <paulbeard@gmail.com> Cc: FreeBSD-questions <questions@freebsd.org> Subject: Re: FreeBSD 10: no interfaces Message-ID: <C067A438-EF8B-46A3-B713-6DD0CE1B6399@gmail.com> In-Reply-To: <20151012124254.a2b39c50.freebsd@edvax.de> References: <0D1A75F9-ADD6-4FB8-8921-5C2196645D1C@gmail.com> <20151012124254.a2b39c50.freebsd@edvax.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> On Oct 12, 2015, at 3:42 AM, Polytropon <freebsd@edvax.de> wrote: >=20 > Network interfaces will only appear if the VM support has been > installed _and_ the VM environment has defined virtual network > interfaces (compatible with mentioned support). However, a > loopback device should allear withouth any configuration. I rebooted into 8.4 and the interfaces appear with the same = configuration in VirtualBox so I=E2=80=99m at a loss.=20 em0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu = 1500 options=3D9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 08:00:27:34:8b:65 inet 192.168.0.206 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseT <full-duplex>) status: active lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4=20 inet6 ::1 prefixlen 128=20 inet 127.0.0.1 netmask 0xff000000=20 nd6 options=3D3<PERFORMNUD,ACCEPT_RTADV> pfsync0: flags=3D0<> metric 0 mtu 1460 syncpeer: 224.0.0.240 maxupd: 128 pflog0: flags=3D0<> metric 0 mtu 33200 None of these appear in 10.2. I tried NAT (vs bridged) and still = nothing. I am rebuilding/reinstalling the vbox additions in 8.4 and will = try to boot into 10 to see if that helps.=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C067A438-EF8B-46A3-B713-6DD0CE1B6399>