Date: Wed, 09 Aug 2000 12:01:18 -0400 From: Mike Tancsa <mike@sentex.net> To: Joel Bjork <u98jobj@stud.hh.se> Cc: hardware@FreeBSD.ORG, questions@FreeBSD.ORG Subject: RE: forcing which SCSI device to boot from Message-ID: <4.3.2.7.0.20000809120051.0299c4a0@marble.sentex.ca> In-Reply-To: <XFMail.000809180122.u98jobj@stud.hh.se> References: <4.3.2.7.0.20000809111509.05e3b600@marble.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
At 06:01 PM 8/9/00 +0200, Joel Bjork wrote:
>On 09-Aug-00 Mike Tancsa wrote:
> >
> > I have an Adaptec 2940 and a 3ware IDE raid card. I have been booting from
> > the Adaptec, but when I put the 3ware card in, the drive insists on booting
> > from the 3ware. Apart from making a boot floppy disk, is there any way to
> > force the drive to boot from the Adaptec ?
> >
> > ---Mike
>Sounds like a BIOS issue, check the bootorder in the Bios, defaults are
>ususally: floppy, IDE, SCSI
Thanks, but I think the problem is that the BIOS sees the Adaptec and the
3ware card BOTH as SCSI devices.
---Mike
------------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications mike@sentex.net
Cambridge, Ontario Canada www.sentex.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.0.20000809120051.0299c4a0>