Date: Thu, 24 Jul 2003 15:22:09 +0200 From: Felix Deichmann <f.dei@web.de> To: freebsd-questions@freebsd.org Subject: Promise Ultra100 TX2 support broken? Message-ID: <3F1FDD81.1000904@web.de>
next in thread | raw e-mail | index | archive | help
Hi. I have a Promise Ultra100 TX2 card with 2 brand new Maxtor drives. The setup should work in UDMA100 mode, but is downgraded to PIO mode 4 under FreeBSD 5.1 and 4.8. Hardware is definitely OK, I have 2 controllers, 6 different 80 wire IDE cables, shielded and unshielded and no irq conflicts. Always the same problem. Disks work perfectly on an onboard VIA controller. The Promise BIOS is the latest. NetBSD also downgrades to PIO mode 4, in an i386 and an alpha. Maybe some registers not setup correctly by the driver(s)? dmesg excerpt: [...] atapci0: <Promise TX2 ATA100 controller> port 0xe080-0xe08f,0xe0a0-0xe0a3,0xe090-0xe097,0xe0a4-0xe0a7,0xe098-0xe09f mem 0x84000000-0x84003fff irq 10 at device 14.0 on pci 0 [...] ad4: 39205MB <Maxtor 6E040L0> [79656/16/63] at ata2-master UDMA100 [...] ad4: UDMA ICRC error reading fsbn 0 (ad4 bn 0; cn 0 tn 0 sn 0) retrying ad4: UDMA ICRC error reading fsbn 0 (ad4 bn 0; cn 0 tn 0 sn 0) retrying ad4: UDMA ICRC error reading fsbn 0 (ad4 bn 0; cn 0 tn 0 sn 0) retrying ad4: UDMA ICRC error reading fsbn 0 (ad4 bn 0; cn 0 tn 0 sn 0) falling back to PIO mode Help would be greatly appreciated! Regards Felix
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F1FDD81.1000904>