Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 7 Dec 2006 08:32:52 +0200
From:      a@zeos.net
To:        freebsd-questions@freebsd.org
Subject:   How to use ulpt driver?
Message-ID:  <20061207063252.GA769@host.my.domain>

next in thread | raw e-mail | index | archive | help
I get USB printer Canon PIXMA iP 2000 and attached it to my computer.

The kernel was compiled with:

# USB support
device		uhci		# UHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		umass		# Disks/Mass storage - Requires scbus and da

and sees the printer:

------------------------------------------------------------------------
$ dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #14: Thu Dec  7 07:15:51 EET 2006
    root@host.my.domain:/usr/obj/usr/src/sys/MYKERNEL
ACPI APIC Table: <MSISYS AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 1.50GHz (1511.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf12  Stepping = 2
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 805240832 (767 MB)
avail memory = 782880768 (746 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <MSISYS MSI ACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x40f7 on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xde000000-0xde0000ff irq 17 at device 1.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:02:44:92:18:75
pci2: <mass storage, SCSI> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 19 at device 31.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 23 at device 31.4 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel ICH2 (82801BA)> port 0xdc00-0xdcff,0xe000-0xe03f irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Canon iP2000, rev 1.10/1.05, addr 2
Timecounter "TSC" frequency 1511681224 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38204MB <SAMSUNG SV4002H QP100-12> at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-152L/C100> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s1a
rl0: link state changed to UP
------------------------------------------------------------------------

Now I loaded ulpt dinamically:

------------------------------------------------------------------------
$ kldstat
Id Refs Address    Size     Name
 1   14 0xc0400000 33dc1c   kernel
 2    1 0xc073e000 58554    acpi.ko
	.................
12    1 0xc45f1000 3000     ulpt.ko
------------------------------------------------------------------------

But no ulpt in /dev appeared:

------------------------------------------------------------------------
$ ls /dev
acd0		bpsm0		kbd0		random		ttyv9
acpi		console		klog		sndstat		ttyva
ad0		consolectl	kmem		stderr		ttyvb
ad0s1		ctty		log		stdin		ttyvc
ad0s1a		devctl		mdctl		stdout		ttyvd
ad0s1b		devstat		mem		sysmouse	ttyve
ad0s1c		dsp0.0		mixer0		ttyp0		ttyvf
ad0s1d		dsp0.1		net		ttyv0		ugen0
ad0s1e		dspW0.0		net1		ttyv1		ugen0.1
ad0s1f		dspW0.1		net2		ttyv2		ugen0.2
agpgart		dspr0.1		net3		ttyv3		urandom
apm		fd		network		ttyv4		usb
ata		fd0		null		ttyv5		usb0
atkbd0		fido		pci		ttyv6		usb1
audio0.0	geom.ctl	psm0		ttyv7		xpt0
audio0.1	io		ptyp0		ttyv8		zero
------------------------------------------------------------------------

What is wrong and how will I print?

Elisej Babenko



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061207063252.GA769>