From owner-freebsd-smp  Fri Jan 18  5:14:54 2002
Delivered-To: freebsd-smp@freebsd.org
Received: from zibbi.icomtek.csir.co.za (zibbi.icomtek.csir.co.za [146.64.24.58])
	by hub.freebsd.org (Postfix) with ESMTP id C116D37B404
	for <smp@FreeBSD.ORG>; Fri, 18 Jan 2002 05:14:04 -0800 (PST)
Received: (from jhay@localhost)
	by zibbi.icomtek.csir.co.za (8.11.6/8.11.6) id g0IDDIK68068;
	Fri, 18 Jan 2002 15:13:18 +0200 (SAT)
	(envelope-from jhay)
From: John Hay <jhay@icomtek.csir.co.za>
Message-Id: <200201181313.g0IDDIK68068@zibbi.icomtek.csir.co.za>
Subject: Re: problem with smp on intel motherboard
In-Reply-To: <3C481D68.C0791ECA@govital.net> from Chris Demers at "Jan 18, 2002 08:04:40 am"
To: admin@govital.net (Chris Demers)
Date: Fri, 18 Jan 2002 15:13:18 +0200 (SAT)
Cc: smp@FreeBSD.ORG
X-Mailer: ELM [version 2.4ME+ PL54 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-smp@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-smp.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-smp>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-smp>
X-Loop: FreeBSD.org

Looking at your mptable output, I only see one processor. Are you sure
you have two in the box? :-)

John
-- 
John Hay -- John.Hay@icomtek.csir.co.za / jhay@FreeBSD.org

> Revising post from other day, hope that someone can help...
> 
> Greetings,
> 
> I have been having no problems with the SMP kernel configuration just up
> to a week ago when I updated one of my last multi processor systems.
> I have two other systems and have no problems with them they are running
> superdot (XEON 500s) and asus (PIII 733s) motherboards and everything
> works fine.  I just did an update to 4.5-RC Tues Jan 15, 2002 and have
> completely lost SMP on an intel motherboard (PIII 500s).  I have tried
> to cvsup from source now about 4 times in the last two weeks with the
> same results on this same board.  It worked fine before when I was
> running 4.4-stable from about two months ago.  The kernel sees that it's
> running on a SMP board but does not launch or see the second processor
> properly.  Any help or suggestions would be appreciated.  I have double
> checked my kernel configuration and everything is right.  I have two
> other machines  I also have running that I also updated to 4.5-RC in the
> last week and they are fine.  Here are the log entries and mptable data:
> 
> 
> Jan 18 07:37:28 lists /kernel: Copyright (c) 1992-2002 The FreeBSD
> Project.
> Jan 18 07:37:28 lists /kernel: Copyright (c) 1979, 1980, 1983, 1986,
> 1988, 1989, 1991, 1992, 1993, 1994
> Jan 18 07:37:28 lists /kernel: The Regents of the University of
> California. All rights reserved.
> Jan 18 07:37:28 lists /kernel: FreeBSD 4.5-RC #1: Fri Jan 18 07:26:24
> EST 2002
> Jan 18 07:37:28 lists /kernel:
> admin@xxxxx.xxxxx.com:/usr/obj/server/src/sys/WEB003
> Jan 18 07:37:28 lists /kernel: Timecounter "i8254"  frequency 1193182 Hz
> Jan 18 07:37:28 lists /kernel: CPU: Pentium III/Pentium III Xeon/Celeron
> (497.44-MHz 686-class CPU)
> Jan 18 07:37:28 lists /kernel: Origin = "GenuineIntel"  Id = 0x673 
> Stepping = 3
> Jan 18 07:37:28 lists /kernel:
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> Jan 18 07:37:28 lists /kernel: real memory  = 805240832 (786368K bytes)
> Jan 18 07:37:28 lists /kernel: avail memory = 778059776 (759824K bytes)
> Jan 18 07:37:28 lists /kernel: Programming 24 pins in IOAPIC #0
> Jan 18 07:37:29 lists /kernel: IOAPIC #0 intpin 2 -> irq 0
> Jan 18 07:37:29 lists /kernel: FreeBSD/SMP: Multiprocessor motherboard
> Jan 18 07:37:29 lists /kernel: cpu0 (BSP): apic id:  0, version:
> 0x00040011, at 0xfee00000
> Jan 18 07:37:29 lists /kernel: io0 (APIC): apic id:  1, version:
> 0x00170011, at 0xfec00000
> Jan 18 07:37:29 lists /kernel: Preloaded elf kernel "kernel" at
> 0xc04a1000.
> Jan 18 07:37:29 lists /kernel: Pentium Pro MTRR support enabled
> Jan 18 07:37:29 lists /kernel: md0: Malloc disk
> Jan 18 07:37:29 lists /kernel: Using $PIR table, 12 entries at
> 0xc00fdf00
> Jan 18 07:37:29 lists /kernel: npx0: <math processor> on motherboard
> Jan 18 07:37:29 lists /kernel: npx0: INT 16 interface
> Jan 18 07:37:29 lists /kernel: pcib0: <Intel 82443GX host to PCI bridge>
> on motherboard
> Jan 18 07:37:29 lists /kernel: IOAPIC #0 intpin 19 -> irq 2
> Jan 18 07:37:29 lists /kernel: IOAPIC #0 intpin 21 -> irq 5
> Jan 18 07:37:29 lists /kernel: pci0: <PCI bus> on pcib0
> Jan 18 07:37:29 lists /kernel: pcib2: <Intel 82443GX (440 GX) PCI-PCI
> (AGP) bridge> at device 1.0 on pci0
> Jan 18 07:37:29 lists /kernel: pci1: <PCI bus> on pcib2
> Jan 18 07:37:29 lists /kernel: pcib3: <PCI to PCI bridge (vendor=1011
> device=0023)> at device 15.0 on pci1
> Jan 18 07:37:29 lists /kernel: IOAPIC #0 intpin 23 -> irq 7
> Jan 18 07:37:29 lists /kernel: pci2: <PCI bus> on pcib3
> Jan 18 07:37:29 lists /kernel: pcib4: <PCI to PCI bridge (vendor=8086
> device=0960)> at device 7.0 on pci2
> Jan 18 07:37:29 lists /kernel: pci3: <PCI bus> on pcib4
> Jan 18 07:37:29 lists /kernel: mlx0: <Mylex version 4 RAID interface>
> mem 0xfc000000-0xfc001fff irq 7 at device 7.1 on pci2
> Jan 18 07:37:29 lists /kernel: mlx0: DAC960PTL1, 1 channel, firmware
> 4.08-0-33, 8MB RAM
> Jan 18 07:37:29 lists /kernel: mlxd0: <Mylex System Drive> on mlx0
> Jan 18 07:37:29 lists /kernel: mlxd0: 26280MB (53821440 sectors) RAID 5
> (online)
> Jan 18 07:37:29 lists /kernel: ahc0: <Adaptec aic7896/97 Ultra2 SCSI
> adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 2 at device
> 12.0 on pci0
> Jan 18 07:37:29 lists /kernel: aic7896/97: Ultra2 Wide Channel A, SCSI
> Id=7, 32/255 SCBs
> Jan 18 07:37:29 lists /kernel: ahc1: <Adaptec aic7896/97 Ultra2 SCSI
> adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 2 at device
> 12.1 on pci0
> Jan 18 07:37:29 lists /kernel: aic7896/97: Ultra2 Wide Channel B, SCSI
> Id=7, 32/255 SCBs
> Jan 18 07:37:29 lists /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet>
> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 5
> at device
> 14.0 on pci0
> Jan 18 07:37:29 lists /kernel: fxp0: Ethernet address 00:d0:b7:88:72:3f
> Jan 18 07:37:29 lists /kernel: inphy0: <i82555 10/100 media interface>
> on miibus0
> Jan 18 07:37:29 lists /kernel: inphy0:  10baseT, 10baseT-FDX, 100baseTX,
> 100baseTX-FDX, auto
> Jan 18 07:37:29 lists /kernel: isab0: <Intel 82371AB PCI to ISA bridge>
> at device 18.0 on pci0
> Jan 18 07:37:29 lists /kernel: isa0: <ISA bus> on isab0
> Jan 18 07:37:29 lists /kernel: atapci0: <Intel PIIX4 ATA33 controller>
> port 0x2860-0x286f at device 18.1 on pci0
> Jan 18 07:37:29 lists /kernel: ata0: at 0x1f0 irq 14 on atapci0
> Jan 18 07:37:29 lists /kernel: ata1: at 0x170 irq 15 on atapci0
> Jan 18 07:37:29 lists /kernel: uhci0: <Intel 82371AB/EB (PIIX4) USB
> controller> port 0x2840-0x285f irq 5 at device 18.2 on pci0
> Jan 18 07:37:29 lists /kernel: usb0: <Intel 82371AB/EB (PIIX4) USB
> controller> on uhci0
> Jan 18 07:37:29 lists /kernel: usb0: USB revision 1.0
> Jan 18 07:37:29 lists /kernel: uhub0: Intel UHCI root hub, class 9/0,
> rev 1.00/1.00, addr 1
> Jan 18 07:37:29 lists /kernel: uhub0: 2 ports with 2 removable, self
> powered
> Jan 18 07:37:29 lists /kernel: Timecounter "PIIX"  frequency 3579545 Hz
> Jan 18 07:37:29 lists /kernel: chip1: <Intel 82371AB Power management
> controller> port 0x1040-0x104f at device 18.3 on pci0
> Jan 18 07:37:29 lists /kernel: pci0: <Cirrus Logic GD5480 SVGA
> controller> at 20.0
> Jan 18 07:37:29 lists /kernel: pcib1: <Intel 82443GX host to AGP bridge>
> on motherboard
> Jan 18 07:37:29 lists /kernel: pci4: <PCI bus> on pcib1
> Jan 18 07:37:29 lists /kernel: orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcafff on isa0
> Jan 18 07:37:29 lists /kernel: fdc0: <NEC 72065B or clone> at port
> 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> Jan 18 07:37:29 lists /kernel: fdc0: FIFO enabled, 8 bytes threshold
> Jan 18 07:37:29 lists /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> Jan 18 07:37:29 lists /kernel: atkbdc0: <Keyboard controller (i8042)> at
> port 0x60,0x64 on isa0
> Jan 18 07:37:29 lists /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on
> atkbdc0
> Jan 18 07:37:29 lists /kernel: kbd0 at atkbd0
> Jan 18 07:37:29 lists /kernel: vga0: <Generic ISA VGA> at port
> 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Jan 18 07:37:29 lists /kernel: sc0: <System console> at flags 0x100 on
> isa0
> Jan 18 07:37:29 lists /kernel: sc0: VGA <16 virtual consoles,
> flags=0x300>
> Jan 18 07:37:29 lists /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10
> on isa0
> Jan 18 07:37:29 lists /kernel: sio0: type 16550A
> Jan 18 07:37:30 lists /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
> Jan 18 07:37:30 lists /kernel: sio1: type 16550A
> Jan 18 07:37:30 lists /kernel: ppc0: parallel port not found.
> Jan 18 07:37:30 lists /kernel: APIC_IO: Testing 8254 interrupt delivery
> Jan 18 07:37:30 lists /kernel: APIC_IO: routing 8254 via IOAPIC #0
> intpin 2
> Jan 18 07:37:30 lists /kernel: Waiting 15 seconds for SCSI devices to
> settle
> Jan 18 07:37:30 lists /kernel: sa0 at ahc1 bus 0 target 0 lun 0
> Jan 18 07:37:30 lists /kernel: sa0: <SONY SDT-7000 0192> Removable
> Sequential Access SCSI-2 device 
> Jan 18 07:37:30 lists /kernel: sa0: 10.000MB/s transfers (10.000MHz,
> offset 15)
> 
> 
> 
> 
> ===============================================================================
> 
> MPTable, version 2.0.15
> 
> -------------------------------------------------------------------------------
> 
> MP Floating Pointer Structure:
> 
>   location:                     BIOS
>   physical address:             0x000f6ac0
>   signature:                    '_MP_'
>   length:                       16 bytes
>   version:                      1.4
>   checksum:                     0x46
>   mode:                         Virtual Wire
> 
> -------------------------------------------------------------------------------
> 
> MP Config Table Header:
> 
>   physical address:             0x0009f160
>   signature:                    'PCMP'
>   base table length:            264
>   version:                      1.4
>   checksum:                     0x35
>   OEM ID:                       'INTEL   '
>   Product ID:                   'Lancewood   '
>   OEM table pointer:            0x00000000
>   OEM table size:               0
>   entry count:                  26
>   local APIC address:           0xfee00000
>   extended table length:        164
>   extended table checksum:      209
> 
> -------------------------------------------------------------------------------
> 
> MP Config Base Table Entries:
> 
> --
> Processors:     APIC ID Version State           Family  Model   Step   
> Flags
>                  0       0x11    BSP, usable     6       7       3      
> 0x383fbff
> --
> Bus:            Bus ID  Type
>                  0       PCI   
>                  1       PCI   
>                  2       PCI   
>                  3       PCI   
>                  4       ISA   
> --
> I/O APICs:      APIC ID Version State           Address
>                  1       0x11    usable          0xfec00000
> --
> I/O Ints:       Type    Polarity    Trigger     Bus ID   IRQ    APIC ID
> PIN#
>                 ExtINT  active-hi        edge        4     0         
> 1    0
>                 INT     active-hi        edge        4     1         
> 1    1
>                 INT     active-hi        edge        4     0         
> 1    2
>                 INT     active-hi        edge        4     3         
> 1    3
>                 INT     active-hi        edge        4     4         
> 1    4
>                 INT     active-hi        edge        4     6         
> 1    6
>                 INT     active-hi        edge        4     8         
> 1    8
>                 INT     active-hi        edge        4    10         
> 1   10
>                 INT     active-hi        edge        4    12         
> 1   12
>                 INT     active-hi        edge        4    13         
> 1   13
>                 INT     active-hi        edge        4    14         
> 1   14
>                 INT     active-hi        edge        4    15         
> 1   15
>                 INT     active-lo       level        0  12:A         
> 1   19
>                 INT     active-lo       level        0  12:A         
> 1   19
>                 INT     active-lo       level        0  14:A         
> 1   21
>                 INT     active-lo       level        0  18:D         
> 1   21
>                 INT     active-lo       level        2   7:A         
> 1   23
> --
> Local Ints:     Type    Polarity    Trigger     Bus ID   IRQ    APIC ID
> PIN#
>                 ExtINT  active-hi        edge        4     0       
> 255    0
>                 NMI     active-hi        edge        0   0:A       
> 255    1
> 
> -------------------------------------------------------------------------------
> 
> MP Config Extended Table Entries:
> 
> --
> System Address Space
>  bus ID: 0 address type: I/O address
>  address base: 0x0
>  address range: 0x10000
> --
> System Address Space
>  bus ID: 0 address type: memory address
>  address base: 0x30000000
>  address range: 0xc6000000
> --
> System Address Space
>  bus ID: 0 address type: prefetch address
>  address base: 0xf6000000
>  address range: 0x6100000
> --
> System Address Space
>  bus ID: 0 address type: memory address
>  address base: 0xfc100000
>  address range: 0x2d00000
> --
> System Address Space
>  bus ID: 0 address type: memory address
>  address base: 0xfef00000
>  address range: 0x1100000
> --
> System Address Space
>  bus ID: 0 address type: memory address
>  address base: 0xa0000
>  address range: 0x20000
> --
> System Address Space
>  bus ID: 0 address type: memory address
>  address base: 0xcc000
>  address range: 0x1c000
> --
> Bus Heirarchy
>  bus ID: 4 bus info: 0x01 parent bus ID: 0
> --
> Compatibility Bus Address
>  bus ID: 0 address modifier: add
>  predefined range: 0x00000000
> --
> Compatibility Bus Address
>  bus ID: 0 address modifier: add
>  predefined range: 0x00000001
> 
> ===============================================================================
> 
> 
> #
> # GENERIC -- Generic kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> #    http://www.FreeBSD.org/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ./LINT configuration file. If you
> are
> # in doubt as to the purpose or necessity of a line, check first in
> LINT.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.37 2001/12/19 18:34:45
> iedowse Exp $
> 
> machine         i386
> #cpu            I386_CPU
> #cpu            I486_CPU
> cpu             I586_CPU
> cpu             I686_CPU
> ident           WEB003
> maxusers        0
> 
> #makeoptions    DEBUG=-g                #Build kernel with gdb(1) debug
> symbols
> 
> options         MATH_EMULATE            #Support for x87 emulation
> options         INET                    #InterNETworking
> options         INET6                   #IPv6 communications protocols
> options         FFS                     #Berkeley Fast Filesystem
> options         FFS_ROOT                #FFS usable as root device [keep
> this!]
> options         SOFTUPDATES             #Enable FFS soft updates support
> options         UFS_DIRHASH             #Improve performance on big
> directories
> options         MFS                     #Memory Filesystem
> options         MD_ROOT                 #MD is a potential root device
> options         NFS                     #Network Filesystem
> options         NFS_ROOT                #NFS usable as root device, NFS
> required
> options         MSDOSFS                 #MSDOS Filesystem
> options         CD9660                  #ISO 9660 Filesystem
> options         CD9660_ROOT             #CD-ROM usable as root, CD9660
> required
> options         PROCFS                  #Process filesystem
> options         COMPAT_43               #Compatible with BSD 4.3 [KEEP
> THIS!]
> options         SCSI_DELAY=15000        #Delay (in ms) before probing
> SCSI
> options         UCONSOLE                #Allow users to grab the console
> options         USERCONFIG              #boot -c editor
> options         VISUAL_USERCONFIG       #visual boot -c editor
> options         KTRACE                  #ktrace(1) support
> options         SYSVSHM                 #SYSV-style shared memory
> options         SYSVMSG                 #SYSV-style message queues
> options         SYSVSEM                 #SYSV-style semaphores
> options         P1003_1B                #Posix P1003_1B real-time
> extensions
> options         _KPOSIX_PRIORITY_SCHEDULING
> options         ICMP_BANDLIM            #Rate limit bad replies
> options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
> options         QUOTA
> 
> # To make an SMP kernel, the next two are needed
> options         SMP                     # Symmetric MultiProcessor
> Kernel
> options         APIC_IO                 # Symmetric (APIC) I/O
> 
> device          isa
> device          eisa
> device          pci
> 
> # Floppy drives
> device          fdc0    at isa? port IO_FD1 irq 6 drq 2
> device          fd0     at fdc0 drive 0
> device          fd1     at fdc0 drive 1
> #
> # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
> # don't use the above line for fdc0 but the following one:
> #device         fdc0
> 
> # ATA and ATAPI devices
> device          ata0    at isa? port IO_WD1 irq 14
> device          ata1    at isa? port IO_WD2 irq 15
> device          ata
> device          atadisk                 # ATA disk drives
> device          atapicd                 # ATAPI CDROM drives
> device          atapifd                 # ATAPI floppy drives
> device          atapist                 # ATAPI tape drives
> options         ATA_STATIC_ID           #Static device numbering
> 
> # SCSI Controllers
> device          ahb             # EISA AHA1742 family
> device          ahc             # AHA2940 and onboard AIC7xxx devices
> device          amd             # AMD 53C974 (Tekram DC-390(T))
> device          isp             # Qlogic family
> device          ncr             # NCR/Symbios Logic
> device          sym             # NCR/Symbios Logic (newer chipsets)
> options         SYM_SETUP_LP_PROBE_MAP=0x40
>                                 # Allow ncr to attach legacy NCR devices
> when 
>                                 # both sym and ncr are configured
> 
> device          adv0    at isa?
> device          adw
> device          bt0     at isa?
> device          aha0    at isa?
> device          aic0    at isa?
> 
> device          ncv             # NCR 53C500
> device          nsp             # Workbit Ninja SCSI-3
> device          stg             # TMC 18C30/18C50
> 
> # SCSI peripherals
> device          scbus           # SCSI bus (required)
> device          da              # Direct Access (disks)
> device          sa              # Sequential Access (tape etc)
> device          cd              # CD
> device          pass            # Passthrough device (direct SCSI
> access)
> 
> # RAID controllers interfaced to the SCSI subsystem
> device          asr             # DPT SmartRAID V, VI and Adaptec SCSI
> RAID
> device          dpt             # DPT Smartcache - See LINT for options!
> device          mly             # Mylex AcceleRAID/eXtremeRAID
> 
> # RAID controllers
> device          aac             # Adaptec FSA RAID, Dell PERC2/PERC3
> device          ida             # Compaq Smart RAID
> device          amr             # AMI MegaRAID
> device          mlx             # Mylex DAC960 family
> device          twe             # 3ware Escalade
> 
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device          atkbdc0 at isa? port IO_KBD
> device          atkbd0  at atkbdc? irq 1 flags 0x1
> device          psm0    at atkbdc? irq 12
> 
> device          vga0    at isa?
> 
> # splash screen/screen saver
> pseudo-device   splash
> 
> # syscons is the default console driver, resembling an SCO console
> device          sc0     at isa? flags 0x100
> 
> # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
> #device         vt0     at isa?
> #options        XSERVER                 # support for X server on a vt
> console
> #options        FAT_CURSOR              # start with block cursor
> # If you have a ThinkPAD, uncomment this along with the rest of the PCVT
> lines
> #options        PCVT_SCANSET=2          # IBM keyboards are non-std
> 
> # Floating point support - do not disable.
> device          npx0    at nexus? port IO_NPX irq 13
> 
> # Power management support (see LINT for more options)
> device          apm0    at nexus? disable flags 0x20 # Advanced Power
> Management
> 
> # PCCARD (PCMCIA) support
> device          card
> device          pcic0   at isa? irq 0 port 0x3e0 iomem 0xd0000
> device          pcic1   at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
> 
> # Serial (COM) ports
> device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
> device          sio1    at isa? port IO_COM2 irq 3
> device          sio2    at isa? disable port IO_COM3 irq 5
> device          sio3    at isa? disable port IO_COM4 irq 9
> 
> # Parallel port
> device          ppc0    at isa? irq 7
> device          ppbus           # Parallel port bus (required)
> device          lpt             # Printer
> device          plip            # TCP/IP over parallel
> device          ppi             # Parallel port interface device
> #device         vpo             # Requires scbus and da
> 
> 
> # PCI Ethernet NICs.
> device          de              # DEC/Intel DC21x4x (``Tulip'')
> device          txp             # 3Com 3cR990 (``Typhoon'')
> device          vx              # 3Com 3c590, 3c595 (``Vortex'')
> 
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use these
> NICs!
> device          miibus          # MII bus support
> device          dc              # DEC/Intel 21143 and various workalikes
> device          fxp             # Intel EtherExpress PRO/100B (82557,
> 82558)
> device          pcn             # AMD Am79C97x PCI 10/100 NICs
> device          rl              # RealTek 8129/8139
> device          sf              # Adaptec AIC-6915 (``Starfire'')
> device          sis             # Silicon Integrated Systems SiS 900/SiS
> 7016
> device          ste             # Sundance ST201 (D-Link DFE-550TX)
> device          tl              # Texas Instruments ThunderLAN
> device          tx              # SMC EtherPower II (83c170 ``EPIC'')
> device          vr              # VIA Rhine, Rhine II
> device          wb              # Winbond W89C840F
> device          wx              # Intel Gigabit Ethernet Card
> (``Wiseman'')
> device          xl              # 3Com 3c90x (``Boomerang'',
> ``Cyclone'')
> 
> # ISA Ethernet NICs.
> # 'device ed' requires 'device miibus'
> device          ed0     at isa? port 0x280 irq 10 iomem 0xd8000
> device          ex
> device          ep
> device          fe0     at isa? port 0x300
> # Xircom Ethernet
> device          xe
> # PRISM I IEEE 802.11b wireless NIC.
> device          awi
> # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
> # exists only as a PCMCIA device, so there is no ISA attachment needed
> # and resources will always be dynamically assigned by the pccard code.
> device          wi
> # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below
> will
> # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
> # mode (the factory default). If you set the switches on your ISA
> # card for a manually chosen I/O address and IRQ, you must specify
> # those parameters here.
> device          an
> # The probe order of these is presently determined by
> i386/isa/isa_compat.c.
> device          ie0     at isa? port 0x300 irq 10 iomem 0xd0000
> #device         le0     at isa? port 0x300 irq 5 iomem 0xd0000
> device          lnc0    at isa? port 0x280 irq 10 drq 0
> device          cs0     at isa? port 0x300
> device          sn0     at isa? port 0x300 irq 10
> 
> # Pseudo devices - the number indicates how many units to allocate.
> pseudo-device   loop            # Network loopback
> pseudo-device   ether           # Ethernet support
> pseudo-device   sl      1       # Kernel SLIP
> pseudo-device   ppp     1       # Kernel PPP
> pseudo-device   tun             # Packet tunnel.
> pseudo-device   pty             # Pseudo-ttys (telnet etc)
> pseudo-device   md              # Memory "disks"
> pseudo-device   gif             # IPv6 and IPv4 tunneling
> pseudo-device   faith   1       # IPv6-to-IPv4 relaying (translation)
> 
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device   bpf             #Berkeley packet filter
> 
> # USB support
> device          uhci            # UHCI PCI->USB interface
> device          ohci            # OHCI PCI->USB interface
> device          usb             # USB Bus (required)
> device          ugen            # Generic
> device          uhid            # "Human Interface Devices"
> device          ukbd            # Keyboard
> device          ulpt            # Printer
> device          umass           # Disks/Mass storage - Requires scbus
> and da
> device          ums             # Mouse
> device          uscanner        # Scanners
> device          urio            # Diamond Rio MP3 Player
> # USB Ethernet, requires mii
> device          aue             # ADMtek USB ethernet
> device          cue             # CATC USB ethernet
> device          kue             # Kawasaki LSI USB ethernet
> 
> 
> 
> 
> 
> Chris Demers
> admin@govital.net

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message