Date: Sat, 31 Aug 2013 14:22:58 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Harm Weites <harm@vevida.nl> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: TP-Link 1043ND - its tme :) Message-ID: <CAJ-Vmon9rQQNNXq1P-aVwLwUb1Lg9h4UGaaJKnpxzx7oacrP=A@mail.gmail.com> In-Reply-To: <1377974793.2748.33.camel@manbearpig> References: <29fffe4d56621c3b61e64a4e37dbae50.squirrel@arroway.org> <1377974793.2748.33.camel@manbearpig>
next in thread | previous in thread | raw e-mail | index | archive | help
Cool! How'd you build the MIPS versions of dropbear, etc? On 31 August 2013 11:46, Harm Weites <harm@vevida.nl> wrote: > Hi, > > For what its worth, this is my setup. I'm running 2 of the TP Link units > configured as Quagga routers, though the kernel is already running > behind quite a bit: > > FreeBSD 10.0-CURRENT #5 r249821M > > Mem: 10M Active, 2368K Inact, 11M Wired, 916K Cache, 1504K Buf, 1340K > Free (yes, I also installed top) > > Processes: > - dropbear > - dhcprelya > - ospfd > - zebra > - ospf6d > - hostapd > - dhclient > > The other unit is running bgpd (which is a massive binary) instead of > hostapd. I'm not using USB on either one them and I've removed several > of the binaries from the rootfs created by Adrian's scripts. I also left > out newfs stuff and the ability to do nfs mounts. > > Make sure you have MALLOC_PRODUCTION=YES in make.conf and configure > bin/build_freebsd to use it: > __MAKE_CONF=/etc/tplinkmake.conf SRCCONF=/dev/null > > Some changes to the TP-Link kernel config (sys/mips/conf/TP-WN1043ND): > > +options NBUF=128 > +nooptions INVARIANTS > +nooptions INVARIANT_SUPPORT > +nooptions WITNESS > +nooptions WITNESS_SKIPSPIN > +nooptions IEEE80211_DEBUG > +nooptions IEEE80211_SUPPORT_MESH > +nooptions IEEE80211_SUPPORT_TDMA > +nooptions IEEE80211_ALQ > +nooptions ATH_DEBUG > +nooptions ATH_DIAGAPI > +nooption ATH_ENABLE_11N > +nooption AH_DEBUG_ALQ > +nooptions AH_DEBUG > +nooption AH_DEBUG_ALQ > > Regards, > Harm > > _______________________________________________ > freebsd-mips@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mips > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmon9rQQNNXq1P-aVwLwUb1Lg9h4UGaaJKnpxzx7oacrP=A>