Date: Wed, 10 May 2000 13:39:55 -0400 From: Otter <otter@otter.cc> To: "Christopher T. Griffiths" <cgriffiths@quansoo.com> Cc: FreeBSD Questions List <freebsd-questions@FreeBSD.ORG> Subject: Re: IBM Thinkpad 600e and Sound Message-ID: <39199EEB.5EE5F110@otter.cc> References: <Pine.BSF.4.21.0005101318190.1846-100000@defiant.quansoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Chris, Aside from using pcm, you might want to also use another driver (like sba), specifying port, dma, similar to what i did with my old SB16. Or try it with the specs on pcm. device pcm0 at isa? port? irq 5 drq 1 flags 0x15 YMMV. I'd recommend reading the man page for csa, though. You might need a pcm/csa combo for it to work properly. -Otter "Christopher T. Griffiths" wrote: > > Hello, > > I am currently running 4.0 -stable on a Thinkpad 600e. I have the > following set in my kernel: > > device pcm > options PNPBIOS > > Unfortunatly I am not getting any sound and am getting the following > dmesg: > > csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> mem > 0x50000000-0x500 > fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 > pcm0: <CS461x PCM Audio> on csa0 > pcm0: ac97 codec reports dac not ready > > and > > unknown: <PNP0000> can't assign resources > unknown0: <PNP0200> at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0 > unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0 > unknown2: <PNP0b00> at port 0x70-0x73 irq 8 on isa0 > unknown3: <PNP0800> at port 0x61 on isa0 > unknown: <PNP0303> can't assign resources > unknown: <IBM3780> can't assign resources > unknown4: <PNP0c04> at port 0xf0-0xff irq 13 on isa0 > unknown: <PNP0700> can't assign resources > unknown5: <PNP0a03> at port 0xcf8-0xcff on isa0 > unknown6: <PNP0c02> at port > 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x1 > 5ef,0xef00-0xefaf iomem > 0-0x9ffff,0xf0000-0xfffff,0x100000-0x11ffffff,0xffff0000 > -0xffffffff on isa0 > unknown7: <PNP0400> at port 0x3bc-0x3bf irq 7 on isa0 > unknown: <PNP0501> can't assign resources > pcm1: <CS423x-PCI> at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq > 1,0 on > isa0 > unknown8: <CSC0110> at port 0x538-0x53f on isa0 > unknown9: <CSC0101> at port 0x200-0x207 on isa0 > unknown: <CSC0103> can't assign resources > unknown10: <IBM3765> at port 0x130-0x13f,0x2f8-0x2ff irq 3,10 drq 7 on > isa0 > unknown: <IBM0071> can't assign resources > unknown: <PNP0e03> can't assign resources > unknown: <PNP0680> can't assign resources > unknown: <PNP0680> can't assign resources > unknown11: <PNP0c02> on isa0 > > I have looked through the archives with various solutions but none seem to > help. Any suggestions would be great. > > Thanks > > Chris > > --- > Christopher T. Griffiths > Quansoo Group Inc. > cgriffiths@quansoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39199EEB.5EE5F110>