From owner-freebsd-multimedia Fri Mar 29 15:12: 5 2002 Delivered-To: freebsd-multimedia@freebsd.org Received: from and.engin.umich.edu (and.engin.umich.edu [141.213.42.26]) by hub.freebsd.org (Postfix) with ESMTP id CCBBB37B41E for ; Fri, 29 Mar 2002 15:11:27 -0800 (PST) Received: from localhost (agorski@localhost [127.0.0.1]) by and.engin.umich.edu (8.9.3/8.9.1) with ESMTP id SAA10206; Fri, 29 Mar 2002 18:11:26 -0500 (EST) Date: Fri, 29 Mar 2002 18:11:26 -0500 (EST) From: "Adam D. Gorski" To: John Utz Cc: Subject: Re: SB problem (was: Cat'ing /dev/audio) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hrm, no, I was told not to try that. I guess I could do that, but do I need to make some modifications in BSD as well? - Adam On Fri, 29 Mar 2002, John Utz wrote: ::that's an interesting result :: ::have you tried hardwiring the irq's in the bios? :: :: ::On Fri, 29 Mar 2002, Adam D. Gorski wrote: :: ::> Ok.. I compared dmesg versus pciconf -l, and I found this.. I dunno if this ::> means anything, but I figured I'd mention it... the first matching works, ::> which is for my 3Com card: ::> ::> * dmesg: ::> xl0: <3Com 3c900B-TPO Etherlink XL> port 0xd000-0xd07f mem ::> 0xe1000000-0xe100007f irq 9 at device 9.0 on pci0 ::> ::> * pciconf -l ::> xl0@pci0:9:0: class=0x020000 card=0x900410b7 chip=0x900410b7 rev=0x04 ::> hdr=0x00 ::> ::> So both show IRQ 9 (if I'm reading the output right) which seems fine.. ::> but.. check out my RTL and SB outputs: ::> ::> * dmesg ::> rl0: port 0x9800-0x98ff mem ::> 0xe0000000-0xe00000ff irq 11 at device 12.0 on pci0 ::> ::> pcm0: port 0xa000-0xa03f irq 10 at device 11.0 on pci0 ::> ::> * pciconf -l ::> rl0@pci0:12:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x10 ::> hdr=0x00 ::> ::> pcm0@pci0:11:0: class=0x040100 card=0x20001274 chip=0x58801274 rev=0x02 ::> hdr=0x00 ::> ::> ::> Ok, notice how one lists the SB @ IRQ 10, while the other shows it @ IRQ 11? ::> I dunno, just something that caught my eye based on the suggestions below. ::> ::> Maybe this helps, ::> ::> - Adam ::> ::> ::> On Fri, 29 Mar 2002 bdodson@scms.utmb.edu wrote: ::> ::> ::On 29 Mar, Adam D. Gorski wrote: ::> ::> Hey, ::> ::> ::> ::> Thanks for the response. I went into my BIOS and told it that I don't have a ::> ::> PnP OS, but the modules still did not detect the card. So I re-compiled the ::> ::> kernel with 'device pcm', and the card is detected once again, but the ::> ::> problems persist. I'm going to try some things that were suggested still, ::> ::> and hopefully I'll get at least a step closer to the solution. Thanks once ::> ::> again! ::> ::> ::> ::> - Adam ::> ::> ::> :: ::> ::Hmm... I'm out of ideas. The bare 'device pcm' is right for devices ::> ::being configured by pnp (as all pci devices are). 'device pcm0 ......' ::> ::is right for devices which need to be hand configured (only isa or ::> ::pccard devices). It sounds to me like you may have pci irq (or other ::> ::resource) conflicts. You might try to do ::> :: ::> ::pciconf -vl (as root) ::> :: ::> ::and see if anything shows up that looks obviously bogus. I'm sorry I ::> ::can't help you with the interpretation, but if you post the result to ::> ::the multimedia list, this may allow them to give you better help. ::> :: ::> ::Good luck, ::> ::Bud ::> :: ::> ::> On Fri, 29 Mar 2002 bdodson@scms.utmb.edu wrote: ::> ::> ::> ::> ::(reading your post via the archives, not subscribed to multimedia) ::> ::> :: ::> ::> ::I'm sure that someone will point out that FreeBSD is NOT a "PnP OS", so ::> ::> ::you need to set your BIOS to "PnP OS = NO". I have no idea whether that ::> ::> ::will fix your problem, but I know for sure setting it to YES is wrong. ::> ::> ::That is probably why the modules did not work right: nothing is ::> ::> ::configuring PNP. ::> ::> :: ::> ::> ::Good luck, ::> ::> ::Bud Dodson ::> ::> :: ::> :: ::> :: ::> ::-- ::> ::M. L. Dodson bdodson@scms.utmb.edu ::> ::409-772-2178 FAX: 409-772-1790 ::> :: ::> :: ::> ::> ::> To Unsubscribe: send mail to majordomo@FreeBSD.org ::> with "unsubscribe freebsd-multimedia" in the body of the message ::> :: ::-- :: ::John L. Utz III ::john@utzweb.net :: ::Idiocy is the Impulse Function in the Convolution of Life :: :: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message