Date: Tue, 6 Apr 1999 13:00:26 -0400 (EDT) From: Chuck Robey <chuckr@mat.net> To: Motonori Shindo <mshindo@ascend.co.jp> Cc: dkelly@hiwaay.net, luigi@labinfo.iet.unipi.it, freebsd-multimedia@FreeBSD.ORG Subject: Re: Luigi's driver, AOpen AW37, and me. Message-ID: <Pine.BSF.4.10.9904061259350.378-100000@picnic.mat.net> In-Reply-To: <19990406221307O.mshindo@ascend.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 6 Apr 1999, Motonori Shindo wrote: > Hi, > > Let me correct one thing I have reported earlier. > > From: Motonori Shindo <mshindo@ascend.co.jp> > Subject: Re: Luigi's driver, AOpen AW37, and me. > Date: Mon, 05 Apr 1999 12:33:05 +0900 > > > > Don't remember if I had a mic to try "cat < /dev/audio > /dev/audio". > > > > I did this but nothing happened. > > 'cat /dev/audio > /dev/audio' worked OK. Since the playbacked sound > was too weak, I had believed that it didn't play anything. Now I know > that it's playedback as expected. Not necessarily. Build xmix, and manually set the levels. I was really surprised, the default levels, both record and playback, are set really low. > > But I'm still experiencing an unacceptable level of noise in the > sound. The .au file I used shouldn't have any format problem since > it's playbacked normally on another machine with SoundBlaster16 > installed. > > I appreciate if anyone who has a working CS4236 or CS4237 card gives > me the result of pnpinfo command. I would like to compare it with > mine. Here's the pnpinfo on my machine: > > # pnpinfo > Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CSCd925 (0x25d9630e), Serial Number 0xffffffff > PnP Version 1.0, Vendor Version 4 > Device Description: AW37 Pro (Resource R2.0) > > Logical Device ID: CSC0000 0x0000630e #0 > Device Description: WSS/SB > TAG Start DF > Good Configuration > DMA: channel(s) 1 > 8-bit, not a bus master, count by byte, , Type A > DMA: channel(s) 0 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 - only one type (true/edge) > I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4 > [16-bit addr] > I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Acceptable Configuration > DMA: channel(s) 1 3 > 8-bit, not a bus master, count by byte, , Type A > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 7 9 10 11 12 15 - only one type (true/edge) > I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4 > [16-bit addr] > I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 7 9 10 11 12 15 - only one type (true/edge) > I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x3c8, alignment 0x8, len 0x4 > [16-bit addr] > I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10 > [16-bit addr] > TAG End DF > > Logical Device ID: CSC0001 0x0100630e #1 > Device Description: GAME > TAG Start DF > Good Configuration > I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8 > [16-bit addr] > TAG End DF > > Logical Device ID: CSC0010 0x1000630e #2 > Device Description: CTRL > I/O Range 0x120 .. 0x3a8, alignment 0x8, len 0x8 > [16-bit addr] > > Logical Device ID: CSC0003 0x0300630e #3 > Device Description: MPU > TAG Start DF > Good Configuration > IRQ: 9 - only one type (true/edge) > I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 9 10 11 12 15 - only one type (true/edge) > I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2 > [16-bit addr] > TAG End DF > End Tag > > Successfully got 46 resources, 4 logical fdevs > -- card select # 0x0001 > > CSN CSCd925 (0x25d9630e), Serial Number 0xffffffff > > Logical device #0 > IO: 0x0534 0x0388 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 5 0 > DMA 1 3 > IO range check 0x00 activate 0x01 > > Logical device #1 > IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > Logical device #2 > IO: 0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > Logical device #3 > IO: 0x0330 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 10 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > > ===================================== > Motonori Shindo > Systems Engineer > Ascend Communications Japan K.K. > email: mshindo@ascend.co.jp > TEL: +81-3-5325-7306 > ===================================== > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-multimedia" in the body of the message > ----------------------------+----------------------------------------------- Chuck Robey | Interests include any kind of voice or data chuckr@glue.umd.edu | communications topic, C programming, and Unix. 213 Lakeside Drive Apt T-1 | Greenbelt, MD 20770 | I run picnic (FreeBSD-current) (301) 220-2114 | and jaunt (Solaris7). ----------------------------+----------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9904061259350.378-100000>