Date: Thu, 08 Jan 1998 18:57:33 +0100 From: "hitzfeld@juradata.de" <hitzfeld@juradata.de> To: Volker Stolz <stolz@Pool.Informatik.RWTH-Aachen.DE> Cc: freebsd-isdn@FreeBSD.ORG Subject: Re: Trouble with S0.16 Message-ID: <34B5138D.1A55@juradata.de> References: <199801081244.NAA16013@peel.Informatik.RWTH-Aachen.DE>
next in thread | previous in thread | raw e-mail | index | archive | help
Volker Stolz wrote: > I have a Teles S0.16-board which is not detected on FreeBSD-boot-up. > It always says "tel0 not found at 0x...", of course I tested .. As far as I know there is no real problem to get it work, but you may apologize, I'M not a guru :-) Try to get bisdntest-3, read the README there and check if you came this way - Check the type of Teles S0.16 you have; perhaps look at some Linux/ Hisax-documentations to get an impression. Most probabliy you have a new type of card, which is to configure by software (do so under DOS) - Try to get the Teles work in another environment, in preference on the same system (under DOS, Windows ..) - Check iomem-collisions concerning Video or (!)Netadapters - If you take iomem 0xd0000 (16.3 is rather seldom I think) really type 0xd0000 and not 0xd000 - Why not trying irq 9 ? You can take irq 2 on the card, it's stable (here)- Timm Hitzfeld Juradata GmbH Muenchen
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?34B5138D.1A55>