Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 03 Aug 2001 09:17:21 -0400
From:      Jason Andresen <jandrese@mitre.org>
To:        Martin Schweizer <info@pc-service.ch>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>
Subject:   Re: Telnet
Message-ID:  <3B6AA461.CB44CF54@mitre.org>
References:  <3B3A719B@webmail.swiss-web.com> <3B69581D.B40756E@mitre.org> <20010802225924.A1023@pc-service.ch>

next in thread | previous in thread | raw e-mail | index | archive | help
Martin Schweizer wrote:
> 
> I test all the above terms with no success (results was allways the same)! I test it also in KDE2 (xterm).
> There it was much more better then under the console. How can resovle this?
> If you would I can e-mail you off-topic my account information at
> otaku.freeshell.org.

How are you setting TERM?  Where are you setting TERM?  If you run echo
$TERM
does it show the right thing?  You should see a difference with the
grieviously
wrong terminal settings. 

Do you have the same behavior with TERM=dumb?  If so, either you are
setting
the variable in the wrong place (it needs to be set on the remote
machine, 
not on the local one for telnet to work), or the environment on the
remote
machine is broken.

> > > >Windows telnet is a terrible emulator, but if you consider it to work
> > > >with
> > > >"no problems" as a vt100 terminal, then you should have no problem
> > > >getting
> > > >equivelent functionality out of FreeBSD with the right term variable.
> > > Which is your prefered TERM variable for telnet access?
> >
> > Unfortunatly it takes a bit of experimentation if the remote system is
> > not
> > FreeBSD based.
> >
> > If it is a FreeBSD system, try setting TERM to whatever the local
> > terminal
> > is set for (assuming all of the keys work on the local terminal).


-- 
  \  |_ _|__ __|_ \ __| Jason Andresen        jandrese@mitre.org
 |\/ |  |    |    / _|  Network and Distributed Systems Engineer
_|  _|___|  _| _|_\___| Office: 703-883-7755


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B6AA461.CB44CF54>