Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 11 Jun 2014 23:55:22 +0200 (CEST)
From:      Juergen Lock <nox@jelal.kn-bremen.de>
To:        hps@selasky.org
Cc:        freebsd-multimedia@FreeBSD.org
Subject:   Re: New version of webcamd, now v3.15.0.2
Message-ID:  <201406112155.s5BLtLOY087473@enceladus10.kn-bremen.de>
In-Reply-To: <53976DB5.1020800@selasky.org>

next in thread | previous in thread | raw e-mail | index | archive | help
In article <53976DB5.1020800@selasky.org> you write:
>Changes:
>  - Updated to latest V4L, Linux 3.15 sources
>
>svn --username anonsvn --password anonsvn \
>        checkout svn://svn.turbocat.net/i4b/trunk/ports
>
>Please test and report any regression issues to me or freebsd-multimedia.
>
1. My dual af9015 hangs vdr when it tries to access it (MSI DIGIVOX
   Duo, 0x1462:0x8801) - this one never really worked (a long time
   ago using only a single tuner of it worked, later even that got
   corrupted streams), and af9015 is old buggy hw anyway so I guess
   it's not that big a loss.

2. One of my rtl28xxu tuners webcamd doesn't like anymore, log added
   below (TerraTec Cinergy T Stick RC (Rev. 3). 0x0ccd:0x00d3.)

3. technisat-usb2, pctv452e, single and dual dib0700, dual af9035
   (using a single tuner), uvc, gspca, mceusb, ati_remote are working
   as before.

 Thanx! :)
	Juergen

rtl28xxu log:

Linux video capture interface: v2.00
lirc_dev: IR Remote Control driver registered, major 14 
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR LIRC bridge handler initialized
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
uvcvideo: Unable to create debugfs directory
USB Video Class driver (1.1.1)
cpia2: V4L-Driver for Vision CPiA2 based cameras v3.0.1
au0828 driver loaded
pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
pvrusb2: Debug mask is 31 (0x1f)
USBVision USB Video Device Driver for Linux : 0.9.11
em28xx: Registered (Em28xx v4l2 Extension) extension
em28xx: Registered (Em28xx dvb Extension) extension
Attached to ugen2.14[0]
DBG: : dvb_usbv2_probe: bInterfaceNumber=0
INFO: : : found a 'TerraTec Cinergy T Stick RC (Rev. 3)' in warm state
DBG: : dvb_usbv2_init:
DBG: : dvb_usbv2_device_power_ctrl: power=1
DBG: : rtl2832u_power_ctrl: onoff=1
DBG: : rtl28xxu_ctrl_msg: c0 00 01 30 00 02 01 00 <<< 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 01 30 10 02 01 00 >>> 0x802418110h
DBG: : rtl28xxu_ctrl_msg: c0 00 0b 30 00 02 01 00 <<< 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 0b 30 10 02 01 00 >>> 0x802418110h
DBG: : rtl28xxu_ctrl_msg: c0 00 00 30 00 02 01 00 <<< 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 00 30 10 02 01 00 >>> 0x802418110h
DBG: : rtl28xxu_ctrl_msg: c0 00 00 30 00 02 01 00 <<< 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 00 30 10 02 01 00 >>> 0x802418110h
DBG: : rtl28xxu_ctrl_msg: c0 00 00 30 00 02 01 00 <<< 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 00 30 10 02 01 00 >>> 0x802418110h
DBG: : rtl28xxu_ctrl_msg: 40 00 48 21 10 01 02 00 >>> 0x802418110h
DBG: : rtl2832u_read_config:
DBG: : rtl28xxu_ctrl_msg: c0 00 04 30 00 02 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 04 30 10 02 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: c0 00 03 30 00 02 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 03 30 10 02 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 20 01 11 00 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: c0 00 c6 00 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c6 00 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c0 00 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 ac 01 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c0 00 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c0 00 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c0 7e 00 03 02 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c0 d9 00 03 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: failed=-32
DBG: : rtl28xxu_ctrl_msg: c0 00 c8 02 00 03 01 00 <<< 0x802418130h
DBG: : rtl2832u_read_config: tuner=E4000
DBG: : rtl28xxu_ctrl_msg: 40 00 20 01 11 00 01 00 >>> 0x802418130h
DBG: : dvb_usbv2_i2c_init:
INFO: : : will pass the complete MPEG2 transport stream to the software demuxer
DBG: : dvb_usbv2_adapter_stream_init: adap=0
DBG: : usb_alloc_stream_buffers: all in all I will use 262144 bytes for streaming
DBG: : usb_alloc_stream_buffers: alloc buf=0 0x8024d5000 (dma 0)
DBG: : usb_alloc_stream_buffers: alloc buf=1 0x8024f5000 (dma 0)
DBG: : usb_urb_alloc_bulk_urbs: alloc urb=0
DBG: : usb_urb_alloc_bulk_urbs: alloc urb=1
DBG: : dvb_usbv2_adapter_dvb_init: adap=0
DVB: registering new adapter (TerraTec Cinergy T Stick RC (Rev. 3))
DBG: : dvb_usbv2_adapter_frontend_init: adap=0
DBG: : rtl2832u_frontend_attach:
DBG: i2c-129: rtl2832_attach:
INFO: i2c-129: Added multiplexed i2c bus 130
DBG: : rtl28xxu_ctrl_msg: c0 00 20 00 00 00 01 00 <<< 0x802418130h
INFO: i2c-129: Added multiplexed i2c bus 131
DBG: : dvb_register_frontend:
INFO: : DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
DBG: : dvb_frontend_clear_cache: Clearing cache for delivery system 3
DBG: : rtl2832u_tuner_attach:
DBG: : rtl2832u_tuner_attach: failed=-19
DBG: : dvb_usbv2_adapter_frontend_init: tuner_attach() failed=-19
DBG: : dvb_unregister_frontend:
DBG: : dvb_frontend_stop:
DBG: i2c-129: rtl2832_release:
DBG: : dvb_usbv2_adapter_frontend_init: failed=-19
DBG: : dvb_usbv2_adapter_init: failed=-19
DBG: : dvb_usbv2_device_power_ctrl: power=0
DBG: : rtl2832u_power_ctrl: onoff=0
DBG: : rtl28xxu_ctrl_msg: c0 00 01 30 00 02 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 01 30 10 02 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: c0 00 00 30 00 02 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 00 30 10 02 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: c0 00 00 30 00 02 01 00 <<< 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 00 30 10 02 01 00 >>> 0x802418130h
DBG: : rtl28xxu_ctrl_msg: 40 00 48 21 10 01 02 00 >>> 0x802418130h
DBG: : dvb_usbv2_init: failed=-19
DBG: : dvb_usbv2_exit:
DBG: : dvb_usbv2_remote_exit:
DBG: : dvb_usbv2_adapter_exit:
DBG: : dvb_usbv2_adapter_frontend_exit: adap=0
DBG: : dvb_usbv2_adapter_dvb_exit: adap=0
DBG: : dvb_usbv2_adapter_stream_exit: adap=0
DBG: : usb_urb_free_urbs: free urb=1
DBG: : usb_urb_free_urbs: free urb=0
DBG: : usb_free_stream_buffers: free buf=1
DBG: : usb_free_stream_buffers: free buf=0
DBG: : dvb_usbv2_i2c_exit:
DBG: : dvb_usbv2_probe: failed=-19
DBG: : dvb_usbv2_probe: bInterfaceNumber=1
DBG: : dvb_usbv2_exit:
DBG: : dvb_usbv2_remote_exit:
DBG: : dvb_usbv2_adapter_exit:
DBG: : dvb_usbv2_i2c_exit:
DBG: : dvb_usbv2_probe: failed=-19
webcamd: Cannot find USB device



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201406112155.s5BLtLOY087473>