Date: Mon, 14 Apr 2003 11:04:57 -0700 From: Scott Sewall <sewall@ix.netcom.com> To: freebsd-stable@freebsd.org Cc: sewall@ix.netcom.com Subject: XFree86 -configure failed: Bad V_BIOS checksum Message-ID: <3E9AF849.3030909@ix.netcom.com>
next in thread | raw e-mail | index | archive | help
New installation of 4.8-RELEASE on a new system. Installed XFree86 from packages: XFree86-4.3.0,1 X11/XFree86 core distribution (complete, using mini/m eta-po Running "XFree86 -configure" fails, locking the keyboard (but not the system) and making the system squeal like a pig. The last few lines of the XFree86.0.log (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) NV(0): initializing int10 (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear (==) NV(0): Write-combining range (0xc0000,0x40000) (WW) NV(0): Bad V_BIOS checksum (II) NV(0): Primary V_BIOS segment is: 0xc000 (==) NV(0): Write-combining range (0x0,0x1000) was already clear pciconf reports the following: none2@pci1:0:0: class=0x030000 card=0x040910b0 chip=0x018110de rev=0xa2 hdr=0x00 vendor = 'NVIDIA Corporation' device = 'GeForce4 MX 440SE with AGP 8X [NV18]' class = display subclass = VGA No XFree86Config.new is written out. Any ideas or suggestions would be greatly appreciated! Thanks! -- Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E9AF849.3030909>