Date: Tue, 5 Sep 2006 21:57:03 +0200 From: bsd <bsd@todoo.biz> To: Jonathan Horne <freebsd@dfwlp.com> Cc: Liste FreeBSD <freebsd-questions@freebsd.org> Subject: Re: ACPI won't shutdown Message-ID: <A5EB43BF-5C43-440D-AFB2-9E82260AFB9B@todoo.biz> In-Reply-To: <200609040832.48938.freebsd@dfwlp.com> References: <8891D729-276B-4922-A248-342D7EDE4CE3@todoo.biz> <200609040832.48938.freebsd@dfwlp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok,
Sorry for the delay.
My hardware is quite complicated.
Briefly : This is a bi-xeon with Intel motherboard (Intel Server =20
Board SE7520AF2).
I have two ATA RAID controler :
- A mirror of 2 disks for the system.
- One 3ware Model 9500S-12, 12 ports --> for the data (partition in 2 =20=
--> one RAID mirror 2 disks - one RAID 5 4 disks + one sapre).
Here is the output of dmesg :
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =20
reserved.
FreeBSD 6.1-RELEASE-p5 #0: Mon Sep 4 00:05:26 CEST 2006
root@tsuna.intranet.pac.fr:/usr/obj/usr/src/sys/SMP
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.01-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1
=20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
=20
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=3D0x20000000<LM>
Logical CPUs per core: 2
real memory =3D 3757965312 (3583 MB)
avail memory =3D 3678593024 (3508 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci9: <ACPI PCI bus> on pcib2
3ware device driver for 9000 series storage controllers, version: =20
3.60.02.012
twa0: <3ware 9000 series Storage Controller> port 0xd800-0xd8ff mem =20
0xfe9ffc00-0xfe9ffcff,0xfb800000-0xfbffffff irq 24 at device 1.0 on pci9
twa0: [FAST]
twa0: INFO: (0x15: 0x1300): Controller details:: Model 9500S-12, 12 =20
ports, Firmware FE9X 2.04.00.003, BIOS BE9X 2.03.01.047
pci7: <base peripheral, interrupt controller> at device 0.1 (no =20
driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci7
pci8: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port =20
0xc800-0xc83f mem 0xfe8c0000-0xfe8dffff irq 52 at device 4.0 on pci8
em0: Ethernet address: 00:07:e9:31:c0:d4
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port =20
0xcc00-0xcc3f mem 0xfe8e0000-0xfe8fffff irq 53 at device 4.1 on pci8
em1: Ethernet address: 00:07:e9:31:c0:d5
pci7: <base peripheral, interrupt controller> at device 0.3 (no =20
driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci4: <ACPI PCI bus> on pcib7
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xb400-0xb4ff mem =20
0xfe6d0000-0xfe6dffff,0xfe6c0000-0xfe6cffff irq 72 at device 5.0 on pci4
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=3D1.2.12.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 1 Active Volume (1 Max)
mpt0: 2 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem =20
0xfe6f0000-0xfe6fffff,0xfe6e0000-0xfe6effff irq 73 at device 5.1 on pci4
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=3D1.2.12.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt1: 0 Active Volumes (0 Max)
mpt1: 0 Hidden Drive Members (0 Max)
pci2: <base peripheral, interrupt controller> at device 0.1 (no =20
driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci2
pci3: <ACPI PCI bus> on pcib8
pci2: <base peripheral, interrupt controller> at device 0.3 (no =20
driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe400-0xe41f =20=
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe800-0xe81f =20=
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xec00-0xec1f =20=
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem =20
0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib9
pci1: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port =20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 =20
on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xce7ff,=20
0xce800-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd1fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =20
isa0
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E/1.9A> at ata0-slave UDMA33
Waiting 5 seconds for SCSI devices to settle
mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:0:0): Primary
(mpt0:0:1): Secondary
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:0): Physical (mpt0:0:0), Pass-thru (mpt0:1:0)
(mpt0:vol0:0): Online
(mpt0:vol0:1): Physical (mpt0:0:1), Pass-thru (mpt0:1:1)
(mpt0:vol0:1): Online
pass3 at mpt0 bus 1 target 0 lun 0
pass3: <IBM IC35L036UWDY10-0 S29A> Fixed unknown SCSI-3 device
pass3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged =20
Queueing Enabled
pass4 at mpt0 bus 1 target 1 lun 0
pass4: <IBM IC35L036UWDY10-0 S29A> Fixed unknown SCSI-3 device
pass4: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged =20
Queueing Enabled
da2 at mpt0 bus 0 target 0 lun 0
da2: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
da2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged =20
Queueing Enabled
da2: 34938MB (71553024 512 byte sectors: 255H 63S/T 4453C)
da0 at twa0 bus 0 target 0 lun 0
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
da0: 100.000MB/s transfers
da0: 1144377MB (2343684096 512 byte sectors: 255H 63S/T 145887C)
da1 at twa0 bus 0 target 1 lun 0
da1: <3ware Logical Disk 01 1.00> Fixed Direct Access SCSI-0 device
da1: 100.000MB/s transfers
da1: 381459MB (781228032 512 byte sectors: 255H 63S/T 48629C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/da2s1a
em0: link state changed to UP
Le 4 sept. 06 =E0 15:32, Jonathan Horne a =E9crit :
> On Monday 04 September 2006 06:17, bsd wrote:
>> Hello,
>>
>> I have configured a new server and everything goes find but ACPI.
>>
>> When Shutting down the server I have these messages :
>>
>> =85
>> All buffers synced.
>> Uptime: 5m2s
>> mpt0: Unhandled Event Notify Frame. Event 0x30
>> mpt1: Unhandled Event Notify Frame. Event 0x30
>> Shutting down ACPI
>>
>>
>> Then nothing !!
>>
>> Computer seems to freeze for an infinite amount of time. I have to
>> manually shutdown the computer with the Power button !
>>
>>
>> Any idea ?
>> ________________________________________________
>
>
> tell is a little about your hardware? i have a system that does =20
> this exact
> same behavior. mine is;
>
> supermicro 370DE6
> dual pentium 3 1000
> 2048MB ECC-Reg'd PC133
> an older samsung cdrw (this is the only ide device in the system)
> 3ware 6800 raid controller with 3 raid units (20GB R1, 80GB R1, =20
> 335GB R5)
>
> my system exhibits the exact sme behavior you describe, but i too =20
> have no idea
> why. system has always had no trouble with acpi
>
>
> cheers,
> jonathan
________________________________________________
=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=
=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7
=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=
=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz
________________________________________________
=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=
=BB=A7=AB?=BB=A5=AB?=BB=A7=AB?=BB=A5=AB?=BB=A7
=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=
=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF=AF
P "Please consider your environmental responsibility before printing =20
this e-mail"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A5EB43BF-5C43-440D-AFB2-9E82260AFB9B>