Date: Thu, 5 Apr 2001 15:28:41 -0400 From: "First, Tim" <firsttim@msu.edu> To: "'freebsd-alpha@freebsd.org'" <freebsd-alpha@freebsd.org> Subject: 4.3RC2 on AlphaServer 2100A (Lynx) Message-ID: <17F0EC17EF87D311BF65009027D3C39D0118F78F@ais.msu.edu>
next in thread | raw e-mail | index | archive | help
I have been attempting to install 4.3RC2 on an AlphaServer 2100A with no
luck. I previously tried with 4.2 and learned after reading that there was
no support for the Lynx on 4.2. I was hoping that we would be able to get
this up on 4.3RC2, but have had no luck so far. Any ideas, suggestions, or
help would be much appreciated. Below is a complete log of the boot with a
show, show config and the boot of the 4.3RC2 cd.
Thanks for your help,
-tim
base = 200000, image_start = 0, image_bytes = 2c800
initializing HWRPB at 2000
initializing page table at 4fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
VMS PALcode V1.20-3, OSF PALcode V1.22-1
starting console on CPU 0
Testing Memory bank 0
Testing Memory bank 1
Testing Memory bank 2
Testing Memory bank 3
Configuring Memory Modules
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 2, slot 1 -- pka -- NCR 53C810
bus 2, slot 6 -- dra -- Mylex DAC960
bus 2, slot 7 -- ewa -- DECchip 21140-AA
bus 0, slot 6 -- drb -- Mylex DAC960
bus 0, slot 7 -- ewb -- DECchip 21140-AA
bus 0, slot 9 -- vga -- S3 Trio64/Trio32
starting console on CPU 1
starting console on CPU 2
os_type: UNIX - console CIPCA driver not started
Memory Testing and Configuration Status
Module Size Base Addr Intlv Mode Intlv Unit Status
------ ----- --------- ---------- ---------- ------
0 512MB 00000000 2-Way 0 Passed
1 512MB 00000000 2-Way 1 Passed
2 128MB 40000000 2-Way 0 Passed
3 128MB 40000000 2-Way 1 Passed
Total Bad Pages 0
Testing the System
Testing the Disks (read only)
Testing the Network
AlphaServer 2100A Console V5.3-14, built on Oct 16 1998 at 15:28:19
P00>>>sho
auto_action HALT
boot_dev
boot_file
boot_osflags 0
boot_reset ON
bootdef_dev
booted_dev
booted_file
booted_osflags
bus_probe_algorithm new
char_set 0
com1_baud 9600
com1_flow SOFTWARE
com1_modem OFF
com2_baud 9600
com2_flow SOFTWARE
com2_modem OFF
console serial
controlp ON
cpu_enabled ff
d_bell off
d_cleanup on
d_complete off
d_eop off
d_group field
d_harderr halt
d_loghard on
d_logsoft off
d_omit
d_oper on
d_passes 1
d_quick off
d_report full
d_runtime 0
d_softerr halt
d_startup off
d_status off
d_trace off
d_verbose 0
dump_dev
enable_audit ON
ewa0_arp_tries 3
ewa0_bootp_file
ewa0_bootp_server
ewa0_bootp_tries 3
ewa0_def_ginetaddr 0.0.0.0
ewa0_def_inetaddr 0.0.0.0
ewa0_def_inetfile
ewa0_def_sinetaddr 0.0.0.0
ewa0_def_subnetmask 0.0.0.0
ewa0_ginetaddr 0.0.0.0
ewa0_inet_init bootp
ewa0_inetaddr 0.0.0.0
ewa0_inetfile
ewa0_loop_count 2
ewa0_loop_inc d0
ewa0_loop_patt ffffffff
ewa0_loop_size 100
ewa0_lp_msg_node 8
ewa0_mode AUI
ewa0_protocols MOP
ewa0_sinetaddr 0.0.0.0
ewa0_tftp_tries 3
ewb0_arp_tries 3
ewb0_bootp_file
ewb0_bootp_server
ewb0_bootp_tries 3
ewb0_def_ginetaddr 0.0.0.0
ewb0_def_inetaddr 0.0.0.0
ewb0_def_inetfile
ewb0_def_sinetaddr 0.0.0.0
ewb0_def_subnetmask 0.0.0.0
ewb0_ginetaddr 0.0.0.0
ewb0_inet_init bootp
ewb0_inetaddr 0.0.0.0
ewb0_inetfile
ewb0_loop_count 2
ewb0_loop_inc d0
ewb0_loop_patt ffffffff
ewb0_loop_size 100
ewb0_lp_msg_node 8
ewb0_mode Fast
ewb0_protocols MOP
ewb0_sinetaddr 0.0.0.0
ewb0_tftp_tries 3
exdep_data 0
exdep_location 0
exdep_size 0
exdep_space pmem
exdep_type 3
external_mb ON
full_powerup_diags ON
heap_expand NONE
i g
j u
kbd_hardware_type PCXAL
language 36
language_name English (American)
license MU
ocp_text
ocp_text_default Model 4/200
os_type UNIX
pal VMS PALcode V1.20-3, OSF PALcode V1.22-1
pci_arb Partial-Rotating
pci_parity ON
pka0_disconnect 1
pka0_fast 1
pka0_host_id 7
rcm_answer
rcm_dialout
rcm_init
screen_mode ON
scsi_poll ON
scsi_reset ON
scsnode
scssystemid 65534
scssystemidh 0
srm2dev
sys_serial_num
tga_sync_green 8
tt_allow_login 1
tty_dev 0
version V5.3-14 Oct 16 1998 15:28:19
P00>>>show conf
Digital Equipment Corporation
AlphaServer 2100A 5/250
SRM Console V5.3-14 VMS PALcode V1.20-3, OSF PALcode V1.22-1
Component Status Module ID
CPU 0 P B2040-AB DECchip (tm) 21164-5
CPU 1 P B2040-AB DECchip (tm) 21164-5
CPU 2 P B2040-AB DECchip (tm) 21164-5
Memory 0 P B2022-FA 512 MB
Memory 1 P B2022-FA 512 MB
Memory 2 P B2021-FA 128 MB
Memory 3 P B2022-DA 128 MB
I/O 24283-01
dva0.0.0.1000.0 RX26/RX23
Slot Option Hose 0, Bus 0, PCI
2 Intel 82375 Bridge to Bus 1,
EISA
3 DECchip 21050-AA Bridge to Bus 2, PCI
6 Mylex DAC960 drb.0.0.6.0
drb0.0.0.6.0 6 Member RAID 5
drb1.0.0.6.0 6 Member RAID 5
drb2.0.0.6.0 6 Member RAID 5
7 DECchip 21140-AA ewb0.0.0.7.0 00-00-F8-01-84-89
9 S3 Trio64/Trio32
Slot Option Hose 0, Bus 1, EISA
Slot Option Hose 0, Bus 2, PCI
1 NCR 53C810 pka0.7.0.2001.0 SCSI Bus ID 7
dka0.0.0.2001.0 RZ28D
dka100.1.0.2001.0 RZ28D
dka500.5.0.2001.0 RRD45
mka600.6.0.2001.0 TLZ07
6 Mylex DAC960 dra.0.0.2006.0
dra0.0.0.2006.0 6 Member RAID 5
dra1.0.0.2006.0 6 Member RAID 5
7 DECchip 21140-AA ewa0.0.0.2007.0 00-00-F8-01-81-09
P00>>>boot dka500
(boot dka500.5.0.2001.0 -flags 0)
block 0 of dka500.5.0.2001.0 is a valid boot block
reading 356 blocks from dka500.5.0.2001.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 2c800
initializing HWRPB at 2000
initializing page table at 4fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x4000300010114
OSF PAL rev: 0x4000100020116
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 0.1
(jkh@beast.freebsd.org, Mon Mar 20 21:08:56 GMT 2000)
Memory: 1310720 k
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-> echo
\007\007
> autoboot 10
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds...
Booting [kernel] in 8 seconds...
Booting [kernel] in 7 seconds...
Booting [kernel] in 6 seconds...
Booting [kernel]...
\|/- (EDITED TO REMOVE DUPLICATION)
/kernel data=0x5f9198+0x27868
\|/- (EDITED TO REMOVE DUPLICATION)
Entering kernel at 0xfffffc000032b740...
Unrecognized boot flag '0'.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RC2 #1: Sat Mar 31 00:13:44 GMT 2001
root@jkh234.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS
DEC AlphaServer 2100A
AlphaServer 2100A 5/250, 250MHz
8192 byte page size, 3 processors.
CPU: EV5 (21164) major=5 minor=5
OSF PAL rev: 0x4000100020116
real memory = 1340006400 (1308600K bytes)
avail memory = 1296769024 (1266376K bytes)
Preloaded elf kernel "kernel" at 0xfffffc0000924000.
md1: Malloc disk
t20: using interrupt type 1 on pci bus 0
halted CPU 0
halt code = 7
machine check while in PAL mode
PC = 1608c
P00>>>
----
Timothy D. First, MCSE, CNA firsttim@msu.edu
Information Technologist II (517) 353-4420 x335
Administrative Information Services Fax: (517) 355-5176
Michigan State University
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17F0EC17EF87D311BF65009027D3C39D0118F78F>