Date: Wed, 19 Nov 2003 17:24:50 +0000 From: Scott Mitchell <scott+freebsd@fishballoon.org> To: Francisco Reyes <lists@natserv.com> Cc: Nico Meijer <nico@familiemeijer.org> Subject: Re: Mini atx for firewall Message-ID: <20031119172450.GF5731@llama.fishballoon.org> In-Reply-To: <20031119113741.G21173@zoraida.natserv.net> References: <20031119092126.X20731@zoraida.natserv.net> <3FBB8832.1010104@familiemeijer.org> <20031119152100.GE5731@llama.fishballoon.org> <20031119113741.G21173@zoraida.natserv.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Nov 19, 2003 at 11:39:01AM -0500, Francisco Reyes wrote: > On Wed, 19 Nov 2003, Scott Mitchell wrote: > > > On Wed, Nov 19, 2003 at 04:11:46PM +0100, Nico Meijer wrote: > ..... > > > It was a ME6000 (fanless 600Mhz machine): > .... > > > I'm using a USB Ethernet adapter for the 'outside' interface on my ME6000, > > since I needed the PCI slot for the wireless card. > > > Where did you get your ME6000 from? > Which USB ethernet adapter? I think I got most of it from http://www.linitx.com/ It's a Linksys USB100TX adapter. Some of these (including mine) don't work on a 100Mbps connection with our aue(4) driver - even forcing it to 10Mbps mode didn't help. Fortunately my cable modem is 10Mbps only. I've heard that some folks Linksys adapters don't have this problem. Belkin also make an adapter that runs with aue(4) - this gave me no problems whatsoever even in 100Mbps mode; unfortunately I had to give it back :-) Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031119172450.GF5731>