Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Apr 2007 13:11:02 +0300
From:      Stefan Lambrev <stefan.lambrev@sun-fish.com>
To:        freebsd-amd64@freebsd.org
Subject:   panic: No BIOS smap info from loader!
Message-ID:  <4631CC36.8080808@sun-fish.com>

next in thread | raw e-mail | index | archive | help
Hello,

I'm trying to install FreeBSD 6.2-Release amd64 on HP Compaq dx7300
Immediately after the boot menu when starting to boot the kernel I got th=
is:
panic: No BIOS smap info from loader!

I escape to boot loader next time and type "smap" it just returned empty =

line.
When I boot from i386 disk, "smap" again return empty line, but it boot=20
fine.
This seems to be the same issue as:=20
http://www.freebsd.org/cgi/query-pr.cgi?pr=3D111955
i386 boot/install fine so I'm attaching dmesg and pciconf -vl from i386=20
if this can help.

dmesg:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.=

FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #3: Wed Apr 25 07:40:24 UTC 2007
    root@shitler.cmotd.com:/usr/obj/usr/src/sys/CORE-SMP
acpi_alloc_wakeup_handler: can't alloc wake memory
ACPI APIC Table: <COMPAQ BROADH2O>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2992.52-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0xf65  Stepping =3D 5
 =20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=3D0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=3D0x20100000<NX,LM>
  AMD Features2=3D0x1<LAHF>
  Cores per package: 2
real memory  =3D 1048248320 (999 MB)
avail memory =3D 1019310080 (972 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 6.3.9> port=20
0x2000-0x201f mem 0xf0500000-0xf051ffff,0xf0524000-0xf0524fff irq 19 at=20
device 25.0 on pci0
em0: Ethernet address: 00:0f:fe:4e:78:16
uhci0: <UHCI (generic) USB controller> port 0x2020-0x203f irq 20 at=20
device 26.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x2040-0x205f irq 21 at=20
device 26.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0525000-0xf05253ff irq =

22 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci32: <ACPI PCI bus> on pcib1
uhci2: <UHCI (generic) USB controller> port 0x2060-0x207f irq 20 at=20
device 29.0 on pci0
uhci2: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x2080-0x209f irq 21 at=20
device 29.1 on pci0
uhci3: [GIANT-LOCKED]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0525400-0xf05257ff irq =

20 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib2
re0: <Linksys EG1032 (RTL8169S) Gigabit Ethernet> port 0x1000-0x10ff mem =

0xf0802000-0xf08020ff irq 20 at device 4.0 on pci7
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=20
1000baseT-FDX, auto
re0: Ethernet address: 00:18:f8:09:05:3d
re0: [FAST]
ohci0: <NEC uPD 9210 USB controller> mem 0xf0800000-0xf0800fff irq 21 at =

device 9.0 on pci7
ohci0: [GIANT-LOCKED]
usb6: OHCI version 1.0
usb6: <NEC uPD 9210 USB controller> on ohci0
usb6: USB revision 1.0
uhub6: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xf0801000-0xf0801fff irq 22 at =

device 9.1 on pci7
ohci1: [GIANT-LOCKED]
usb7: OHCI version 1.0
usb7: <NEC uPD 9210 USB controller> on ohci1
usb7: USB revision 1.0
uhub7: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub7: 2 ports with 2 removable, self powered
ehci2: <NEC uPD 720100 USB 2.0 controller> mem 0xf0802100-0xf08021ff irq =

23 at device 9.2 on pci7
ehci2: [GIANT-LOCKED]
usb8: EHCI version 1.0
usb8: companion controllers, 3 ports each: usb6 usb7
usb8: <NEC uPD 720100 USB 2.0 controller> on ehci2
usb8: USB revision 2.0
uhub8: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub8: 5 ports with 5 removable, self powered
umass0: Generic USB2.0-CRW, rev 2.00/11.0d, addr 2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8 SATA300 controller> port=20
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20e0-0x20ef,0x20f0-0x20ff irq 18=20
at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 =

on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on=20
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 2000
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 =

on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem=20
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=

Timecounters tick every 1.000 msec
ad0: 152627MB <Seagate ST3160812AS 3.AHL> at ata0-master SATA150
ad1: 152627MB <MAXTOR STM3160811AS 3.AAE> at ata0-slave SATA150
acd0: DVDR <HL-DT-STDVD+-RW GSA-H31L/1.05> at ata1-master SATA150
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad1s1a
re0: link state changed to UP

pciconf -vl:

hostb0@pci0:0:0:        class=3D0x060000 card=3D0x2800103c chip=3D0x29908=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D bridge
    subclass   =3D HOST-PCI
none0@pci0:2:0: class=3D0x030000 card=3D0x2800103c chip=3D0x29928086 rev=3D=
0x02=20
hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D display
    subclass   =3D VGA
none1@pci0:3:0: class=3D0x078000 card=3D0x2800103c chip=3D0x29948086 rev=3D=
0x02=20
hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D simple comms
em0@pci0:25:0:  class=3D0x020000 card=3D0x2800103c chip=3D0x104a8086 rev=3D=
0x02=20
hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D network
    subclass   =3D ethernet
uhci0@pci0:26:0:        class=3D0x0c0300 card=3D0x2800103c chip=3D0x28348=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
uhci1@pci0:26:1:        class=3D0x0c0300 card=3D0x2800103c chip=3D0x28358=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
ehci0@pci0:26:7:        class=3D0x0c0320 card=3D0x2800103c chip=3D0x283a8=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
none2@pci0:27:0:        class=3D0x040300 card=3D0x2800103c chip=3D0x284b8=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D multimedia
pcib1@pci0:28:0:        class=3D0x060400 card=3D0x2800103c chip=3D0x283f8=
086=20
rev=3D0x02 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    class      =3D bridge
    subclass   =3D PCI-PCI
uhci2@pci0:29:0:        class=3D0x0c0300 card=3D0x2800103c chip=3D0x28308=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
uhci3@pci0:29:1:        class=3D0x0c0300 card=3D0x2800103c chip=3D0x28318=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
ehci1@pci0:29:7:        class=3D0x0c0320 card=3D0x2800103c chip=3D0x28368=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D serial bus
    subclass   =3D USB
pcib2@pci0:30:0:        class=3D0x060401 card=3D0x2800103c chip=3D0x244e8=
086=20
rev=3D0xf2 hdr=3D0x01
    vendor     =3D 'Intel Corporation'
    device     =3D '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ES=
B=20
Hub Interface to PCI Bridge'
    class      =3D bridge
    subclass   =3D PCI-PCI
isab0@pci0:31:0:        class=3D0x060100 card=3D0x2800103c chip=3D0x28148=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D bridge
    subclass   =3D PCI-ISA
atapci0@pci0:31:2:      class=3D0x01018a card=3D0x2800103c chip=3D0x28208=
086=20
rev=3D0x02 hdr=3D0x00
    vendor     =3D 'Intel Corporation'
    class      =3D mass storage
    subclass   =3D ATA
re0@pci7:4:0:   class=3D0x020000 card=3D0x00241737 chip=3D0x10321737 rev=3D=
0x10=20
hdr=3D0x00
    vendor     =3D 'Linksys'
    device     =3D 'EG1032 Gigabit Ethernet'
    class      =3D network
    subclass   =3D ethernet
ohci0@pci7:9:0: class=3D0x0c0310 card=3D0x00351758 chip=3D0x00351033 rev=3D=
0x43=20
hdr=3D0x00
    vendor     =3D 'NEC Electronics Hong Kong'
    device     =3D 'uPD9210FGC-7EA / =B5PD720101 USB 1.0 Host Controller =

(OHCI compliant)'
    class      =3D serial bus
    subclass   =3D USB
ohci1@pci7:9:1: class=3D0x0c0310 card=3D0x00351758 chip=3D0x00351033 rev=3D=
0x43=20
hdr=3D0x00
    vendor     =3D 'NEC Electronics Hong Kong'
    device     =3D 'uPD9210FGC-7EA / =B5PD720101 USB 1.0 Host Controller =

(OHCI compliant)'
    class      =3D serial bus
    subclass   =3D USB
ehci2@pci7:9:2: class=3D0x0c0320 card=3D0x20011758 chip=3D0x00e01033 rev=3D=
0x04=20
hdr=3D0x00
    vendor     =3D 'NEC Electronics Hong Kong'
    device     =3D 'uPD720100A/101 USB 2.0 Enhanced Host Controller'
    class      =3D serial bus
    subclass   =3D USB

--=20

Best Wishes,
Stefan Lambrev
ICQ# 24134177





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4631CC36.8080808>