From owner-freebsd-hardware  Wed Feb 21 16:31:47 1996
Return-Path: owner-hardware
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.3/8.7.3) id QAA13879
          for hardware-outgoing; Wed, 21 Feb 1996 16:31:47 -0800 (PST)
Received: from DOGBERT.BBN.COM (DOGBERT.BBN.COM [128.89.0.182])
          by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id QAA13872
          for <freebsd-hardware@freebsd.org>; Wed, 21 Feb 1996 16:31:43 -0800 (PST)
Message-Id: <199602220031.QAA13872@freefall.freebsd.org>
Date:     Wed, 21 Feb 96 19:27:36 EST
From: Trevor Mendez <tmendez@BBN.COM>
To: freebsd-hardware@freebsd.org
cc: tmendez@BBN.COM
Subject:  Net Install with 3c589 (PCMCIA)
Sender: owner-hardware@freebsd.org
Precedence: bulk


* Attempting to load FreeBSD 2.1 over the Net onto a IBM ThinkPad using
  a 3Com EtherLink III ethernet card (3c589).

* Successfully made a boot disk with image from the ftp site.

* Everything worked except that after about 20 attempts, the device is never
  attached -- it is recognized as being in slot 1, but the probe to the I/O
  address fails, resulting in "zp0 not found at 0x300".

* I have used tried using 3com software to set the device's I/O port and INT#
  to the ones used by the kernel.  And I have set the numbers on the card and
  in the kernel (booting with "-c") to several other pairs of numbers without
  success.

Is there something else that I should try?  Thanks.`
/tdm