From owner-freebsd-isdn Tue Feb 16 04:58:52 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA15405 for freebsd-isdn-outgoing; Tue, 16 Feb 1999 04:58:52 -0800 (PST) (envelope-from owner-freebsd-isdn@FreeBSD.ORG) Received: from hcsext.hcs.de (hcsext.hcs.de [194.123.40.2]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id EAA15399 for ; Tue, 16 Feb 1999 04:58:50 -0800 (PST) (envelope-from hm@hcs.de) Received: from hcswork.hcs.de([192.76.124.5]) (2434 bytes) by hcsext.hcs.de via sendmail with P:smtp/R:inet_hosts/T:smtp (sender: ) id for ; Tue, 16 Feb 1999 13:58:48 +0100 (CET) (Smail-3.2.0.104 1998-Nov-20 #1 built 1998-Dec-11) Received: by hcswork.hcs.de (Smail3.1.29.0 #12) id m10Ck5Q-0000ZbC; Tue, 16 Feb 99 13:58 MET Message-Id: From: hm@hcs.de (Hellmuth Michaelis) Subject: Re: Elsa Quickstep 3000 In-Reply-To: <199902161202.NAA26285@ts1.schiele-ct.de> from Bernd Koecke at "Feb 16, 99 01:10:55 pm" To: bk@schiele-ct.de Date: Tue, 16 Feb 1999 13:58:48 +0100 (MET) Cc: freebsd-isdn@FreeBSD.ORG Reply-To: hm@hcs.de Organization: HCS Hanseatischer Computerservice GmbH X-Mailer: ELM [version 2.4ME+ PL39 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-isdn@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >From the keyboard of Bernd Koecke: > error-messages and finally says that there is no access to the S0-Bus. > I attached the syslog-output for detailed information. Some pieces of > the syslog-output look like the lines in the mail from Jon Lech > Johansen and his Asuscom ISDN-Card. No. Jon messages gave the L1 messages in L1 state F7 which is the activated State. Yours is: > Feb 14 14:23:05 unicorn /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal in state F4 which is the problem described in the FAQ. > ISDN-Phone, but the card didn't recognize any calls. With WinNT the > LED's on the back of the card are on after the System initialized it, > but with i4b all LED's are off. The LED's are software settable and are not serviced by i4b because this would involve too much work (for me). They don't have any meaning in i4b and are therefore off all the times. > this will help to find the error, if any. The problem may be that the > driver was originally written for a QS1000, does anybody use such a > card and can tell me wether it works? Yes, i have a QS1000 and the driver works. > May be it is necessary to change a few things in the QS1000-Driver > (more than the VendorID, it was only a quick hack). As far as i recall, there was more necessary than just another Vendor ID. hellmuth -- Hellmuth Michaelis Tel +49 40 559747-70 HCS Hanseatischer Computerservice GmbH Fax +49 40 559747-77 Oldesloer Strasse 97-99 Mail hm [at] hcs.de 22457 Hamburg WWW http://www.hcs.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message