Date: Wed, 20 Sep 2000 14:16:58 -0400 (EDT) From: Antoine Beaupre <beaupran@IRO.UMontreal.CA> To: Mark Ovens <marko@freebsd.org> Cc: freebsd-questions@freebsd.org Subject: Re: PnP modem not recognized at boot, but by pnpinfo(8) Message-ID: <Pine.LNX.4.21.0009201413540.31964-100000@phobos.IRO.UMontreal.CA> In-Reply-To: <20000920191137.A1612@parish>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a mess. I don't know exactly how I got it to work. I don't think that the PnP OS has something to do with BSd problems but then again..=20 I have to run some test before commiting myself.=20 However, I am now sure that it was not a kernel problem. (well, I did have to add the modem's PnP ID to /sys/isa/sio.c and recompile the kernel). If I setup my com2 (sio1) in the BIOS correctly, (IRQ3, 2f8), the modem is not recognized correctly. This is probably the main problem, but again, I have to test all this stuff.=20 Thanks again for you help and support A. On Wed, 20 Sep 2000, Mark Ovens wrote: > On Wed, Sep 20, 2000 at 12:36:46PM -0400, Antoine Beaupre wrote: > > On Wed, 20 Sep 2000, Mark Ovens wrote: > >=20 > > > On Tue, Sep 19, 2000 at 10:45:37AM -0400, Antoine Beaupre wrote: > > > >=20 > > > > I have `resolved` my problem in some way. The modem is recognized a= t > > > > boot. I cannot provide much details for now, since it`s not yet ful= ly > > > > functional. (see my other posting)=20 > > > >=20 > > > > I`ll just say for now that it was indeed a BIOS setting that solved= the > > > > problem. Curiously, this also busted windows support for the modem!= !! So > > > > now I can`t use my modem at all.. :( > > > >=20 > > >=20 > > > Not really surprising. If I remember correctly, once W95 has allocate= d > > > an IRQ and address for a device it forces the BIOS to update it's > > > "resources table" so that on subsequent boots it always uses the same > > > (Windows determined) IRQ. By changing the "PnP OS" setting to "no" th= e > > > BIOS is assigning resources the way it wants to. Your Windows is > > > expecting the modem to be on a particular IRQ and not finding it so i= t > > > gives up. > >=20 > > Grrr.. I hate-hate-hate-hate windows. I'll move PnP OS to NO. But now m= y > > modem is working in windows. Re-install. For about the.. say.. 20th the= se > > 2 weeks? > >=20 > > But I still have the other problem with my modem in FBSD (see my other > > post, I won't discuss it here.. :) > > =20 >=20 > Whoa, whoa. when you said before, "I`ll just say for now that it was > indeed a BIOS setting that solved the problem.", I took that to mean > that changing "PnP OS" to "n" had fixed it. Is this not the case? >=20 > Which setting works with Windows and which works with FreeBSD. > Unfortunately I can't give you a definite setting as mine works with > "PnP OS" set to either. >=20 > > > Try completely removing your modem in Windows, doing the reboot, and > > > hopefully Windows will re-find it (with "PnP OS" set to "no" in your > > > BIOS should mean that Windows won't be able to f*!=A3 it up again. > >=20 > > 'll try that thanks.=20 > >=20 > >=20 > > > >=20 > > > > > Just thought of something. Does your BIOS have a ``PnP OS'' optio= n?. > > > > > If so, what is it set to, and what happens if you change it from = "yes" > > > > > to "no" or vice versa. > > > > >=20 > > > > > The last line of your pnpinfo(8) shows that the modem is not > > > > > initialized: > > > > >=20 > > > > > -- card select # 0x0001 > > > > >=20 > > > > > CSN CIR2000 (0x0020320d), Serial Number 0xffffffff > > > > >=20 > > > > > Logical device #0 > > > > > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > > > > > IRQ 0 0 > > > > > DMA 4 4 > > > > > IO range check 0x00 activate 0x00 > > > > >=20 > > > > > Maybe you need to let the BIOS initialize the card (PnP OS =3D=3D= "n")? > > > > >=20 > > > > > > Si l'image donne l'illusion de savoir > > > > > > C'est que l'adage pretend que pour croire, > > > > > > L'important ne serait que de voir > > > > >=20 > > > > > If the image gives the illusion of knowledge(?) > > > > > It is what the ???????? for thought(?) > > > > > It is not important to know what is seen(?) > > > > >=20 > > > > > --=20 > > > > > =09=094.4 - The number of the Beastie > > > > > ________________________________________________________________ > > > > > 51.44=B0N FreeBSD - The Power To Serve http://www.freebsd.org > > > > > 2.057=B0W My Webpage http://ukug.uk.freebsd.org/~mark > > > > > mailto:marko@freebsd.org http://www.radan.com > > > > >=20 > > > >=20 > > > > Si l'image donne l'illusion de savoir > > > > C'est que l'adage pretend que pour croire, > > > > L'important ne serait que de voir > > > >=20 > > > > Lofofora > > > >=20 > > > >=20 > > > >=20 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-questions" in the body of the message > > >=20 > > > --=20 > > > =09=094.4 - The number of the Beastie > > > ________________________________________________________________ > > > 51.44=B0N FreeBSD - The Power To Serve http://www.freebsd.org > > > 2.057=B0W My Webpage http://ukug.uk.freebsd.org/~mark > > > mailto:marko@freebsd.org http://www.radan.com > > >=20 > >=20 > > Si l'image donne l'illusion de savoir > > C'est que l'adage pretend que pour croire, > > L'important ne serait que de voir > >=20 > > Lofofora > >=20 >=20 > --=20 > =09=094.4 - The number of the Beastie > ________________________________________________________________ > 51.44=B0N FreeBSD - The Power To Serve http://www.freebsd.org > 2.057=B0W My Webpage http://ukug.uk.freebsd.org/~mark > mailto:marko@freebsd.org http://www.radan.com >=20 Si l'image donne l'illusion de savoir C'est que l'adage pretend que pour croire, L'important ne serait que de voir Lofofora To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0009201413540.31964-100000>