Date: Sat, 5 Dec 2009 09:50:02 GMT From: HASHI Hiroaki <hashiz@meridiani.jp> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/140472: [ata] nForce 6 don't see my sata dvd drive [regression] Message-ID: <200912050950.nB59o2xG032626@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/140472; it has been noted by GNATS. From: HASHI Hiroaki <hashiz@meridiani.jp> To: bug-followup@FreeBSD.org, magik@roorback.net Cc: Subject: Re: kern/140472: [ata] nForce 6 don't see my sata dvd drive [regression] Date: Sat, 05 Dec 2009 18:42:51 +0900 (JST) I saw same ploblem in nForce MCP73 AHCI mode. A signature value is incorrect after softreset.(but correct after hardreset) dmesg: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-STABLE #29: Sat Dec 5 15:58:56 JST 2009 hashiz@stenmark.meridiani.jp:/usr/obj/usr/src/sys/STENMARK i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (3000.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 1811767296 (1727 MB) ACPI APIC Table: <Nvidia NVDAACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0 0/1 20090521 tbfadt-655 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard wlan: mac acl policy registered kbd1 at kbdmux0 kqemu version 0x00010400 kqemu: KQEMU installed, max_locked_mem=905932kB. acpi0: <Nvidia NVDAACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 100000, 7fdf0000 (3) failed acpi0: reservation of 0, a0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff03ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 1.0 (no driver attached) pci0: <memory, RAM> at device 1.1 (no driver attached) pci0: <memory, RAM> at device 1.2 (no driver attached) pci0: <memory, RAM> at device 1.3 (no driver attached) pci0: <memory, RAM> at device 1.4 (no driver attached) pci0: <memory, RAM> at device 1.5 (no driver attached) pci0: <memory, RAM> at device 1.6 (no driver attached) pci0: <memory, RAM> at device 2.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 3.1 (no driver attached) pci0: <memory, RAM> at device 3.2 (no driver attached) pci0: <memory, RAM> at device 3.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xeffff000-0xefffffff irq 21 at device 4.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xefffe000-0xefffe0ff irq 22 at device 4.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 atapci0: <nVidia nForce MCP73 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] hdac0: <NVidia MCP73 High Definition Audio Controller> mem 0xefff4000-0xefff7fff irq 23 at device 9.0 on pci0 hdac0: HDA Driver Revision: 20091113_0138 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 sym0: <875> port 0xce00-0xceff mem 0xefbff000-0xefbff0ff,0xefbfe000-0xefbfefff irq 18 at device 6.0 on pci1 sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking sym0: [ITHREAD] rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xefbfd000-0xefbfd0ff irq 19 at device 7.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:0a:79:f1:60:b7 rl0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111DP PCIe Gigabit Ethernet> port 0xde00-0xdeff mem 0xefdff000-0xefdfffff irq 16 at device 0.0 on pci4 re0: Using 1 MSI messages re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus1: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:e0:4d:64:0b:d5 re0: [FILTER] atapci1: <nVidia nForce MCP73 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf700-0xf70f mem 0xefff8000-0xefff9fff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci1 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect time=0ms status=00000123 ata2: ready wait time=0ms ata2: AHCI reset done: SIGNATURE=00000101 ata2: software reset port 15... ata2: ready wait time=0ms ata2: SIGNATURE: 00000001 ata2: AHCI reset done: devices=00000001 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: AHCI reset... ata3: hardware reset ... ata3: SATA connect time=0ms status=00000123 ata3: ready wait time=15ms ata3: AHCI reset done: SIGNATURE=00000101 ata3: software reset port 15... ata3: ready wait time=0ms ata3: SIGNATURE: 00000001 ata3: AHCI reset done: devices=00000001 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci1 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci1 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect time=0ms status=00000113 ata5: ready wait time=0ms ata5: AHCI reset done: SIGNATURE=eb140101 ata5: software reset port 15... ata5: ready wait time=0ms ata5: SIGNATURE: 00000001 ata5: AHCI reset done: devices=00000001 ata5: [MPSAFE] ata5: [ITHREAD] vgapci0: <VGA-compatible display> mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 21 at device 16.0 on pci0 nvidia0: <GeForce 7150 / nForce 630i> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xed000000 vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000 vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xee000000 vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58 fdc0: [FILTER] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x80 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59 uart0: [FILTER] uart0: fast interrupt uart0: debug port (9600,n,8,1) ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 60 ppc0: [MPSAFE] ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: [MPSAFE] lpt0: [ITHREAD] lpt0: Interrupt-driven port atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0xffffffff (1) kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 61a092006000920 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 61a092006000920 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd5000-0xd77ff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 117082 -> 100000 procfs registered lapic: Divisor 2, Frequency 166666931 hz Timecounter "TSC" frequency 3000004839 Hz quality -100 Timecounters tick every 1.000 msec vboxdrv: fAsync=0 offMin=0x42f offMax=0x723 Linux ELF exec handler installed lo0: bpf attached hptrr: no controller detected. Waiting 5 seconds for SCSI devices to settle ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000000 ata1: New devices: 00000000 ata2: Identifying devices: 00000001 ata2: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <nVidia> at usbus0 uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <nVidia> at usbus1 uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout uhub0: 10 ports with 10 removable, self powered fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 238475MB <Hitachi HDT725025VLA380 V5DOA7KA> at ata2-master SATA300 ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ata3: Identifying devices: 00000001 ata3: New devices: 00000001 GEOM: new disk ad0 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad1: 238475MB <Hitachi HDT725025VLA380 V5DOA7KA> at ata3-master SATA300 ad1: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000001 ata5: New devices: 00000001 unknown: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0 GEOM: new disk ad1 ata5: reiniting channel .. ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect time=0ms status=00000113 ata5: ready wait time=0ms ata5: AHCI reset done: SIGNATURE=eb140101 ata5: software reset port 15... ata5: ready wait time=0ms ata5: SIGNATURE: 00000001 ata5: AHCI reset done: devices=00000001 ata5: reinit done .. unknown: FAILURE - ATA_IDENTIFY timed out LBA=0 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout ****************************** XREA.COM -Free Web Hosting- http://www.xrea.com/ ******************************
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200912050950.nB59o2xG032626>