Date: 29 Nov 1999 19:19:24 +0100 From: Dag-Erling Smorgrav <des@flood.ping.uio.no> To: current@freebsd.org Cc: cg@freebsd.org, tanimura@freebsd.org Subject: More newpcm breakage Message-ID: <86zovx6tzn.fsf@niobe.ewox.org>
next in thread | raw e-mail | index | archive | help
--=-=-= My SB32 PnP, which had so far worked nicely with newpcm except for the "fast forward" bug, stopped working after the newmidi import. This means that none of my sound cards (except for the GUS PnP, which I haven't tested) work any more, and I am seriously losing faith in the authors' ability to maintain a device driver. I've attached the output of dmesg and pnpinfo from the affected box, both with and without the PNPBIOS option. DES -- Dag-Erling Smorgrav - des@flood.ping.uio.no --=-=-= Content-Disposition: attachment; filename=dmesg.with-pnpbios Content-Description: dmesg and pnpinfo with PNPBIOS Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #17: Wed Nov 24 20:31:13 CET 1999 root@niobe.ewox.org:/usr/src/sys/compile/NIOBE Calibrating clock(s) ... TSC clock: 166192956 Hz, i8254 clock: 1193180 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P54C (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002e5000 - 0x07ff7fff, 131149824 bytes (32019 pages) avail memory = 126554112 (123588K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f8630 bios32: Entry = 0xf8080 (c00f8080) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x80b0 pnpbios: Found PnP BIOS data at 0xc00fc730 pnpbios: Entry = f0000:c760 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc02cc000. Intel Pentium detected, installing workaround for F00F bug VESA: information block 56 45 53 41 00 02 d9 6c 00 c0 00 00 00 00 22 00 00 01 24 00 00 00 eb 6c 00 c0 eb 6c 00 c0 eb 6c 00 c0 00 01 01 01 02 01 03 01 04 01 05 01 06 01 07 01 08 01 09 01 0c 01 22 01 24 01 2a 01 1d 01 VESA: 52 mode(s) found VESA: v2.0, 2304k memory, flags:0x0, mode table:0xc027d742 (1000022) VESA: Tseng Labs ET6000 VESA: pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 173731758 bytes/sec bzero() bandwidth = 736377025 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1250, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000e800, size 4 found-> vendor=0x100c, dev=0x3208, revid=0x70 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f9000000, size 24 map[14]: type 1, range 32, base 0000e000, size 8 found-> vendor=0x8086, dev=0x1229, revid=0x02 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fa800000, size 12 map[14]: type 1, range 32, base 0000d800, size 5 map[18]: type 1, range 32, base f8800000, size 20 found-> vendor=0x9004, dev=0x8178, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base 0000d400, size 8 map[14]: type 1, range 32, base f8000000, size 12 pci0: <PCI bus> on pcib0 i4b_pci_probe: unknown PCI type 307265670l! isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: enabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: IRQ12, B: disabled, C: IRQ9, D: IRQ9 MB0: IRQ15, MB1: isa0: <ISA bus> on isab0 ata-pci0: <Intel PIIX3 IDE controller> at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0: iobase=0x01f0 altiobase=0x03f6 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1: iobase=0x0170 altiobase=0x0376 ata1: mask=00 status0=fe status1=fe i4b_pci_probe: unknown PCI type 839389196l! vga-pci0: <Tseng Labs ET6000 graphics accelerator> irq 9 at device 9.0 on pci0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 9 at device 10.0 on pci0 fxp0: Ethernet address 00:a0:c9:4d:1b:d4 bpf: fxp0 attached ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 12 at device 12.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable is present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 411 instructions downloaded pnpbios: 13 devices, largest 110 bytes PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 PNP0401: adding io range 0x778-0x77f, size=0x8, align=0 PNP0401: start dependant pnpbios: handle 0 device ID PNP0401 (0104d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 PNP0501: start dependant pnpbios: handle 1 device ID PNP0501 (0105d041) PNP0501: adding irq mask 00x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 PNP0501: start dependant pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: start dependant pnpbios: handle 3 device ID PNP0700 (0007d041) PNP0c01: adding memory range 0-0x9ffff, size=0xa0000 PNP0c01: adding memory range 0x100000-0x7ffffff, size=0x7f00000 PNP0c01: adding memory range 0xe8000-0xfffff, size=0x18000 PNP0c01: adding memory range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: start dependant pnpbios: handle 4 device ID PNP0c01 (010cd041) PNP0000: adding irq mask 00x4 PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: start dependant pnpbios: handle 5 device ID PNP0000 (0000d041) PNP0100: adding irq mask 00x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: start dependant pnpbios: handle 6 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: start dependant pnpbios: handle 7 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 00x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: start dependant pnpbios: handle 8 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 PNP0c04: start dependant pnpbios: handle 9 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1 PNP0200: start dependant pnpbios: handle 10 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 PNP0800: start dependant pnpbios: handle 11 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0a03: start dependant pnpbios: handle 12 device ID PNP0a03 (030ad041) Trying Read_Port at 203 Trying Read_Port at 243 CTL0031: start dependant CTL0031: adding irq mask 0x20 CTL0031: adding dma mask 0x2 CTL0031: adding dma mask 0x20 CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0xca0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: end dependant CTL2011: start dependant CTL2011: adding irq mask 0x400 CTL2011: adding io range 0x168-0x16f, size=0x8, align=0x1 CTL2011: adding io range 0x36e-0x36f, size=0x2, align=0x1 CTL2011: start dependant CTL2011: adding irq mask 0x800 CTL2011: adding io range 0x1e8-0x1ef, size=0x8, align=0x1 CTL2011: adding io range 0x3ee-0x3ef, size=0x2, align=0x1 CTL2011: start dependant CTL2011: adding irq mask 0x8c00 CTL2011: adding io range 0x100-0x1ff, size=0x8, align=0x8 CTL2011: adding io range 0x300-0x3ff, size=0x2, align=0x2 CTL2011: start dependant CTL2011: adding irq mask 0x8000 CTL2011: adding io range 0x170-0x177, size=0x8, align=0x1 CTL2011: adding io range 0x376-0x376, size=0x1, align=0x1 CTL2011: end dependant CTL0021: start dependant CTL0021: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0021: start dependant CTL0021: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0021: end dependant CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1 CTL0051: adding io range 0x100-0x3f8, size=0x1, align=0x8 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0 kbd0 sio0: irq maps: 0x841 0x851 0x841 0x841 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x841 0x849 0x841 0x841 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0 at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip: irq 7 plip0: <PLIP network interface> on ppbus 0 bpf: lp0 attached lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 isic0 at port 0xd80 irq 5 flags 0x3 on isa0 isic0: Teles S0/16.3 isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x960) isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x560) isa_probe_children: probing PnP devices unknown: <PNP0401> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0700> can't assign resources unknown0: <PNP0c01> at iomem 0-0x9ffff,0x100000-0x7ffffff,0xe8000-0xfffff,0xfffe0000-0xffffffff on isa0 unknown: <PNP0000> can't assign resources unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0 unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0303> can't assign resources unknown3: <PNP0c04> at port 0xf0 irq 13 on isa0 unknown4: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0 unknown: <PNP0800> can't assign resources unknown5: <PNP0a03> at port 0xcf8-0xcff,0x4d0-0x4d1 on isa0 unknown6: <Audio> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,5 on isa0 ata2: iobase=0x01e8 altiobase=0x03ee ata2: mask=00 status0=ff status1=ff unknown7: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee-0x3ef irq 11 on isa0 unknown8: <WaveTable> at port 0x620-0x623 on isa0 unknown9: <Game> at port 0x200-0x207 on isa0 unknown10: <StereoEnhance> at port 0x100 on isa0 BIOS Geometries: 0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: lo1 attached i4b: ISDN call control device attached i4bctl: ISDN system control port attached i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4btrc: 4 ISDN trace device(s) attached ata0: master: success setting up WDMA2 mode on PIIX4 chip ad0: piomode=4 dmamode=2 udmamode=2 ad0: <QUANTUM FIREBALL ST6.4A/A0F.0800> ATA-3 disk at ata0 as master ad0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, DMA Creating DISK ad0 Creating DISK wd0 Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ahc0: Selection Timeout on A:0. 1 SCBs aborted ahc0: Selection Timeout on A:1. 1 SCBs aborted ahc0: Selection Timeout on A:6. 1 SCBs aborted ahc0: Selection Timeout on A:8. 1 SCBs aborted ahc0: Selection Timeout on A:9. 1 SCBs aborted ahc0: Selection Timeout on A:10. 1 SCBs aborted ahc0: Selection Timeout on A:11. 1 SCBs aborted ahc0: Selection Timeout on A:12. 1 SCBs aborted ahc0: Selection Timeout on A:13. 1 SCBs aborted ahc0: Selection Timeout on A:14. 1 SCBs aborted ahc0: Selection Timeout on A:15. 1 SCBs aborted (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe3:ahc0:0:3:0): ILLEGAL REQUEST asc:24,0 (probe3:ahc0:0:3:0): Invalid field in CDB ahc0: target 3 synchronous at 10.0MHz, offset = 0x8 (probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:ahc0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:ahc0:0:5:0): Invalid field in CDB sks:c8,1 ahc0: target 5 synchronous at 10.0MHz, offset = 0x8 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 ahc0: target 4 synchronous at 10.0MHz, offset = 0xf Creating DISK da0 Creating DISK da1 sa0 at ahc0 bus 0 target 3 lun 0 sa0: <TECMAR TRAVAN NS8 P611> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) Creating DISK cd0 pass0 at ahc0 bus 0 target 2 lun 0 pass0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI-2 device pass0: Serial Number PCB=2011300001 ; HDA=184634612529 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 3 lun 0 pass1: <TECMAR TRAVAN NS8 P611> Removable Sequential Access SCSI-2 device pass1: 10.000MB/s transfers (10.000MHz, offset 8) pass2 at ahc0 bus 0 target 4 lun 0 pass2: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device pass2: Serial Number EX9CSTC pass2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass3 at ahc0 bus 0 target 5 lun 0 pass3: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device pass3: 10.000MB/s transfers (10.000MHz, offset 8) da0 at ahc0 bus 0 target 2 lun 0 da0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI-2 device da0: Serial Number PCB=2011300001 ; HDA=184634612529 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) da1 at ahc0 bus 0 target 4 lun 0 da1: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device da1: Serial Number EX9CSTC da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 1030MB (2110812 512 byte sectors: 255H 63S/T 131C) Mounting root from ufs:/dev/da0s1a da0s1: type 0xa5, start 0, end = 8890759, size 8890760 da0s1: C/H/S end 553/108/11 (664245) != end 8890759: invalid start_init: trying /sbin/init cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: cd present [274697 x 2048 byte records] Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0044 (0x44008c0e), Serial Number 0x000e8954 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB32 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: CTL0021 0x21008c0e #2 Device Description: WaveTable TAG Start DF Good Configuration I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4 [16-bit addr] TAG End DF Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] Logical Device ID: CTL0051 0x51008c0e #4 Device Description: StereoEnhance I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] End Tag Successfully got 79 resources, 5 logical fdevs -- card select # 0x0001 CSN CTL0044 (0x44008c0e), Serial Number 0x000e8954 Logical device #0 IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 IRQ 10 0 DMA 0 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee IRQ 11 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #2 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #4 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 --=-=-= --=-=-= Content-Disposition: attachment; filename=dmesg.without-pnpbios Content-Description: dmesg and pnpinfo without PNPBIOS Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #16: Wed Nov 24 20:24:26 CET 1999 des@niobe.ewox.org:/usr/src/sys/compile/NIOBE Calibrating clock(s) ... TSC clock: 166193094 Hz, i8254 clock: 1193182 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium/P54C (166.19-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8> real memory = 134217728 (131072K bytes) Physical memory chunk(s): 0x00001000 - 0x0009ffff, 651264 bytes (159 pages) 0x002e5000 - 0x07ff7fff, 131149824 bytes (32019 pages) avail memory = 126554112 (123588K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f8630 bios32: Entry = 0xf8080 (c00f8080) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x80b0 pnpbios: Found PnP BIOS data at 0xc00fc730 pnpbios: Entry = f0000:c760 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc02cc000. Intel Pentium detected, installing workaround for F00F bug VESA: information block 56 45 53 41 00 02 d9 6c 00 c0 00 00 00 00 22 00 00 01 24 00 00 00 eb 6c 00 c0 eb 6c 00 c0 eb 6c 00 c0 00 01 01 01 02 01 03 01 04 01 05 01 06 01 07 01 08 01 09 01 0c 01 22 01 24 01 2a 01 1d 01 VESA: 52 mode(s) found VESA: v2.0, 2304k memory, flags:0x0, mode table:0xc027d1e2 (1000022) VESA: Tseng Labs ET6000 VESA: pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) npx0: <math processor> on motherboard npx0: INT 16 interface i586_bzero() bandwidth = 173220162 bytes/sec bzero() bandwidth = 736919675 bytes/sec pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12508086) pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x1250, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000e800, size 4 found-> vendor=0x100c, dev=0x3208, revid=0x70 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base f9000000, size 24 map[14]: type 1, range 32, base 0000e000, size 8 found-> vendor=0x8086, dev=0x1229, revid=0x02 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=9 map[10]: type 1, range 32, base fa800000, size 12 map[14]: type 1, range 32, base 0000d800, size 5 map[18]: type 1, range 32, base f8800000, size 20 found-> vendor=0x9004, dev=0x8178, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 1, range 32, base 0000d400, size 8 map[14]: type 1, range 32, base f8000000, size 12 pci0: <PCI bus> on pcib0 i4b_pci_probe: unknown PCI type 307265670l! isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: enabled Coprocessor IRQ13: enabled Mouse IRQ12: disabled Interrupt Routing: A: IRQ12, B: disabled, C: IRQ9, D: IRQ9 MB0: IRQ15, MB1: isa0: <ISA bus> on isab0 ata-pci0: <Intel PIIX3 IDE controller> at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0: iobase=0x01f0 altiobase=0x03f6 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0 at 0x01f0 irq 14 on ata-pci0 ata1: iobase=0x0170 altiobase=0x0376 ata1: mask=00 status0=fe status1=fe i4b_pci_probe: unknown PCI type 839389196l! vga-pci0: <Tseng Labs ET6000 graphics accelerator> irq 9 at device 9.0 on pci0 fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 9 at device 10.0 on pci0 fxp0: Ethernet address 00:a0:c9:4d:1b:d4 bpf: fxp0 attached ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 12 at device 12.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable is present, internal 68 cable is present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 411 instructions downloaded Trying Read_Port at 203 Trying Read_Port at 243 CTL0031: start dependant CTL0031: adding irq mask 0x20 CTL0031: adding dma mask 0x2 CTL0031: adding dma mask 0x20 CTL0031: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0031: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding dma mask 0xe0 CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0031: start dependant CTL0031: adding irq mask 0x4a0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0031: start dependant CTL0031: adding irq mask 0xca0 CTL0031: adding dma mask 0xb CTL0031: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0031: end dependant CTL2011: start dependant CTL2011: adding irq mask 0x400 CTL2011: adding io range 0x168-0x16f, size=0x8, align=0x1 CTL2011: adding io range 0x36e-0x36f, size=0x2, align=0x1 CTL2011: start dependant CTL2011: adding irq mask 0x800 CTL2011: adding io range 0x1e8-0x1ef, size=0x8, align=0x1 CTL2011: adding io range 0x3ee-0x3ef, size=0x2, align=0x1 CTL2011: start dependant CTL2011: adding irq mask 0x8c00 CTL2011: adding io range 0x100-0x1ff, size=0x8, align=0x8 CTL2011: adding io range 0x300-0x3ff, size=0x2, align=0x2 CTL2011: start dependant CTL2011: adding irq mask 0x8000 CTL2011: adding io range 0x170-0x177, size=0x8, align=0x1 CTL2011: adding io range 0x376-0x376, size=0x1, align=0x1 CTL2011: end dependant CTL0021: start dependant CTL0021: adding io range 0x620-0x623, size=0x4, align=0x1 CTL0021: start dependant CTL0021: adding io range 0x620-0x683, size=0x4, align=0x20 CTL0021: end dependant CTL7001: adding io range 0x200-0x207, size=0x8, align=0x1 CTL0051: adding io range 0x100-0x3f8, size=0x1, align=0x8 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0 kbd0 sio0: irq maps: 0x841 0x851 0x841 0x841 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x841 0x849 0x841 0x841 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0 at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip: irq 7 plip0: <PLIP network interface> on ppbus 0 bpf: lp0 attached lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port ppi0: <generic parallel i/o> on ppbus 0 isic0 at port 0xd80 irq 5 flags 0x3 on isa0 isic0: Teles S0/16.3 isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x960) isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x560) isa_probe_children: probing PnP devices unknown0: <Audio> at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,5 on isa0 ata2: iobase=0x01e8 altiobase=0x03ee ata2: mask=00 status0=ff status1=ff unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee-0x3ef irq 11 on isa0 unknown2: <WaveTable> at port 0x620-0x623 on isa0 unknown3: <Game> at port 0x200-0x207 on isa0 unknown4: <StereoEnhance> at port 0x100 on isa0 BIOS Geometries: 0:0228fe3f 0..552=553 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: lo1 attached i4b: ISDN call control device attached i4bctl: ISDN system control port attached i4btel: 2 ISDN telephony interface device(s) attached i4brbch: 4 raw B channel access device(s) attached i4btrc: 4 ISDN trace device(s) attached ata0: master: success setting up WDMA2 mode on PIIX4 chip ad0: piomode=4 dmamode=2 udmamode=2 ad0: <QUANTUM FIREBALL ST6.4A/A0F.0800> ATA-3 disk at ata0 as master ad0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, DMA Creating DISK ad0 Creating DISK wd0 Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ahc0: Selection Timeout on A:0. 1 SCBs aborted ahc0: Selection Timeout on A:1. 1 SCBs aborted ahc0: Selection Timeout on A:6. 1 SCBs aborted ahc0: Selection Timeout on A:8. 1 SCBs aborted ahc0: Selection Timeout on A:9. 1 SCBs aborted ahc0: Selection Timeout on A:10. 1 SCBs aborted ahc0: Selection Timeout on A:11. 1 SCBs aborted ahc0: Selection Timeout on A:12. 1 SCBs aborted ahc0: Selection Timeout on A:13. 1 SCBs aborted ahc0: Selection Timeout on A:14. 1 SCBs aborted ahc0: Selection Timeout on A:15. 1 SCBs aborted (probe3:ahc0:0:3:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe3:ahc0:0:3:0): ILLEGAL REQUEST asc:24,0 (probe3:ahc0:0:3:0): Invalid field in CDB ahc0: target 3 synchronous at 10.0MHz, offset = 0x8 (probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:ahc0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:ahc0:0:5:0): Invalid field in CDB sks:c8,1 ahc0: target 5 synchronous at 10.0MHz, offset = 0x8 ahc0: target 2 using 16bit transfers ahc0: target 2 synchronous at 20.0MHz, offset = 0x8 ahc0: target 4 synchronous at 10.0MHz, offset = 0xf Creating DISK da0 Creating DISK da1 sa0 at ahc0 bus 0 target 3 lun 0 sa0: <TECMAR TRAVAN NS8 P611> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 8) Creating DISK cd0 pass0 at ahc0 bus 0 target 2 lun 0 pass0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI-2 device pass0: Serial Number PCB=2011300001 ; HDA=184634612529 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 3 lun 0 pass1: <TECMAR TRAVAN NS8 P611> Removable Sequential Access SCSI-2 device pass1: 10.000MB/s transfers (10.000MHz, offset 8) pass2 at ahc0 bus 0 target 4 lun 0 pass2: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device pass2: Serial Number EX9CSTC pass2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass3 at ahc0 bus 0 target 5 lun 0 pass3: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device pass3: 10.000MB/s transfers (10.000MHz, offset 8) da0 at ahc0 bus 0 target 2 lun 0 da0: <QUANTUM XP34550W LXY1> Fixed Direct Access SCSI-2 device da0: Serial Number PCB=2011300001 ; HDA=184634612529 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4341MB (8890760 512 byte sectors: 255H 63S/T 553C) da1 at ahc0 bus 0 target 4 lun 0 da1: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device da1: Serial Number EX9CSTC da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 1030MB (2110812 512 byte sectors: 255H 63S/T 131C) Mounting root from ufs:/dev/da0s1a da0s1: type 0xa5, start 0, end = 8890759, size 8890760 da0s1: C/H/S end 553/108/11 (664245) != end 8890759: invalid start_init: trying /sbin/init cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-3801TA 1047> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: cd present [274697 x 2048 byte records] Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0044 (0x44008c0e), Serial Number 0x000e8954 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB32 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: CTL0021 0x21008c0e #2 Device Description: WaveTable TAG Start DF Good Configuration I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4 [16-bit addr] TAG End DF Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] Logical Device ID: CTL0051 0x51008c0e #4 Device Description: StereoEnhance I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] End Tag Successfully got 79 resources, 5 logical fdevs -- card select # 0x0001 CSN CTL0044 (0x44008c0e), Serial Number 0x000e8954 Logical device #0 IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 IRQ 10 0 DMA 0 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee 0x03ee IRQ 11 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #2 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #4 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 --=-=-=-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86zovx6tzn.fsf>