Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Sep 2004 13:07:17 -0400 (EDT)
From:      Justin <brody@math.umd.edu>
To:        questions@FreeBSD.org
Subject:   Help with CUPS and Samsung ML-1710
Message-ID:  <200409221707.i8MH7Hur000296@aleph.none.org>

next in thread | raw e-mail | index | archive | help
Hello,
I've been trying to get my Samsung ML-1710 running under FreeBSD with
CUPS.  Installation of everything seems to have gone o.k., but I can't
print a test page.  I looked in the log file and got:

D [22/Sep/2004:12:50:55 -0400] start_process("/usr/local/libexec/cups/backend/us
b", 0xbfbf0330, 0xbfbef6a0, 12, 13, 11)
I [22/Sep/2004:12:50:55 -0400] Started backend /usr/local/libexec/cups/backend/u
sb (PID 242) for job 5.
D [22/Sep/2004:12:50:55 -0400] ProcessIPPRequest: 5 status_code=0
E [22/Sep/2004:12:50:55 -0400] PID 241 stopped with status 2!

Running /usr/local/libexec/cups/backend/usb manually gives:
	aleph# /usr/local/libexec/cups/backend/usb
	direct usb:/dev/ulpt0 "Unknown" "USB Printer #1"
	direct usb:/dev/unlpt0 "Unknown" "USB Printer #1 (no reset)"

Anyone know what this means/what I should do?

Here's everything from dmesg which may be relevant:

pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b112)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8500 VGA-compatible display device> at 0.0 irq 10
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Samsung Electronics Co., Ltd. Samsung ML-1710, rev 1.10/1.00, addr 2, iclass 7/1
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <VIA VT82C686A> port 0xd400-0xd403,0xd000-0xd003,0xcc00-0xccff irq 11 at device 7.5 on pci0
pcm0: <Avance Logic ALC200 AC97 Codec>
pci0: <VGA-compatible display device> at 8.0 irq 10
pcm1: <AudioPCI ES1373-B> port 0xdc00-0xdc3f irq 9 at device 9.0 on pci0
pcm1: <TriTech TR28023 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xe9020000-0xe90200ff irq 11 at device 11.0 on pci0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0




Printer page in the admin tool says:
 	Samsung ML-1710 Foomatic/gdi (recommended)  	
	Description: Samsung ML1710
	Location: localhost
	Printer State: idle, accepting jobs.
	Device URI: usb:/dev/ulpt0


Hopefully that's enough info.

Thanks!
-Justin Brody



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409221707.i8MH7Hur000296>