From owner-freebsd-hardware Tue Oct 27 08:03:50 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA29548 for freebsd-hardware-outgoing; Tue, 27 Oct 1998 08:03:50 -0800 (PST) (envelope-from owner-freebsd-hardware@FreeBSD.ORG) Received: from citrine.cyberstation.net (citrine.cyberstation.net [205.167.0.5]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA29543 for ; Tue, 27 Oct 1998 08:03:48 -0800 (PST) (envelope-from jumpmaster@citrine.cyberstation.net) Received: from cst.net (amethyst.cyberstation.net [205.167.0.23]) by citrine.cyberstation.net (8.9.1a/8.9.1) with ESMTP id KAA05057 for ; Tue, 27 Oct 1998 10:03:11 -0600 (CST) Message-ID: <3635EEC3.CAAAB53D@cst.net> Date: Tue, 27 Oct 1998 10:03:15 -0600 From: jumpmaster X-Mailer: Mozilla 4.05 [en] (WinNT; I) MIME-Version: 1.0 To: hardware@FreeBSD.ORG Subject: Can you help? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hardware@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Sirs, I have installed FreeBSD 2.2.7 via FTP on my system. I inserted the boot floppy and the intallation program found my network interface just fine. It is a PCI NIC built into the MB. The interface was shown as lnc1. I was able for plug in my settings and download very easily. Now when I boot from the kernel it installed on mh HD the network interface is not found. I get the message: ifconfig: interface lnc1 does not exist If I run /stand/sysinstall to try to reconfigure the network interface it does not give me the option to configure an ethernet connection. Here is dmesg -v I get when booting from the HD. Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-19981020-SNAP #0: Tue Oct 20 18:52:06 GMT 1998 root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC Calibrating clock(s) ... i8254 clock: 1193224 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: i486 DX2 Write-Back Enhanced (486-class CPU) Origin = "GenuineIntel" Id = 0x470 Stepping=0 Features=0xb real memory = 16777216 (16384K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0027b000 - 0x00ffdfff, 14168064 bytes (3459 pages) avail memory = 14282752 (13948K bytes) DPT: RAID Manager driver, Version 1.0.5 pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000 pcibus_setup(1a): mode1res=0x00000000 (0x80000000) pcibus_setup(1b): mode1res=0x80000000 (0xff000001) pcibus_check: device 0 is there (id=20000e11) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. DPT: PCI SCSI HBA Driver, version 1.4.3 pci0:0: Compaq, device=0x2000, class=old (misc) int I irq 72 [no driver assigned] map(10): mem32(0021c3f0) map(14): mem32(0021c3f0) map(18): mem32(0021c3f0) map(1c): mem32(0021c3f0) map(20): io(20000e10) vga0 rev 142 int a irq 11 on pci0:10:0 mapreg[10] type=0 addr=40000000 size=1000000. lnc1 rev 2 int a irq 11 on pci0:11:0 mapreg[10] type=1 addr=00001000 size=0020. reg16: ioaddr=0x1000 size=0x20 chip0 rev 2 on pci0:15:0 pci0: uses 16777216 bytes of memory from 40000000 upto 40ffffff. pci0: uses 32 bytes of I/O space from 1000 upto 101f. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers in BIOS for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA registers to be used for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: rows_offset:1 sc0: VGA color <16 virtual consoles, flags=0x0> ed0: disabled, not probed. fe0: disabled, not probed. sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 not found at 0x2f8 sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff mse0: disabled, not probed. psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 515MB (1056384 sectors), 1048 cyls, 16 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 bt0: disabled, not probed. uha0: disabled, not probed. aha0: disabled, not probed. aic0: disabled, not probed. nca0: disabled, not probed. nca1: disabled, not probed. sea0: disabled, not probed. wt0: disabled, not probed. mcd0: disabled, not probed. matcdc0: disabled, not probed. scd0: disabled, not probed. ie0: disabled, not probed. ep0: disabled, not probed. ex0: disabled, not probed. le0: disabled, not probed. lnc0: disabled, not probed. ze0: disabled, not probed. zp0: disabled, not probed. cs0: disabled, not probed. npx0 flags 0x1 on motherboard npx0: INT 16 interface apm0: disabled, not probed. imasks: bio c0084040, tty c0070092, net c0070092 BIOS Geometries: 0:02091f3f 0..521=522 cylinders, 0..31=32 heads, 1..63=63 sectors 0 accounted for Device configuration finished. new masks: bio c0084040, tty c0070092, net c0070092 Considering FFS root f/s. wd0s1: type 0xa5, start 0, end = 1056383, size 1056384 wd0s1: C/H/S end 65/192/63 (802493) != end 1056383: invalid To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message