Date: Sat, 22 Mar 2003 11:39:21 -0600 From: itchibahn <freebsd@isot.com> To: Len Conrad <LConrad@Go2France.com> Cc: freebsd-isp@FreeBSD.ORG Subject: Re: FBSD 5.0 and Promise FastTrak-Tx2 Message-ID: <1048354761.3e7c9fc9c542f@webmail.isot.com> In-Reply-To: <5.2.0.9.0.20030321184412.0321b008@mail.go2france.com> References: <5.2.0.9.0.20030321184412.0321b008@mail.go2france.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Turns out the technician who built this server for me used 2 standard ATA100 cables. I replaced them with the cables that came with the card, and now FBSD recognizes them as ATA100! Thanks. But still having problem, when doing the "make depend" on kernel, it reboots. Am I using right disk? I've used disk "ar0" instead of ad4 or ad6. Also noticed "Opened disk" message repeats 3 times for each disk, is that normal? Mar 22 11:27:13 radius2 kernel: 0 READY ad4: 19092MB <WDC WD200BB-00DEA0> [38792/16/63] at ata2-master UDMA100 Mar 22 11:27:13 radius2 kernel: 1 READY ad6: 19092MB <WDC WD200BB-00DEA0> [38792/16/63] at ata3-master UDMA100 Mar 22 11:27:13 radius2 kernel: Opened disk ad4 -> 16 Mar 22 11:27:13 radius2 kernel: Opened disk ad4 -> 16 Mar 22 11:27:13 radius2 kernel: Opened disk ad4 -> 16 Mar 22 11:27:13 radius2 kernel: Opened disk ad6 -> 16 Mar 22 11:27:13 radius2 kernel: Opened disk ad6 -> 16 Mar 22 11:27:13 radius2 kernel: Opened disk ad6 -> 16 Mar 22 11:27:13 radius2 kernel: Mounting root from ufs:/dev/ar0s1a Quoting Len Conrad <LConrad@Go2France.com>: > > >Mar 21 16:46:44 radius2 kernel: ad4: DMA limited to UDMA33, non-ATA66 > >cable or > >device > >Mar 21 16:46:44 radius2 kernel: ad6: DMA limited to UDMA33, non-ATA66 > >cable or > >device > > Verify that the "controller end" of the ATA133 cable is plugged into the > .... controller. :)) > > I think you can figure out where the "disk end" of the cable goes. :) > > Len > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message > ------------------------------------------------- This mail sent through ISOT. To find out more about ISOT, visit http://isot.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1048354761.3e7c9fc9c542f>