Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 28 Nov 1997 22:09:20 -0800 (PST)
From:      Doug White <dwhite@gdi.uoregon.edu>
To:        Glenn Lee Dicus <gdicus@nomadix.com>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: PC Card configuration
Message-ID:  <Pine.BSF.3.96.971128220737.22067d-100000@gdi.uoregon.edu>
In-Reply-To: <3476A9C3.21BDB770@nomadix.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 22 Nov 1997, Glenn Lee Dicus wrote:

> I am trying to install an EtherLink III 3C589C PC Card into a
> microcontroller which has a 486 CPU core.  I have FreeBSD loaded and
> running with the PAO package included as well.  However, I am trying to
> find information on configuring the driver for the card.
> 
> The problem I am having is that I cannot get ep0 enabled.  Should I
> enable it from userconfig or should the entry in pccard.conf suffice.
> Either way, however, ep0 does not seem to be able to attach to the card
> even though I boot up with the card in the socket.

> By the way, socket insertion and removal is detected by the operating
> system.

I don't understand what you mean by `enable'.  It should show as enabled
in the Boot:-c configurator; the pccardd stuff will reactivate the driver
even if the settings are wrong.

Doug White                              | University of Oregon  
Internet:  dwhite@resnet.uoregon.edu    | Residence Networking Assistant
http://gladstone.uoregon.edu/~dwhite    | Computer Science Major





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971128220737.22067d-100000>