Date: Mon, 24 Apr 2000 15:37:17 -0500 From: "Jonathan E. Lyons" <parrothd@midwest.net> To: Otter <otter@otter.cc>, "Christopher T. Griffiths" <cgriffiths@quansoo.com> Cc: FreeBSD Questions List <freebsd-questions@FreeBSD.ORG> Subject: Re: IBM Thinkpad 600e and Sound Message-ID: <3.0.5.32.20000424153717.0139e410@midwest.net> In-Reply-To: <39199EEB.5EE5F110@otter.cc> References: <Pine.BSF.4.21.0005101318190.1846-100000@defiant.quansoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Here's what I had in my 4.0 (at least I think it was 4.0) :) device pcm0 at isa? port 0x52C irq 5 drq 1 flags 0x10 At 01:39 PM 5/10/00 -0400, Otter wrote: >Chris, >Aside from using pcm, you might want to also use another driver (like >sba), specifying port, dma, similar to what i did with my old SB16. Or >try it with the specs on pcm. > > device pcm0 at isa? port? irq 5 drq 1 flags 0x15 > >YMMV. I'd recommend reading the man page for csa, though. You might >need a pcm/csa combo for it to work properly. >-Otter > > > >"Christopher T. Griffiths" wrote: >> >> Hello, >> >> I am currently running 4.0 -stable on a Thinkpad 600e. I have the >> following set in my kernel: >> >> device pcm >> options PNPBIOS >> >> Unfortunatly I am not getting any sound and am getting the following >> dmesg: >> >> csa0: <Crystal Semiconductor CS4610/4611 Audio accelerator> mem >> 0x50000000-0x500 >> fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 >> pcm0: <CS461x PCM Audio> on csa0 >> pcm0: ac97 codec reports dac not ready >> >> and >> >> unknown: <PNP0000> can't assign resources >> unknown0: <PNP0200> at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0 >> unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0 >> unknown2: <PNP0b00> at port 0x70-0x73 irq 8 on isa0 >> unknown3: <PNP0800> at port 0x61 on isa0 >> unknown: <PNP0303> can't assign resources >> unknown: <IBM3780> can't assign resources >> unknown4: <PNP0c04> at port 0xf0-0xff irq 13 on isa0 >> unknown: <PNP0700> can't assign resources >> unknown5: <PNP0a03> at port 0xcf8-0xcff on isa0 >> unknown6: <PNP0c02> at port >> 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x1 >> 5ef,0xef00-0xefaf iomem >> 0-0x9ffff,0xf0000-0xfffff,0x100000-0x11ffffff,0xffff0000 >> -0xffffffff on isa0 >> unknown7: <PNP0400> at port 0x3bc-0x3bf irq 7 on isa0 >> unknown: <PNP0501> can't assign resources >> pcm1: <CS423x-PCI> at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq >> 1,0 on >> isa0 >> unknown8: <CSC0110> at port 0x538-0x53f on isa0 >> unknown9: <CSC0101> at port 0x200-0x207 on isa0 >> unknown: <CSC0103> can't assign resources >> unknown10: <IBM3765> at port 0x130-0x13f,0x2f8-0x2ff irq 3,10 drq 7 on >> isa0 >> unknown: <IBM0071> can't assign resources >> unknown: <PNP0e03> can't assign resources >> unknown: <PNP0680> can't assign resources >> unknown: <PNP0680> can't assign resources >> unknown11: <PNP0c02> on isa0 >> >> I have looked through the archives with various solutions but none seem to >> help. Any suggestions would be great. >> >> Thanks >> >> Chris >> >> --- >> Christopher T. Griffiths >> Quansoo Group Inc. >> cgriffiths@quansoo.com >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Jonathan E. Lyons Nucleus Consulting parrothd@midwest.net www.nucleusconsulting.com ICQ # 14226912 A+, MCSE, CCNA, FreeBSD! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.20000424153717.0139e410>