Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Jun 2005 01:44:28 -0700
From:      "D. Goss" <lists@dylangoss.com>
To:        FreeBSD questions <freebsd-questions@freebsd.org>
Subject:   Re: odd disk activity - solved
Message-ID:  <E66F8E10-A2A0-454D-9613-B795AACD72A0@dylangoss.com>
In-Reply-To: <B55155E4-913A-463E-AC41-E0D868AC5BBD@dylangoss.com>
References:  <D9E7C253-7FD4-4A67-9839-B883E503B54D@dylangoss.com> <b34be84205061421375fd86a2f@mail.gmail.com> <B55155E4-913A-463E-AC41-E0D868AC5BBD@dylangoss.com>

next in thread | previous in thread | raw e-mail | index | archive | help

On Jun 14, 2005, at 11:35 PM, D. Goss wrote:

>
> On Jun 14, 2005, at 9:37 PM, Juha Saarinen wrote:
>
>
>> On 6/15/05, D. Goss <lists@dylangoss.com> wrote:
>>
>>
>>> I've got a bit of a general question - sorry if this is vague.
>>>
>>> I recently ran some memory tests that were posted in the list  
>>> earlier
>>> - they are bootable CD images.  Each one hung in it's standard
>>> configuration and I put them aside until later to look into in more
>>> detail.  In the meantime I've noticed that one of my hard drives can
>>> not be found on the SCSI bus...
>>>
>>> Normally with this test server the drives are as follows:
>>>
>>> da0s1 = 18GB U160 as boot volume with system and all data
>>> da1s1 = 36GB U320 emtpy
>>> da2s1 = 36GB U320 emtpy
>>> da3s1 = 36GB U320 emtpy
>>> da4s1 = 36GB U320 emtpy
>>>
>>> The four test drives have been mountable (up until now) -
>>>
>>> mount /dev/da1s1 /mnt/misc1
>>> mount /dev/da2s1 /mnt/misc2
>>> etc...
>>>
>>> but now I'm getting
>>> # mount /dev/da4d1 /mnt/misc4
>>> mount: /dev/da4d1: No such file or directory
>>>
>>>
>>
>>
>> Did you mean to type:
>>
>> # mount /dev/da4s1 /mnt/misc4
>>
>> instead?
>>
>
> also...
>
> # camcontrol inquiry da1
> pass1: <IBM-ESXS ST336753LC    FN B855> Fixed Direct Access SCSI-3  
> device
> pass1: Serial Number 3HX07J9W000073XXXXXX
> pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged  
> Queueing Enabled
> # camcontrol inquiry da2
> pass2: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
> pass2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit),  
> Tagged Queueing Enabled
> # camcontrol inquiry da3
> pass3: <IBM-ESXS MAS3367NC     FN C901> Fixed Direct Access SCSI-3  
> device
> pass3: Serial Number A0F9P4XXXXXX
> pass3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit),  
> Tagged Queueing Enabled
> # camcontrol inquiry da4
> camcontrol: cam_lookup_pass: CAMGETPASSTHRU ioctl failed
> cam_lookup_pass: No such file or directory
> cam_lookup_pass: either the pass driver isn't in your kernel
> cam_lookup_pass: or da4 doesn't exist
>
>
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions- 
> unsubscribe@freebsd.org"
>

This was indeed something at the BIOS - the disk setup utility showed  
that the drive on slot 4 was set to be a mirror of slot 3.  I haven't  
been in this menu and the setup worked before - not sure if memory  
test could have corrupted this setting, seems odd but timing was same.

Anyway, thanks.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E66F8E10-A2A0-454D-9613-B795AACD72A0>