Date: Mon, 03 Mar 1997 15:27:28 +0200 From: Ricardo Williams <rpw@iafrica.com> To: freebsd-questions@freebsd.org Subject: Custom kernel not compiling Message-ID: <3.0.32.19970303152627.006cb778@ctpop01.iafrica.com>
next in thread | raw e-mail | index | archive | help
I have FreeBSD 2.1.5 from the August 1996 CD release. It is installed on a Conner 210Mb (CFS210A) hard drive. My system hardware is as follows : Intel Pentium 100 CPU 32Mb FP RAM 1.44Mb floppy drive Acer 12x ATAPI CD ROM drive (CD-912E / ATK) SoundBlaster 16 PnP (Hardware Rev. 4.1.3 (?) ) Accton 1650 16bit network card (UTP, AUTP & BNC interfaces) Rockwell based 28800 modem (Rockwell RC288DPi chipset) S3 ViRGE based video card (2Mb video ram) No SCSI or EISA devices at all I have written from scratch a custom kernel config file using the LINT config file as a guide. I basically only wanted to enable support for the above configuration. The config file passes the "/usr/sbin/config ?????" stage but "make depend" fails with "Syntax error: "(" unexpected. Attached please find the kernel config file, ricardow_kernel_config.txt, as well as the output of the "make depend" command in the make_depend_output.txt file. What is wrong and what can I do to fix it ? I though that since I had no eisa or scsi devices, I would not enable support for any of them, and also since there is no native support for my Accton 1650 network card, I disabled all other network card probes and only enabled the "device ed0" probing for a NE1/2000 network cards. I have also attached my current kernel's config file which is derived from the GENERIC one with only support for APM and my SoundBlaster added, I think . :+> Thanks in advance. Ricardo Williams Email: rpw@iafrica.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19970303152627.006cb778>