Date: Tue, 15 Jun 1999 02:05:56 +0800 (SGT) From: Alvin Jiang <alvin@ajiang.com> To: alvin@singnet.com.sg Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) Message-ID: <199906141805.CAA23638@utopia.ajiang.com>
next in thread | raw e-mail | index | archive | help
At Tue, 15 Jun 1999 01:43:15 +0800 (SGT), you wrote: >At Mon, 14 Jun 1999 10:12:12 -0700 (PDT), you wrote: >>Unless Win98 is a lot stupider than I think, I'll have a disk that >>will add the IDE CD-ROM on the e-machines, but won't add either of the >>SCSI CD-ROM's on the FreeBSD box with the CDRW on it. >> >> Thanx, >> <mike >> >> >> >>On Mon, 14 Jun 1999, Kent Stewart wrote: >> >>> Date: Mon, 14 Jun 1999 09:57:38 -0700 >>> From: Kent Stewart <kstewart@3-cities.com> >>> To: Mike Meyer <mwm@phone.net> >>> Cc: freebsd-stable@freebsd.org >>> Subject: Re: Yamaha CD-R[W] drives (Re: Is the CD driver) >>> >>> Choose > Start > settings > control panel > add/remove progs > startup >>> disk. When you finish creating a startup disk you have a Win98 DOS boot >>> that will add your CDROM. You need one of these disks around for your >>> e-machine anyway. >>> >>> Kent >>> >>> Mike Meyer wrote: >>> > >>> > Ok, so where do I find a DOS bootable floppy? The only MS box in the >>> > house is the children's e-machine, running Windows 98... >>> > >>> > <mike >>> > >>> > On Mon, 14 Jun 1999, Peter Radcliffe wrote: >>> > >>> > > Date: Mon, 14 Jun 1999 11:16:55 -0400 >>> > > From: Peter Radcliffe <pir@pir.net> >>> > > To: freebsd-stable@FreeBSD.ORG >>> > > Subject: Yamaha CD-R[W] drives (Re: Is the CD driver) >>> > > >>> > > Stephen Krzywicki <sek@superiorcam.com> probably said: >>> > > > The latest firmware release from Yamaha may fix this problem. >>> > > >>> > > Speaking of firmware upgrades: >>> > > >>> > > http://www.yamahayst.com/techsup/flasrom.htm >>> > > ] For Windows NT and/or UNIX-SGI Users: >>> > > ] If you are operating under Windows NT or UNIX type environments, you >>> > > ] must use the DOS Batch utility to upgrade the Yamaha Recorder. Boot >>> > > ] from a DOS bootable Floppy, configured as shown below for your SCSI >>> > > ] Card and then run the DOS batch upgrade utility. Otherwise, you must >>> > > ] take our drive to a DOS, Windows 95, or Macintosh environment to >>> > > ] upgrade our unit. >>> > > >>> > > http://www.yamahayst.com/techsup/cdr400fi.htm >>> > > ] For Models (CDR400c, CDR400cx, CDR400t, CDR400tx, CDR400AT) >>> > > ] Version NO.: 1.0q Inquiry Date: Nov. 11, '98 >>> > > ] 1) Making the same firmware file usable for CDR's and CRW's. >>> > > ] 2) Extended support for silver media. >>> > > ] 3) Reducing the noise problem for reading CD-DA discs. >>> > > >>> > > Note the extended support for silver (cheepo) media. >>> > > (similar comments in the CRW4260 section) >>> > > >>> > > If you're using a Yamaha CD-R[W], upgrade your firmware tp 1.0q >>> > > >>> > > P. >>> > > >>> > > -- >>> > > pir pir@pir.net pir@shore.net pir@net.tufts.edu >>> > > >>> > > >>> > > >>> > > To Unsubscribe: send mail to majordomo@FreeBSD.org >>> > > with "unsubscribe freebsd-stable" in the body of the message >>> > > >>> > >>> > To Unsubscribe: send mail to majordomo@FreeBSD.org >>> > with "unsubscribe freebsd-stable" in the body of the message >>> >>> -- >>> Kent Stewart >>> Richland, WA >>> >>> mailto:kstewart@3-cities.com >>> http://www.3-cities.com/~kstewart/index.html >>> >>> >>> To Unsubscribe: send mail to majordomo@FreeBSD.org >>> with "unsubscribe freebsd-stable" in the body of the message >>> >> >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-stable" in the body of the message >> >-=[Zeus]=- > -=[Zeus]=- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199906141805.CAA23638>