Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 28 Oct 2018 23:02:12 +0100
From:      Michael Tuexen <tuexen@freebsd.org>
To:        FreeBSD PowerPC ML <freebsd-ppc@freebsd.org>
Subject:   G5 fans
Message-ID:  <3216213D-F6C7-403F-B698-3E06CB61ABBF@freebsd.org>

next in thread | raw e-mail | index | archive | help
Dear all,

if you have access to a G5 Powermac, could you provide the output of the
following command from the OpenFirmware prompt:

dev u3/i2c/fan
" .status" " u3/i2c/fan" open-dev $call-method=20

On a PowerMac7,3 having liquid cooling have access to, I get:

0 > dev u3/i2c/fan  ok
0 > " .status" " u3/i2c/fan" open-dev $call-method=20

                  FCU Version: 6.0.1f0

        Failed RPM Channel(s): 0=20
     Available RPM Channel(s): 0 1 2 3 4 5 6=20
        Active RPM Channel(s): 1 2 3 4 5 6=20

        Failed PWM Channel(s): None
     Available PWM Channel(s): 1 2=20
        Active PWM Channel(s): 1 2=20

Processor A  Intake Fan (RPM3): 1449 RPM
Processor A Exhaust Fan (RPM4): 1497 RPM
Processor B  Intake Fan (RPM5): 1452 RPM
Processor B Exhaust Fan (RPM6): 1501 RPM
           U3 Zone Fan (PWM1): 1878 RPM
          PCI Zone Fan (PWM2): 1830 RPM
         Drive Bay Fan (RPM2): 1498 RPM
ok

I'm interested in the RPM channels which are reported as =
Failed/Available/Active.
Please provide also some information what kind of PowerMac G5 it is.

Thanks for your help.

Best regards
Michael=



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3216213D-F6C7-403F-B698-3E06CB61ABBF>