Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 31 Jul 2001 21:57:01 -0400
From:      "Normand Leclerc" <leclercn@videotron.ca>
To:        <freebsd-alpha@freebsd.org>
Subject:   RE: Serial console gettytab
Message-ID:  <000001c11a2d$41d91200$1638a8c0@phobos>
In-Reply-To: <20010731150738.A76404@dragon.nuxi.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
Then ...  what's wrong with my setup?  Do you have a 164sx with a serial
console from which you can log on?  I mean, messages from kernel looks
fine, messages from userland is messed.

If it can help, I am attaching part of the boot-up screen I get from the
serial console.  You'll see what I mean...

Normand Leclerc
leclercn@videotron.ca


-----Original Message-----
From: David O'Brien [mailto:dev-null@NUXI.com] 
Sent: Tuesday, July 31, 2001 6:08 PM
To: leclercn@videotron.ca
Cc: freebsd-alpha@freebsd.org
Subject: Re: Serial console gettytab

On Mon, Jul 30, 2001 at 04:13:58PM -0400, Normand Leclerc wrote:
> I know my cable has CTS/RTS hooked right as the SRM is doing fine (and


Having CTS/RTS does not mater -- I run all my Alpha's with only RX, TX,
and GND.


------------


sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0
sio1: type ST16650A
sio1: interrupting at ISA irq 3
ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found 
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppc0: interrupting at ISA irq 7
ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0
ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
lpt1: <Printer> on ppbus1
lpt1: Polled port
ppc1: interrupting at ISA irq 5
Timecounter "alpha"  frequency 533170336 Hz
Waiting 8 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <HP HP35480A T603> Removable Sequential Access SCSI-2 device 
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
da2 at isp0 bus 0 target 2 lun 0da2: <SEAGATE ST19101N 0011> Fixed
Direct Access SCSI-2 device 
da2: 20.000MB/s transfers (20.000MHz, offset 8), Tagged Queueing Enabled
da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da0 at isp0 bus 0 target 0 lun 0
da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device 
da0: 20.000MB/s transfers (20.000MHz, offset 8), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da1 at isp0 bus 0 target 1 lun 0
da1: <SEAGATE ST32550N 0016> Fixed Direct Access SCSI-2 device 
da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da1: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C)
Mounting root from ufs:/dev/da1a
cd1 at isp0 bus 0 target 6 lun 0
cd1: <NEC CD-ROM DRIVE:222 3.0i> Removable CD-ROM SCSI-2 device 
cd1: 7.575MB/s transfers (7.575MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
(cd2:isp0:0:15:0): got CAM status 0x4a
(cd2:isp0:0:15:0): fatal error, failed to attach to device
(cd2:isp0:0:15:0): lost device
(cd2:isp0:0:15:0): removing device entry
ccd0-3: Concatenated disk drivers
vinum: loaded
vinum: reading configuration from /dev/da2f
vinum: updating configuration from /dev/da0g
vinum: /dev is m, not rebuildingswapon: adding / device
Automatic boot i/dev/da1a: FILESYSTEM CLEANS
/dev/da1a: clean, 56324 fre90 blocks, 0.4% /dev/vinum/home:N; SKIPPING
CHECome: clean, 2393rags, 298864 blontation)
/dev/da1e: FILESYSTEM CLEANS
/dev/da1e: cl(268 frags, 1189ragmentation)
/STEM CLEAN; SKIPv/da2g: clean, 38 frags, 478733 gmentation)
/deTEM CLEAN; SKIPP/ccd0c: clean, 7rags, 99182 bloctation)
/dev/daLEAN; SKIPPING C: clean, 681307 s, 83108 blocks,ion)
/dev/da0f:N; SKIPPING CHEClean, 267486 fre403 blocks, 0.0%
Doing initial ne hostname domain.
ifconfig: ioctl (SIOCAIFAD: File exists
ifconfig: ioctl (SIOCAIFAD: File exists
ifconfig: ioctl (SIOCAIFAD
ifconfig: ioctl (SIOCAIFAD
ifconfig: ioctl ile exists
ifconfig: ioctl ile exists
ifconfig: ioctl ile exists
xl0: flags=8843<NING,SIMPLEX,MUL
	inet 192.168.ffffff80 broadca7
	inet6 fe80::c%xl0 prefixlen peid 0x1 
	inetetmask 0xffffff8168.56.127
	inenetmask 0xffffff.168.56.127
	in netmask 0xfffff2.168.56.127
	i4 netmask 0xffff92.168.56.127
	35 netmask 0xfff192.168.56.127
.36 netmask 0xff 192.168.56.127
6.37 netmask 0xft 192.168.56.1274:75:94:0c 
	me(100baseTX) statported media: auTX <full-duplex>eT/UTP
<full-dup 100baseTX <hw-llags=8049<UP,LOOLTICAST> mtu 163:1%lo0
prefixlen
	inet6 ::1 preet 127.0.0.1 net
add net defaul68.56.126
Addittions: TCP keepang daemons:.
Do setup:add net :ateway ::1
add ateway ::1
net.ding: 0 -> 0
nept_rtadv: 0 -> 0accept_rtadv: 0 add net fe80::: add net ff02:::
0:4ff:fe75:940c%ND default inter IPv4 mapped IPvt=YES.
Additional daemo syslogd.



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?000001c11a2d$41d91200$1638a8c0>