Date: Fri, 12 Sep 2003 22:48:01 +0200 From: Andreas Klemm <andreas@freebsd.org> To: current@freebsd.org Subject: PCMCIA: 3COM 3CCFE575BT should be supported but actually doesn't work Message-ID: <20030912204801.GA1919@titan.klemm.apsfilter.org>
next in thread | raw e-mail | index | archive | help
Hi, my new PCMCIA card just arrived from eBay, since my Xircom didn't run properly under current. The FreeBSD Laptop Support page stated out, that somebody got this 3COM card to work under -current. I tried now two -current snaps from: - 2003-08-24 - 2003-09-08 In both snaps the card is recognized on boot. but cardbus can't be activated. In -current from 2003-09-08 boot messages: cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 11 INTA is routed to irq 11 cbb0: [MPSAFE] cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 11 INTB is routed to irq 11 cbb1: [MPSAFE] [...] pccard0: Allocation failed for cfe 0 [...] cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1 xl0: reset didn't complete xl0: command never completed! xl0: command never completed! xl0: eeprom failed to come ready xl0: failed to read station address device_probe_and_attach: xl0 attach returned 6 cbb1: CardBus card activation failed [...] I tried the 3COM Card in the PCMCIA Slot cbb0 as well on my Toshiba Satellite PRO 4360. No difference. Any idea how to fix this ? Andreas /// -- Andreas Klemm - Powered by FreeBSD 5.1-CURRENT Need a magic printfilter today ? -> http://www.apsfilter.org/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030912204801.GA1919>