Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 30 Aug 1999 20:49:37 -0500
From:      Dick Arnold <darnold@fgi.net>
To:        questions@FreeBSD.ORG
Subject:   Re: old Soundblaster 16
Message-ID:  <99083021274701.00784@darnold.fgi.net>
References:  <99083017540200.00273@Orion>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 30 Aug 1999, avenger wrote:
> if anyone has a sb16 i need your help! my sb16 is the older non PNP card
> 
> i have an old Soundblaster 16 circa 1992. In my kernel now i have 
> 
> controller snd0
> device sb0 at isa? port 0x220 irq 5 drq 1
> device opl0 at isa? port 0x300
> 
> ive already tried 
> device sbmidi0 at isa? port 0x300
> 
> (my midi is on 300H just because thats where ive had it, although yes ive
> already tried 330H which is the factory default)
> 
> ive also tried 
> device opl0 at isa? port 0x388
> 
> When i boot, it sees the sb0 yes warns me i need to use SB Pro Support (?!?)
> also, it cant find any of the supported midi devices.
> 
> i did /dev/MAKEDEV snd0
> and i cant get any sound... If anyone can help me i really need it, im getting
> frustrated with this sound card.
> 
> Thank you very much for your time, 
> 
> Dan Brodie
> arch@ecis.com
> 
I have the same card and it looks like your missing the 16 bit sound
entry.

device sbxvi0	at isa ? drq 6

I use dma 6 but I think the default is 1.

at boot:

sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.5> 
sbxvi0 at drq 6 on isa
snd0: <SoundBlaster 16 4.5> 
sbmidi0 at 0x300 on isa
snd0: <SoundBlaster MPU-401> 
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>

You'll have to do a kernel config, depend, etc.

Dick Arnold



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?99083021274701.00784>