Date: Thu, 12 Oct 2000 11:28:38 +0200 From: "wissmann" <wissmann@lan-ks.de> To: <freebsd-Questions@FreeBSD.org> Subject: Kernel make fails add-on Message-ID: <001b01c0342e$e45cc980$ecc4fea9@wissmann>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0018_01C0343F.90C09CA0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello again! Here is as a complement my kernel configuration file Greetings Frank Wissmann ------=_NextPart_000_0018_01C0343F.90C09CA0 Content-Type: application/octet-stream; name="Darksky" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Darksky" machine i386=0A= ident DARKSKY=0A= cpu I686_CPU=0A= maxusers 32=0A= =0A= makeoptions DEBUG=3D-g #Build kernel with gdb(1) debug symbols=0A= =0A= makeoptions KERNEL=3DDARKSKY =0A= =0A= options MAXDSIZ=3D"(512*1024*1024)"=0A= options DFLDSIZ=3D"(256*1024*1024)"=0A= =0A= options BLKDEV_IOSIZE=3D8192=0A= =0A= options INCLUDE_CONFIG_FILE=0A= options ROOTDEVNAME=3D\"ufs:da1s1a"=0A= =0A= options INET #InterNETworking=0A= options INET6 #IPv6 communications protocols=0A= options IPSEC=0A= options IPSEC_ESP=0A= options IPSEC_DEBUG=0A= =0A= pseudo-device fddi=0A= pseudo-device sppp=0A= pseudo-device stf 1=0A= pseudo-device disc=0A= options PPP_BSDCOMP=0A= options PPP_FILTER=0A= =0A= options IPFIREWALL=0A= options IPFIREWALL_VERBOSE=0A= options IPFIREWALL_FORWARD=0A= options IPV6FIREWALL=0A= options IPV6FIREWALL_VERBOSE=0A= options IPFILTER=0A= options IPFILTER_LOG=0A= options IPSTEALTH=0A= options TCPDEBUG=0A= options DUMMYNET=0A= options BRIDGE=0A= =0A= options FFS #Berkeley Fast Filesystem=0A= options FFS_ROOT #FFS usable as root device [keep this!]=0A= options SOFTUPDATES #Enable FFS soft updates support=0A= options MFS #Memory Filesystem=0A= options MD_ROOT #MD is a potential root device=0A= options NFS #Network Filesystem=0A= options MSDOSFS #MSDOS Filesystem=0A= options CD9660 #ISO 9660 Filesystem=0A= options CD9660_ROOT #CD-ROM usable as root, CD9660 required=0A= options PROCFS #Process filesystem=0A= options KERNFS=0A= options FDESC=0A= options UNION=0A= options MD_ROOT_SIZE=3D32=0A= options QUOTA=0A= options EXT2FS=0A= =0A= options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]=0A= =0A= options USER_LDT=0A= =0A= options SCSI_DELAY=3D5000 #Delay (in ms) before probing SCSI=0A= options UCONSOLE #Allow users to grab the console=0A= options USERCONFIG #boot -c editor=0A= options VISUAL_USERCONFIG #visual boot -c editor=0A= options KTRACE #ktrace(1) support=0A= options SYSVSHM #SYSV-style shared memory=0A= options SYSVMSG #SYSV-style message queues=0A= options SYSVSEM #SYSV-style semaphores=0A= options P1003_1B #Posix P1003_1B real-time extensions=0A= options _KPOSIX_PRIORITY_SCHEDULING=0A= options ICMP_BANDLIM #Rate limit bad replies=0A= options KBD_INSTALL_CDEV # install a CDEV entry in /dev=0A= =0A= options DDB=0A= options DDB_UNATTENDED=0A= =0A= options GDB_REMOTE_CHAT=0A= =0A= options INVARIANTS=0A= options INVARIANT_SUPPORT=0A= =0A= options DIAGNOSTIC=0A= =0A= options PERFMON=0A= =0A= options COMPILING_LINT=0A= =0A= device isa=0A= device oltr0=0A= device pci=0A= =0A= # ATA and ATAPI devices=0A= device ata=0A= device atadisk # ATA disk drives=0A= device atapifd # ATAPI floppy drives=0A= #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices=0A= =0A= # SCSI Controllers=0A= device sym # NCR/Symbios Logic (newer chipsets)=0A= =0A= # SCSI peripherals=0A= device scbus # SCSI bus (required)=0A= device da # Direct Access (disks)=0A= device sa # Sequential Access (tape etc)=0A= device cd # CD=0A= device pass # Passthrough device (direct SCSI access)=0A= =0A= # atkbdc0 controls both the keyboard and the PS/2 mouse=0A= device atkbdc0 at isa? port IO_KBD=0A= device psm0 at atkbdc? irq 12=0A= =0A= device vga0 at isa?=0A= =0A= # splash screen/screen saver=0A= pseudo-device splash=0A= =0A= # syscons is the default console driver, resembling an SCO console=0A= device sc0 at isa? flags 0x100=0A= options MAXCONS=3D16=0A= options SC_ALT_MOUSE_IMAGE=0A= options SC_HISTORY_SIZE=3D200=0A= =0A= # Floating point support - do not disable.=0A= device npx0 at nexus? port IO_NPX irq 13=0A= =0A= # Power management support (see LINT for more options)=0A= device apm0 at nexus? disable flags 0x20 # Advanced Power Management=0A= =0A= # Serial (COM) ports=0A= device sio0 at isa? port IO_COM1 flags 0x10 irq 4=0A= device sio1 at isa? port IO_COM2 irq 3=0A= =0A= # Parallel port=0A= device ppc0 at isa? irq 7=0A= device ppbus # Parallel port bus (required)=0A= device lpt # Printer=0A= device plip # TCP/IP over parallel=0A= device ppi # Parallel port interface device=0A= device vpo # Requires scbus and da=0A= =0A= # PCI Ethernet NICs that use the common MII bus controller code.=0A= device miibus # MII bus support=0A= device rl # RealTek 8129/8139=0A= =0A= # ISA Ethernet NICs.=0A= device ed0 at isa? port 0x280 irq 10 iomem 0xd8000=0A= device ex=0A= device ep=0A= =0A= # The probe order of these is presently determined by = i386/isa/isa_compat.c.=0A= device ie0 at isa? port 0x300 irq 10 iomem 0xd0000=0A= device fe0 at isa? port 0x300=0A= device le0 at isa? port 0x300 irq 5 iomem 0xd0000=0A= device lnc0 at isa? port 0x280 irq 10 drq 0=0A= device cs0 at isa? port 0x300=0A= device sn0 at isa? port 0x300 irq 10=0A= =0A= # Pseudo devices - the number indicates how many units to allocated.=0A= pseudo-device loop # Network loopback=0A= pseudo-device ether # Ethernet support=0A= pseudo-device ppp 1 # Kernel PPP=0A= pseudo-device tun # Packet tunnel.=0A= pseudo-device pty # Pseudo-ttys (telnet etc)=0A= pseudo-device md # Memory "disks"=0A= pseudo-device gif 4 # IPv6 and IPv4 tunneling=0A= pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)=0A= =0A= # The `bpf' pseudo-device enables the Berkeley Packet Filter.=0A= # Be aware of the administrative consequences of enabling this!=0A= pseudo-device bpf #Berkeley packet filter=0A= =0A= device snd=0A= device sb0 at isa? port 0x220 irq 5 drq 1=0A= device uart0 at isa? port 0x330 irq 5=0A= =0A= device bktr=0A= device smbus=0A= device iicbus=0A= device iicbb=0A= options BROOKTREE_SYSTEM_DEFAULT=3DBROOKTREE_PAL=0A= =0A= device smb=0A= =0A= device joy0 at isa? port IO_GAME=0A= =0A= options AVM_A1_PCI=0A= device isic=0A= pseudo-device "i4bctl"=0A= pseudo-device "i4brbch" 4=0A= pseudo-device "i4bisppp" 4=0A= =0A= options COMPAT_SVR4=0A= options DEBUG_SVR4=0A= pseudo-device streams=0A= =0A= # USB support=0A= device uhci # UHCI PCI->USB interface=0A= device ohci # OHCI PCI->USB interface=0A= device usb # USB Bus (required)=0A= device ugen # Generic=0A= device uhid # "Human Interface Devices"=0A= device ukbd # Keyboard=0A= device ulpt # Printer=0A= device umass # Disks/Mass storage - Requires scbus and da=0A= device ums # Mouse=0A= ------=_NextPart_000_0018_01C0343F.90C09CA0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001b01c0342e$e45cc980$ecc4fea9>