Date: Fri, 22 Apr 2011 09:39:05 +0000 (UTC) From: Marius Strobl <marius@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r220940 - head/sys/dev/hme Message-ID: <201104220939.p3M9d5ON035694@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marius Date: Fri Apr 22 09:39:05 2011 New Revision: 220940 URL: http://svn.freebsd.org/changeset/base/220940 Log: Correct spelling in comments. Submitted by: brucec Modified: head/sys/dev/hme/if_hme.c head/sys/dev/hme/if_hmereg.h Modified: head/sys/dev/hme/if_hme.c ============================================================================== --- head/sys/dev/hme/if_hme.c Fri Apr 22 09:31:40 2011 (r220939) +++ head/sys/dev/hme/if_hme.c Fri Apr 22 09:39:05 2011 (r220940) @@ -203,7 +203,7 @@ hme_config(struct hme_softc *sc) * the DMA bus tag: * sc_dmatag * - * the bus handles, tags and offsets (splitted for SBus compatability): + * the bus handles, tags and offsets (splitted for SBus compatibility): * sc_seb{t,h,o} (Shared Ethernet Block registers) * sc_erx{t,h,o} (Receiver Unit registers) * sc_etx{t,h,o} (Transmitter Unit registers) @@ -1559,7 +1559,7 @@ hme_mediachange_locked(struct hme_softc * If both PHYs are present reset them. This is required for * unisolating the previously isolated PHY when switching PHYs. * As the above hme_mifinit() call will set the MII drivers in - * the XIF configuration register accoring to the currently + * the XIF configuration register according to the currently * selected media, there should be no window during which the * data paths of both transceivers are open at the same time, * even if the PHY device drivers use MIIF_NOISOLATE. Modified: head/sys/dev/hme/if_hmereg.h ============================================================================== --- head/sys/dev/hme/if_hmereg.h Fri Apr 22 09:31:40 2011 (r220939) +++ head/sys/dev/hme/if_hmereg.h Fri Apr 22 09:39:05 2011 (r220940) @@ -79,7 +79,7 @@ #define HME_SEB_STAT_TXEACK 0x04000000 /* error during tx DMA */ #define HME_SEB_STAT_TXLERR 0x08000000 /* late error during tx DMA */ #define HME_SEB_STAT_TXPERR 0x10000000 /* parity error during tx DMA */ -#define HME_SEB_STAT_TXTERR 0x20000000 /* tag error durig tx DMA */ +#define HME_SEB_STAT_TXTERR 0x20000000 /* tag error during tx DMA */ #define HME_SEB_STAT_SLVERR 0x40000000 /* pio access error */ #define HME_SEB_STAT_SLVPERR 0x80000000 /* pio access parity error */ #define HME_SEB_STAT_BITS "\177\020" \
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104220939.p3M9d5ON035694>