From owner-freebsd-amd64@FreeBSD.ORG Thu Feb 3 06:16:53 2005 Return-Path: Delivered-To: freebsd-amd64@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id E04CC16A4CE for ; Thu, 3 Feb 2005 06:16:52 +0000 (GMT) Received: from ctb-mesg1.saix.net (ctb-mesg1.saix.net [196.25.240.73]) by mx1.FreeBSD.org (Postfix) with ESMTP id 8BB5843D46 for ; Thu, 3 Feb 2005 06:16:51 +0000 (GMT) (envelope-from mark@aboutit.co.za) Received: from hermes.aboutit.co.za (tbnb-165-201-204.telkomadsl.co.za [165.165.201.204]) by ctb-mesg1.saix.net (Postfix) with ESMTP id 61F78511C for ; Thu, 3 Feb 2005 08:16:48 +0200 (SAST) Received: by hermes.aboutit.co.za (Postfix, from userid 65534) id ABEB6C0C0E; Thu, 3 Feb 2005 08:16:44 +0200 (SAST) Received: from localhost (localhost [127.0.0.1]) by hermes.aboutit.co.za (Postfix) with ESMTP id 9C50EC0C5A for ; Thu, 3 Feb 2005 08:16:42 +0200 (SAST) Received: from mark.aboutit.co.za (unknown [10.10.10.10]) by hermes.aboutit.co.za (Postfix) with ESMTP id 42C0FC0AF1 for ; Thu, 3 Feb 2005 08:16:42 +0200 (SAST) From: Mark Bojara To: freebsd-amd64@freebsd.org In-Reply-To: <41FFD47B.2000505@freebsd.org> References: <20050201190646.GA18651@ack.Berkeley.EDU> <41FFD47B.2000505@freebsd.org> Content-Type: text/plain Organization: AboutIT Online Date: Thu, 03 Feb 2005 08:16:53 +0200 Message-Id: <1107411413.43610.20.camel@mark.aboutit.co.za> Mime-Version: 1.0 X-Mailer: Evolution 2.0.3 FreeBSD GNOME Team Port Content-Transfer-Encoding: 7bit X-Virus-Scanned: by AMaViS snapshot-20020531 X-Spam-Status: No, hits=-5.3 required=8.0 tests=AWL,BAYES_00,EMAIL_ATTRIBUTION,HTML_00_10,IN_REP_TO, QUOTED_EMAIL_TEXT,REFERENCES,REPLY_WITH_QUOTES version=2.55 X-Spam-Level: X-Spam-Checker-Version: SpamAssassin 2.55 (1.174.2.19-2003-05-19-exp) Subject: Re: dump card state: amd64 + 300G seagate + Adaptec AIC7902 + 5.3-stable X-BeenThere: freebsd-amd64@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the AMD64 platform List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 03 Feb 2005 06:16:53 -0000 Hey Scott I have the same problem with a 18 GB Seagate SCSI drive I checked around on seagates website and I cant seem to find firmware updates anywhere. Could you perhaps direct me to a link also I see other replies to this post show that this wont necessarily fix this problem. Thanks Mark On Tue, 2005-02-01 at 12:11 -0700, Scott Long wrote: > Mike Hunter wrote: > > > Hey everybody, > > > > I plopped the new 300 gig drives into the K8S based dual opteron, but I > > got some funny stuff upon rebooting (see the Dump Card State): > > > > ----- Forwarded message from Charlie Root ----- > > > > Copyright (c) 1992-2004 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 5.3-STABLE #0: Sat Dec 11 10:56:35 PST 2004 > > root@:/usr/obj/usr/src/sys/myserver > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: AMD Opteron(tm) Processor 248 (2192.07-MHz K8-class CPU) > > Origin = "AuthenticAMD" Id = 0xf58 Stepping = 8 > > Features=0x78bfbff > > AMD Features=0xe0500800 > > real memory = 8589934592 (8192 MB) > > avail memory = 8248307712 (7866 MB) > > ACPI APIC Table: > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > > cpu0 (BSP): APIC ID: 0 > > cpu1 (AP): APIC ID: 1 > > MADT: Forcing active-low polarity and level trigger for SCI > > ioapic0 irqs 0-23 on motherboard > > ioapic1 irqs 24-27 on motherboard > > ioapic2 irqs 28-31 on motherboard > > acpi0: on motherboard > > acpi0: Power Button (fixed) > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0 > > cpu0: on acpi0 > > cpu1: on acpi0 > > pcib0: port 0xcf8-0xcff on acpi0 > > pci0: on pcib0 > > pcib1: at device 6.0 on pci0 > > pci3: on pcib1 > > ohci0: mem 0xfeafc000-0xfeafcfff irq 19 at device 0.0 on pci3 > > ohci0: [GIANT-LOCKED] > > usb0: OHCI version 1.0, legacy support > > usb0: on ohci0 > > usb0: USB revision 1.0 > > uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 3 ports with 3 removable, self powered > > ohci1: mem 0xfeafd000-0xfeafdfff irq 19 at device 0.1 on pci3 > > ohci1: [GIANT-LOCKED] > > usb1: OHCI version 1.0, legacy support > > usb1: on ohci1 > > usb1: USB revision 1.0 > > uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 3 ports with 3 removable, self powered > > pci3: at device 6.0 (no driver attached) > > fxp0: port 0xbc00-0xbc3f mem 0xfeaa0000-0xfeabffff,0xfeafb000-0xfeafbfff irq 18 at device 8.0 on pci3 > > miibus0: on fxp0 > > inphy0: on miibus0 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > fxp0: Ethernet address: 00:e0:81:2b:4a:e7 > > isab0: at device 7.0 on pci0 > > isa0: on isab0 > > atapci0: port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 > > ata0: channel #0 on atapci0 > > ata1: channel #1 on atapci0 > > pci0: at device 7.2 (no driver attached) > > pci0: at device 7.3 (no driver attached) > > pcib2: at device 10.0 on pci0 > > pci2: on pcib2 > > ahd0: port 0xac00-0xacff,0xa000-0xa0ff mem 0xfc8fc000-0xfc8fdfff irq 24 at device 6.0 on pci2 > > ahd0: [GIANT-LOCKED] > > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs > > ahd1: port 0xa400-0xa4ff,0xa800-0xa8ff mem 0xfc8fe000-0xfc8fffff irq 25 at device 6.1 on pci2 > > ahd1: [GIANT-LOCKED] > > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs > > bge0: mem 0xfc8a0000-0xfc8affff,0xfc8b0000-0xfc8bffff irq 24 at device 9.0 on pci2 > > miibus1: on bge0 > > brgphy0: on miibus1 > > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > > bge0: Ethernet address: 00:e0:81:2b:4b:12 > > bge1: mem 0xfc8d0000-0xfc8dffff,0xfc8e0000-0xfc8effff irq 25 at device 9.1 on pci2 > > miibus2: on bge1 > > brgphy1: on miibus2 > > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto > > bge1: Ethernet address: 00:e0:81:2b:4b:13 > > pci0: at device 10.1 (no driver attached) > > pcib3: at device 11.0 on pci0 > > pci1: on pcib3 > > pci0: at device 11.1 (no driver attached) > > acpi_button0: on acpi0 > > atkbdc0: port 0x64,0x60 irq 1 on acpi0 > > atkbd0: flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > atkbd0: [GIANT-LOCKED] > > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > > sio0: type 16550A, console > > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > > sio1: type 16550A > > fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 > > fdc0: [FAST] > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > orm0: at iomem 0xc0000-0xc7fff on isa0 > > ppc0: cannot reserve I/O port range > > sc0: at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x100> > > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > Timecounters tick every 1.000 msec > > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > > acd0: CDROM at ata0-master UDMA33 > > Waiting 5 seconds for SCSI devices to settle > > (probe2:ahd0:0:2:0): No or incomplete CDB sent to device. > > (probe2:ahd0:0:2:0): Protocol violation in Message-in phase. Attempting to abort. > > (probe2:ahd0:0:2:0): Abort Message Sent > > (probe2:ahd0:0:2:0): SCB 11 - Abort Tag Completed. > > found == 0x1 > > ahd0: Invalid Sequencer interrupt occurred. > > > >>>>>>>>>>>>>>>>>>>Dump Card State Begins <<<<<<<<<<<<<<<<< > > > > ahd0: Dumping Card State at program address 0x23c Mode 0x0 > > Card was paused > > INTSTAT[0x0] SELOID[0x2] SELID[0x40] HS_MAILBOX[0x0] > > INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] > > DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) > > SCSISIGI[0xe6]:(P_MESGIN|REQI|BSYI) SCSIPHASE[0x8]:(MSG_IN_PHASE) > > SCSIBUS[0x80] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) > > SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) > > SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2) SEQ_FLAGS[0x0] > > SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2] KERNEL_QFREEZE_COUNT[0x2] > > MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x22]:(SPIORDY|SELDI) > > SSTAT1[0x11]:(REQINIT|PHASEMIS) SSTAT2[0x0] SSTAT3[0x0] > > PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) > > LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] > > LQOSTAT1[0x0] LQOSTAT2[0x0] > > > > SCB Count = 16 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0xb NEXTSCB 0xff80 > > qinstart = 30 qinfifonext = 30 > > QINFIFO: > > WAITING_TID_QUEUES: > > Pending list: > > 9 FIFO_USE[0x0] SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) > > SCB_SCSIID[0x47] > > Total 1 > > Kernel Free SCB list: 11 12 1 2 3 4 5 6 7 8 10 13 14 15 0 > > Sequencer Complete DMA-inprog list: > > Sequencer Complete list: > > Sequencer DMA-Up and Complete list: > > Sequencer On QFreeze and Complete list: > > > > > > ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xc > > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > > SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] > > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 > > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) > > > > ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xb > > SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) > > SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) > > SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] > > SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 > > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) > > LQIN: 0x8 0x0 0x0 0xc 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > > ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42 > > ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1 > > ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0 > > > > SIMODE0[0xc]:(ENOVERRUN|ENIOERR) > > CCSCBCTL[0x4]:(CCSCBDIR) > > ahd0: REG0 == 0x3f9d, SINDEX = 0x10e, DINDEX = 0x106 > > ahd0: SCBPTR == 0xc, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xffdb > > CDB 12 20 0 81 8 82 > > STACK: 0x237 0x2 0x0 0x0 0x0 0x0 0x0 0x0 > > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 > > Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0 > > da2 at ahd0 bus 0 target 4 lun 0 > > da2: Fixed Direct Access SCSI-3 device > > da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled > > da2: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C) > > da0 at ahd0 bus 0 target 1 lun 0 > > da0: Fixed Direct Access SCSI-3 device > > da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled > > da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > > da1 at ahd0 bus 0 target 2 lun 0 > > da1: Fixed Direct Access SCSI-3 device > > da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled > > da1: 286102MB (585937500 512 byte sectors: 255H 63S/T 36472C) > > SMP: AP CPU #1 Launched! > > Mounting root from ufs:/dev/da0s1a > > > > I saw similar things referenced here: > > > > http://lists.freebsd.org/pipermail/freebsd-scsi/2004-December/001561.html > > http://lists.freebsd.org/pipermail/freebsd-current/2004-April/025016.html > > > > The second email talks about getting rom updates from seagate...but I > > called seagate and they said there's no new firmware out for these drives. > > > > The only other "answers" I'm getting about this is that "well, the 64 bit > > drivers aren't quite up to speed yet." > > > > The drives seem to be working fine...let me know if there's anything I can > > do to help. > > > > (Also, the "probe...abort message sent" stuff seems related to the 30 Gig > > drive...any cluse on that one?) > > > > Thanks, > > > > Mike > > The firmware on two of those drives is dangerouly old and broken. I'd > suggest contacting Seagate for an update, and keep a fire extinguisher > and some holy water nearby until they are upgraded. > > Scott > > _______________________________________________ > freebsd-amd64@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-amd64 > To unsubscribe, send any mail to "freebsd-amd64-unsubscribe@freebsd.org" > -- Mark Bojara - AboutIT Online - +27-12-460-1000