Date: Wed, 18 Sep 2002 11:29:34 -0700 From: "Dinesh Nambisan" <dinesh@nambisan.net> To: <freebsd-questions@freebsd.org> Subject: Problem with xl driver or 3Com mini-pci 3C556B Message-ID: <002e01c25f41$56afccf0$9b0aa8c0@yossarian>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_002B_01C25F06.A9FE6820
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
I'm running FreeBSD 4.6 on an IBM Thinkpad A22p; and I recently
installed the 3Com mini-pci 3C556B card. The xl driver detects the
card, however the link never seems to come up (link status lights
off, "no carrier" in ifconfig). I swapped cables (using known ones
which worked) & made sure that the card was properly inserted several times;
no luck :-(
Netbooting FreeBSD 4.7 pre-release at a friend's place seemed to make
it work, however even upgrading the xl driver sources to 4.7 version
and recompiling the kernel did not work. Anyone have any ideas/suggestions?
I have attached the output of dmesg, pciconf -l and ifconfig for your
perusal... (I'm not subscribed to this list, so would appreciate you copying
your replies via this email-id)
Thanks in advance,
Dinesh
------=_NextPart_000_002B_01C25F06.A9FE6820
Content-Type: text/plain;
name="ifconfig.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="ifconfig.txt"
xl0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500=0A=
options=3D3<rxcsum,txcsum>=0A=
ether 00:04:76:51:33:34=0A=
media: Ethernet autoselect (none)=0A=
status: no carrier=0A=
------=_NextPart_000_002B_01C25F06.A9FE6820
Content-Type: text/plain;
name="pciconf.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="pciconf.txt"
chip0@pci0:0:0: class=3D0x060000 card=3D0x00000000 chip=3D0x71908086 =
rev=3D0x03 hdr=3D0x00=0A=
pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000000 chip=3D0x71918086 =
rev=3D0x03 hdr=3D0x01=0A=
pcic0@pci0:2:0: class=3D0x060700 card=3D0x01301014 chip=3D0xac1b104c =
rev=3D0x03 hdr=3D0x02=0A=
pcic1@pci0:2:1: class=3D0x060700 card=3D0x01301014 chip=3D0xac1b104c =
rev=3D0x03 hdr=3D0x02=0A=
xl0@pci0:3:0: class=3D0x020000 card=3D0x655610b7 chip=3D0x605610b7 =
rev=3D0x20 hdr=3D0x00=0A=
none0@pci0:3:1: class=3D0x078000 card=3D0x615c10b7 chip=3D0x100710b7 =
rev=3D0x20 hdr=3D0x00=0A=
none1@pci0:5:0: class=3D0x040100 card=3D0x01531014 chip=3D0x60031013 =
rev=3D0x01 hdr=3D0x00=0A=
isab0@pci0:7:0: class=3D0x068000 card=3D0x00000000 chip=3D0x71108086 =
rev=3D0x02 hdr=3D0x00=0A=
atapci0@pci0:7:1: class=3D0x010180 card=3D0x00000000 chip=3D0x71118086 =
rev=3D0x01 hdr=3D0x00=0A=
uhci0@pci0:7:2: class=3D0x0c0300 card=3D0x00000000 chip=3D0x71128086 =
rev=3D0x01 hdr=3D0x00=0A=
chip1@pci0:7:3: class=3D0x068000 card=3D0x00000000 chip=3D0x71138086 =
rev=3D0x03 hdr=3D0x00=0A=
none2@pci1:0:0: class=3D0x030000 card=3D0x01551014 chip=3D0x4c461002 =
rev=3D0x02 hdr=3D0x00=0A=
------=_NextPart_000_002B_01C25F06.A9FE6820
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Wed Sep 18 10:26:10 PDT 2002
dinesh@tintin:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (896.68-MHz 686-class CP])
Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 536805376 (524224K bytes)
avail memory =3D 517378048 (505252K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 =
at device 2.0 on pci0
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 =
at device 2.1 on pci0
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
xl0: <3Com 3c556B Fast Etherlink XL> port 0x1800-0x18ff mem =
0xf0101000-0xf010107f,0xf0101400-0xf010147f irq 11 at device 3.0 on pci0
xl0: Ethernet address: 00:04:76:51:33:34
miibus0: <MII bus> on xl0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x10b7, dev=3D0x1007) at 3.1 irq 11
pci0: <unknown card> (vendor=3D0x1013, dev=3D0x6003) at 5.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1c00-0x1c0f at device 7.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq =
11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0
orm0: <Option ROMs> at iomem =
0xc0000-0xcffff,0xd0000-0xd07ff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: >Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console>"at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
ad0:$30520MB <IBM-DJSA-232> [66144/15/63] at ata0-master UDMA33
acd0: CD-RW <SONY CD-RW CRX700E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
\M-<118>.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Wed Sep 18 10:26:10 PDT 2002
dinesh@tintin:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (697.42-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10
=
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 536805376 (524224K bytes)
avail memory =3D 517378048 (505252K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on =
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 =
at device 2.0 on pci0
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 =
at device 2.1 on pci0
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr =
save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
xl0: <3Com 3c556B Fast Etherlink XL> port 0x1800-0x18ff mem =
0xf0101000-0xf010107f,0xf0101400-0xf010147f irq 11 at device 3.0 on pci0
xl0: Ethernet address: 00:04:76:51:33:34
miibus0: <MII bus> on xl0
acphy0: <AC101 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x10b7, dev=3D0x1007) at 3.1 irq 11
pci0: <unknown card> (vendor=3D0x1013, dev=3D0x6003) at 5.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1c00-0x1c0f at device 7.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq =
11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at =
device 7.3 on pci0
orm0: <Option ROMs> at iomem =
0xc0000-0xcffff,0xd0000-0xd07ff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
ad0: 30520MB <IBM-DJSA-232> [66144/15/63] at ata0-master UDMA33
acd0: CD-RW <SONY CD-RW CRX700E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
------=_NextPart_000_002B_01C25F06.A9FE6820--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002e01c25f41$56afccf0$9b0aa8c0>