From owner-freebsd-mobile Tue Jun 5 9:48:21 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from tiku.hut.fi (tiku.hut.fi [130.233.228.86]) by hub.freebsd.org (Postfix) with ESMTP id 380BD37B403 for ; Tue, 5 Jun 2001 09:48:05 -0700 (PDT) (envelope-from sparvu@alpha.hut.fi) Received: from alpha.hut.fi (sparvu@alpha.hut.fi [130.233.224.50]) by tiku.hut.fi (8.9.3/8.9.3) with ESMTP id TAA26206; Tue, 5 Jun 2001 19:48:04 +0300 (EET DST) Date: Tue, 5 Jun 2001 19:48:03 +0300 (EET DST) From: Stefan Parvu To: freebsd-mobile@freebsd.org Cc: erich@ucsd.edu, freebsd_mail@yahoo.com Subject: dmesg from Tecra 8100 irq problem Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.org Hi this is the dmesg from my laptop. I this sio0 is irq3 so here is the problem. What I have to do is: to configure the sio0 in the kernel file using a different irq or the pccard ? right ? How can I do this ? This is my dmesg file: Rebooting... Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #2: Mon Jun 5 14:38:04 EEST 2000 root@nagua.cslab.finland.sun.com:/usr/src/sys/compile/TOSHIBA Calibrating clock(s) ... TSC clock: 498139332 Hz, i8254 clock: 1193148 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III/Pentium III Xeon/Celeron (498.16-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff real memory = 268304384 (262016K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0034b000 - 0x0ffd7fff, 264818688 bytes (64653 pages) avail memory = 258064384 (252016K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f17b0 bios32: Entry = 0xfc376 (c00fc376) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xee03 pnpbios: Found PnP BIOS data at 0xc00f8400 pnpbios: Entry = f0000:927f Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 6934f351 Other BIOS signatures found: ACPI: 000f4fd0 Preloaded elf kernel "kernel" at 0xc0325000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 28 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fff0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000ff80, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000fe70, size 4 found-> vendor=0x11c1, dev=0x0441, revid=0x01 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ffefff00, size 8 map[14]: type 3, range 32, base 000002f8, size 3 map[18]: type 1, range 32, base 00001c00, size 8 found-> vendor=0x1179, dev=0x0d01, revid=0x00 class=0d-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000ff60, size 5 found-> vendor=0x1179, dev=0x0617, revid=0x20 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=14 secondarybus=14 intpin=a, irq=255 found-> vendor=0x1179, dev=0x0617, revid=0x20 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=15 secondarybus=15 intpin=b, irq=255 found-> vendor=0x1073, dev=0x0010, revid=0x02 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base efff8000, size 15 map[14]: type 1, range 32, base 0000ff00, size 6 map[18]: type 3, range 32, base 0000fefc, size 2 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8c10, revid=0x11 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base f0000000, size 27 pci1: on pcib1 pci1: (vendor=0x5333, dev=0x8c10) at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff at device 5.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfff0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfff8 ata1: mask=03 status0=50 status1=01 ata1: mask=03 ostat0=50 ostat2=01 ata1-master: ATAPI probe a=14 b=eb ata1-slave: ATAPI probe a=00 b=00 ata1: mask=03 status0=00 status1=01 ata1-slave: ATA probe a=04 b=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: port 0xfe70-0xfe7f at device 5.3 on pci0 pci0: (vendor=0x11c1, dev=0x0441) at 7.0 irq 3 pci0: (vendor=0x1179, dev=0x0d01) at 9.0 irq 11 chip2: at device 11.0 on pci0 chip3: at device 11.1 on pci0 pci0: (vendor=0x1073, dev=0x0010) at 12.0 irq 11 eisa0: on motherboard eisa0: unknown card @@@0000 (0x00000000) at slot 1 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 30 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode stat is fe stat is f2 pccard0: on pcic0 pccard1: on pcic0 pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x51 0x51 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300-0x31f on isa0 sn0 failed to probe at port 0x300-0x30f irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached ata0-master: success setting UDMA2 on Intel chip Creating DISK ad0 Creating DISK wd0 ad0: ATA-4 disk at ata0-master ad0: 11513MB (23579136 sectors), 23392 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 11513MB [23392/16/63] at ata0-master UDMA33 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 ad0s1: type 0xb, start 63, end = 4192964, size 4192902 : OK ad0s2: type 0xa5, start 4192965, end = 23567354, size 19374390 : OK start_init: trying /sbin/init pcic: I/O win 0 flags 17 240-24f pcic: I/O win 0 flags 7 240-24f ep0: <3Com Etherlink III 3C589> at port 0x240-0x24f irq 3 slot 0 on pccard0 pcic: I/O win 0 flags 17 240-24f ep0: Ethernet address 00:60:97:8a:c4:5c bpf: ep0 attached splash: image decoder found: daemon_saver Linux-ELF exec handler installed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message