Date: Fri, 16 Mar 2001 16:46:09 -0600 From: "Alejandro A. Ramirez" <ales@megared.net.mx> To: <wpaul@osd.bsdi.com> Cc: <freebsd-stable@freebsd.org> Subject: pcn driver failing at boot !!! Message-ID: <019501c0ae6a$f75e6960$d3620a0a@megared.net.mx>
next in thread | raw e-mail | index | archive | help
Hi Bill,
I have noticed a problem with the pcn driver, I have an IBM Netfinity
5000 Server, with an AMD PCnet Fast + (AM79C972BKC) Integrated Card, and I
have noticed that this card doesnt get initialized properly, it seems that
the driver doesnt detect the conexion to the switch, because I cant use the
network unless I unplugged the ethernet cord, and plug it back again, then I
can use the network, this server was working perfectly with FBSD4.1, with
the lnc driver, but in half-duplex mode :o( I think that there is something
not proobing correctly at boot time, that makes this error to happen every
time that the system boots, this is very bad, because every time that I have
to reboot the server, I have to be close to unplug & plug the cable again.
Here its a verbose boot with the GENERIC kernel, I hope this can help
you out to find the problem, If you think that you need more info on this,
testing, or if you need access to the system, just let me know.
Thanks for your Help !!!
Ales
cache# uname -a
FreeBSD a.b.c.d 4.2-RELEASE FreeBSD 4.2-RELEASE #1: Mon Feb 12 13:06:12 CST
2001 root@a.b.c.d:/usr/src/sys/compile/kernel i386
boot -v
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 598279226 Hz, i8254 clock: 1192939 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (598.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE
>
real memory = 1073725440 (1048560K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009cfff, 638976 bytes (156 pages)
0x0044f000 - 0x3fff3fff, 1069174784 bytes (261029 pages)
avail memory = 1041539072 (1017128K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fd5d0
bios32: Entry = 0xfd5e1 (c00fd5e1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xd61c
pnpbios: Found PnP BIOS data at 0xc00fde90
pnpbios: Entry = f0000:499d Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdec0
Preloaded elf kernel "kernel.GENERIC" at 0xc0436000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000070
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0007, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 0
found-> vendor=0x1166, dev=0x0005, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x9004, dev=0x7895, revid=0x04
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base febff000, size 12
found-> vendor=0x9004, dev=0x7895, revid=0x04
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00002200, size 8
map[14]: type 1, range 32, base febfe000, size 12
found-> vendor=0x1022, dev=0x2000, revid=0x36
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00002180, size 5
map[14]: type 1, range 32, base febfdc00, size 5
found-> vendor=0x5333, dev=0x8901, revid=0x16
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base f8000000, size 26
found-> vendor=0x1166, dev=0x0200, revid=0x4d
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0210, revid=0x4a
class=01-01-ea, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 000001f0, size 3
map[14]: type 1, range 32, base 000003f4, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x1166, dev=0x0220, revid=0x04
class=0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=7
map[10]: type 1, range 32, base ff700000, size 12
pci0: <PCI bus> on pcib0
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x2000-0x20ff mem
0xfebff000-0xfebfffff irq 9 at device 6
.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Low byte termination Enabled
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 394 instructions downloaded
aic7895C: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0x2200-0x22ff mem
0xfebfe000-0xfebfefff irq 10 at device
6.1 on pci0
ahc1: Reading SEEPROM...done.
ahc1: Low byte termination Enabled
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 394 instructions downloaded
aic7895C: Wide Channel B, SCSI Id=7, 32/255 SCBs
pcn0: <AMD PCnet/PCI 10/100BaseTX> port 0x2180-0x219f mem
0xfebfdc00-0xfebfdc1f irq 11 at device 9.0 on p
ci0
pcn0: Ethernet address: 00:06:29:50:c1:59
miibus0: <MII bus> on pcn0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x080017, model 0x0001, rev. 0
ukphy0: no media present
bpf: pcn0 attached
pci0: <S3 Trio 64V2/DX/GX graphics accelerator> (vendor=0x5333, dev=0x8901)
at 10.0 irq 5
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 irq 14 at de
vice 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=00 status1=00
ata0: devices=04
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
ohci0: <OHCI (generic) USB controller> mem 0xff700000-0xff700fff irq 7 at
device 15.2 on pci0
ohci0: (New OHCI DeviceId=0x02201166)
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (unknown) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00071166)
pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
found-> vendor=0x1014, dev=0x0022, revid=0x07
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
pci1: <PCI bus> on pcib1
pcib2: <IBM 82351 PCI-PCI bridge> at device 5.0 on pci1
found-> vendor=0x0e11, dev=0xae10, revid=0x04
class=01-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[10]: type 1, range 32, base 00005100, size 8
map[14]: type 1, range 32, base c0800000, size 8
pci2: <PCI bus> on pcib2
ida0: <Compaq Smart Array 3200 controller> port 0x5100-0x51ff mem
0xc0800000-0xc08000ff irq 15 at device
0.0 on pci2
ida0: drives=1 firm_rev=4.16
idad0: <Compaq Logical Drive> on ida0
idad0: 69427MB (142188000 sectors), blocksize=512
Creating DISK idad0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000
ata3: mask=00 status0=ff status1=ff
ata3: probe allocation failed
ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe at port 0x330 on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300 on isa0
sn0 failed to probe at port 0x300 irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c0c0, tty 630012, net 670812
bpf: sl0 attached
ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting PIO4 on generic chip
(null): MODE_SENSE_BIG command timeout - resetting
ata0: resetting devices .. ata0: mask=01 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=14 b=eb
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=01 status0=00 status1=00
ata0: devices=04
done
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
(null): read data overrun 2/0
acd0: <CRD-8400B/1.12> CDROM drive at ata0 as master
acd0: read 500KB/s (10517KB/s), 1792KB buffer, PIO4
acd0: Reads: CD-RW
acd0: Mechanism: caddy
acd0: Medium: CD-ROM 120mm audio disc loaded
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe14:ahc0:0:15:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe14:ahc0:0:15:0): ILLEGAL REQUEST asc:24,0
(probe14:ahc0:0:15:0): Invalid field in CDB
(ahc0:A:13:0): Sending WDTR 1
(ahc0:A:13:0): Received WDTR 1 filtered to 1
ahc0: target 13 using 16bit transfers
(ahc0:A:13:0): Sending SDTR period 2b, offset 8
(ahc0:A:13:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 13 synchronous at 5.7MHz, offset = 0x8
(ahc0:A:12:0): Sending WDTR 1
(ahc0:A:12:0): Received WDTR 1 filtered to 1
ahc0: target 12 using 16bit transfers
(ahc0:A:12:0): Sending SDTR period 2b, offset 8
(ahc0:A:12:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 12 synchronous at 5.7MHz, offset = 0x8
(ahc0:A:11:0): Sending WDTR 1
(ahc0:A:11:0): Received WDTR 1 filtered to 1
ahc0: target 11 using 16bit transfers
(ahc0:A:11:0): Sending SDTR period 2b, offset 8
(ahc0:A:11:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 11 synchronous at 5.7MHz, offset = 0x8
(ahc0:A:10:0): Sending WDTR 1
(ahc0:A:10:0): Received WDTR 1 filtered to 1
ahc0: target 10 using 16bit transfers
(ahc0:A:10:0): Sending SDTR period 2b, offset 8
(ahc0:A:10:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 10 synchronous at 5.7MHz, offset = 0x8
(ahc0:A:9:0): Sending WDTR 1
(ahc0:A:9:0): Received WDTR 1 filtered to 1
ahc0: target 9 using 16bit transfers
(ahc0:A:9:0): Sending SDTR period 2b, offset 8
(ahc0:A:9:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 9 synchronous at 5.7MHz, offset = 0x8
(ahc0:A:8:0): Sending WDTR 1
(ahc0:A:8:0): Received WDTR 1 filtered to 1
ahc0: target 8 using 16bit transfers
(ahc0:A:8:0): Sending SDTR period 2b, offset 8
(ahc0:A:8:0): Received SDTR period 2b, offset 8
Filtered to period 2b, offset 8
ahc0: target 8 synchronous at 5.7MHz, offset = 0x8
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
Creating DISK da4
Creating DISK da5
pass0 at ahc0 bus 0 target 8 lun 0
pass0: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass0: Serial Number LR64141800007019L46P
pass0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass1 at ahc0 bus 0 target 9 lun 0
pass1: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass1: Serial Number LR737043000010161WC2
pass1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass2 at ahc0 bus 0 target 10 lun 0
pass2: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass2: Serial Number LR735673000010200VZL
pass2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass3 at ahc0 bus 0 target 11 lun 0
pass3: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass3: Serial Number LR73091000001005HSW1
pass3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass4 at ahc0 bus 0 target 12 lun 0
pass4: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass4: Serial Number LR64130900007019L3AC
pass4: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass5 at ahc0 bus 0 target 13 lun 0
pass5: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
pass5: Serial Number LR735032000010200MLT
pass5: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
pass6 at ahc0 bus 0 target 15 lun 0
pass6: <EuroLogc ESM 0205> Removable Processor SCSI-3 device
pass6: 3.300MB/s transfers
pass6 at ahc0 bus 0 target 15 lun 0
pass6: <EuroLogc ESM 0205> Removable Processor SCSI-3 device
pass6: 3.300MB/s transfers
da0 at ahc0 bus 0 target 8 lun 0
da0: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da0: Serial Number LR64141800007019L46P
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da1 at ahc0 bus 0 target 9 lun 0
da1: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da1: Serial Number LR737043000010161WC2
da1: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da2 at ahc0 bus 0 target 10 lun 0
da2: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da2: Serial Number LR735673000010200VZL
da2: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da2: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da3 at ahc0 bus 0 target 11 lun 0
da3: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da3: Serial Number LR73091000001005HSW1
da3: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da3: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da4 at ahc0 bus 0 target 12 lun 0
da4: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da4: Serial Number LR64130900007019L3AC
da4: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da4: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
da5 at ahc0 bus 0 target 13 lun 0
da5: <SEAGATE ST318203LC 0002> Fixed Direct Access SCSI-2 device
da5: Serial Number LR735032000010200MLT
da5: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing
Enabled
da5: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C)
no devsw (majdev=0 bootdev=0xa0200000)
Mounting root from ufs:/dev/idad0s1a
idad0s1: type 0xa5, start 0, end = 142187999, size 142188000 : OK
start_init: trying /sbin/init
da3s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da4s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da2s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da1s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da0s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da5s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da0s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da1s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da2s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da3s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da4s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
da5s1: type 0xa5, start 0, end = 35566479, size 35566480 : OK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?019501c0ae6a$f75e6960$d3620a0a>