Date: Fri, 20 Mar 2009 06:43:33 -0500 From: Derek Ragona <derek@computinginnovations.com> To: Mattia Rossi <mrossi@swin.edu.au>, freebsd-current@freebsd.org Subject: Re: USB2, mouse and X Message-ID: <6.0.0.22.2.20090320064223.025ae3d0@mail.computinginnovations.com> In-Reply-To: <49C083A4.5020608@swin.edu.au> References: <49C083A4.5020608@swin.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
At 12:16 AM 3/18/2009, Mattia Rossi wrote:
>Hi,
>
>I've seen that there are a lot of issues with mice and the new USB2 stack,
>but as my problem is still not resolved with the current kernel, i think
>it's time to report my problem:
>
>My mouse (or maybe keyboard?) issues regard only the X window system (I
>tried fluxbox and KDE4). Mouse and keyboard are USB, attached via a USB
>hub (integrated in my monitor). They both work without flaws in the
>console, but it's a pain to write text in different windows in X. The
>typed text just doesn't get displayed some times, unless the mouse cursor
>is moved. Sometimes after typing some text, and moving the mouse
>afterwards, the text gets written, but letters will be grouped together
>and look like this:
>
>this iss whahatppen
>
>(this is what happens)
>
>I guess it's related to the moused problems (it's a HP branded Logitech
>mouse), so here are the dumps for the mouse and keyboard, dmesg output and
>uname output:
>
>FreeBSD 8.0-CURRENT #11 r189933M: Wed Mar 18 10:34:42 EST 2009 i386
>
>usbus0: 12Mbps Full Speed USB
>v1.0
>
>
>usbus1: 12Mbps Full Speed USB
>v1.0
>
>
>usbus2: 480Mbps High Speed USB
>v2.0
>
>
>usbus3: 12Mbps Full Speed USB
>v1.0
>
>
>usbus4: 12Mbps Full Speed USB
>v1.0
>
>
>usbus5: 12Mbps Full Speed USB
>v1.0
>
>
>usbus6: 480Mbps High Speed USB
>v2.0
>
>
>ad0: 152627MB <WDC WD1600AAJS-60B4A0 02.03A02> at ata0-master
>SATA300
>
>
>ugen0.1: <Intel> at
>usbus0
>
>
>uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>usbus0
>
>
>ugen1.1: <Intel> at
>usbus1
>
>
>uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>usbus1
>
>
>ugen2.1: <Intel> at
>usbus2
>
>
>uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
>usbus2
>
>
>ugen3.1: <Intel> at
>usbus3
>
>
>uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>usbus3
>
>
>ugen4.1: <Intel> at
>usbus4
>
>
>uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
>usbus4
>
>
>ugen5.1: <Intel> at usbus5
>uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
>ugen6.1: <Intel> at usbus6
>uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
>
>uhub0: 2 ports with 2 removable, self powered
>uhub1: 2 ports with 2 removable, self powered
>uhub3: 2 ports with 2 removable, self powered
>uhub4: 2 ports with 2 removable, self powered
>uhub5: 2 ports with 2 removable, self powered
>uhub2: 4 ports with 4 removable, self powered
>uhub6: 6 ports with 6 removable, self powered
>
>ugen6.2: <Standard Microsystems> at usbus6
>uhub7: <Standard Microsystems product 0x2514, class 9/0, rev 2.00/0.00,
>addr 2> on usbus6
>uhub7: 2 ports with 1 removable, self powered
>ugen6.3: <CHICONY> at usbus6
>ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 3>
>on usbus6
>kbd2 at ukbd0
>ugen6.4: <Logitech> at usbus6
>ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 4> on
>usbus6
>ums0: 3 buttons and [XYZ] coordinates
>
>Keyboard:
>
>usbconfig -u 6 -a 3 do_request 0x81 0x06 0x2200 1 0x100
>REQUEST = <0x06 0x0c 0x00 0x09 0x01 0xa1 0x01 0x85 0x01 0x25 0x01 0x15
>0x00 0x75 0x01 0x0a 0x8a 0x01 0x0a 0x11 0x00 0x0a 0x12 0x00 0x0a 0x23 0x02
>0x0a 0x21 0x02 0x0a 0x13 0x00 0x0a 0x14 0x00 0x0a 0x15 0x00 0x95 0x08 0x81
>0x06 0x81 0x01 0x81 0x01 0x81 0x01 0x81 0x01 0xc0 0x06 0x00 0xff 0x09 0x01
>0xa1 0x01 0x85 0x02 0x25 0x01 0x15 0x00 0x75 0x01 0x0a 0x8a 0x01 0x0a 0x25
>0x02 0x0a 0x24 0x02 0x0a 0x23 0x02 0x0a 0x21 0x02 0x0a 0x2a 0x02 0x0a0x27
>0x02 0x0a 0x26 0x02 0x95 0x08 0x81 0x06 0x81 0x01 0x81 0x01 0x81 0x01 0x81
>0x01 0x15 0x00 0x27 0xff 0xff 0xff 0x7f 0x09 0x30 0x75 0x20 0x95 0x01 0xb1
>0x02 0xc0><%u#!%u%$#!*'&'0u >
>
>usbconfig -u 6 -a 3 do_request 0x81 0x06 0x2200 0 0x100
>REQUEST = <ERROR>
>
>Mouse:
>
>usbconfig -u 6 -a 4 do_request 0x81 0x06 0x2200 1 0x100
>REQUEST = <0x05 0x01 0x09 0x02 0xa1 0x01 0x09 0x01 0xa1 0x00 0x05 0x09
>0x19 0x01 0x29 0x03 0x15 0x00 0x25 0x01 0x75 0x01 0x95 0x03 0x81 0x02 0x75
>0x05 0x95 0x01 0x81 0x01 0x05 0x01 0x09 0x30 0x09 0x31 0x09 0x38 0x15 0x81
>0x25 0x7f 0x75 0x08 0x95 0x03 0x81 0x06 0xc0 0xc0><)%uu018%u>
>
>usbconfig -u 6 -a 4 do_request 0x81 0x06 0x2200 0 0x100
>REQUEST = <ERROR>
>
>And that's the dmesg output for the mouse if it's attached to one of the
>front ports of the PC:
>
>ums0: at uhub7, port 2, addr 4 (disconnected)
>ugen6.4: <Logitech> at usbus6 (disconnected)
>ugen1.2: <Logitech> at usbus1
>ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on
>usbus1
>ums0: 3 buttons and [XYZ] coordinates
>
>And the dumps (which don't change - just to eliminate the USB hub as
>problem source):
>
>usbconfig -u 1 -a 2 do_request 0x81 0x06 0x2200 1 0x100
>REQUEST = <0x05 0x01 0x09 0x02 0xa1 0x01 0x09 0x01 0xa1 0x00 0x05 0x09
>0x19 0x01 0x29 0x03 0x15 0x00 0x25 0x01 0x75 0x01 0x95 0x03 0x81 0x02 0x75
>0x05 0x95 0x01 0x81 0x01 0x05 0x01 0x09 0x30 0x09 0x31 0x09 0x38 0x15 0x81
>0x25 0x7f 0x75 0x08 0x95 0x03 0x81 0x06 0xc0 0xc0><)%uu018%u>
>
>usbconfig -u 1 -a 2 do_request 0x81 0x06 0x2200 0 0x100
>REQUEST = <0x05 0x01 0x09 0x02 0xa1 0x01 0x09 0x01 0xa1 0x00 0x05 0x09
>0x19 0x01 0x29 0x03 0x15 0x00 0x25 0x01 0x75 0x01 0x95 0x03 0x81 0x02 0x75
>0x05 0x95 0x01 0x81 0x01 0x05 0x01 0x09 0x30 0x09 0x31 0x09 0x38 0x15 0x81
>0x25 0x7f 0x75 0x08 0x95 0x03 0x81 0x06 0xc0 0xc0><)%uu018%u>
>
>Additional observation:
>After unplugging the mouse from the hub and plugging it into the front USB
>connector, I need to switch to a console from X to have the moused (I
>suppose) kick in, in order to be able to use the mouse again. When I
>switch back to X it works, otherwise it won't. (Probably because it wants
>me to move the mouse before it continues operating.. or some crap like that..)
>
>X is xorg-7.4 with server xorg-server-1.5.3_7
>
>KDE4 is the latest 4.2.1 from today. Completely rebuilt.
>
>moused is actually disabled/missing from rc.conf and the X server is
>started with "AllowEmptyInput" "off"
>as described by the last UPDATING information in /usr/ports and/or /usr/src.
>
>Would be nice if this issue (which persists since the introduction of
>USB2) could be solved.
>
>Thanks
>
>Mat
I have the same behavior under FreeBSD 7.1 release.
-Derek
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20090320064223.025ae3d0>