Date: Mon, 23 Jan 2017 00:24:17 -0600 From: Dustin Marquess <dmarquess@gmail.com> To: Oleksandr Tymoshenko <gonzo@bluezbox.com> Cc: Hans Petter Selasky <hps@selasky.org>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: Getting the kernel to let go of my UART! Message-ID: <CAJpsHY4Q%2BnpLa7QsN7%2BWOPP9EF65EEakGgxUnW3cmOJ4p0iQMQ@mail.gmail.com> In-Reply-To: <20170122190659.GA62786@bluezbox.com> References: <CAJpsHY4LEdtnTVVz3nrpQcLFePwNnVQ_RdZ3k-2VMaf=HAJ-9A@mail.gmail.com> <48f8cbc1-3814-b9f6-0e3a-ebe97466d1df@selasky.org> <CAJpsHY6Wsoi14YMR3nM_OwfZphqF7rA5-E=SGfB0sM5EXfP9KA@mail.gmail.com> <20170122190659.GA62786@bluezbox.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jan 22, 2017 at 1:06 PM, Oleksandr Tymoshenko <gonzo@bluezbox.com> wrote: > Dustin Marquess (dmarquess@gmail.com) wrote: >> On Sunday, January 22, 2017, Hans Petter Selasky <hps@selasky.org> wrote: >> >> > On 01/22/17 06:07, Dustin Marquess wrote: >> > >> >> [Sorry if this is somewhat of a dupe, I have yet to find a solution] >> >> >> >> I've been running FreeBSD on my Pi 3s for a little over a month now, >> >> first using gonzo's SMP code + a home cross-compiled kernel, and then >> >> I moved to the HardenedBSD images. All of them work great except one >> >> issue that's driving me nuts... >> >> >> >> The downside to the Pi 3 vs some other boards is that there's really >> >> only one UART tied to the GPIO pins. I'm trying to feed my Pi 3 with >> >> a GPS board. >> >> >> >> 1st issue: The NMEA stream upsets U-boot. Fine, compiled my own and >> >> that's "fixed". >> >> >> >> 2nd issue: Even with a USB keyboard attached and HDMI output >> >> connected, FreeBSD still wants to steal the first uart (ttyu0) as a >> >> console port. I thought that would be fine as long as I use "-m -n >> >> -q" in the boot config to disable kernel output and then "conscontrol >> >> delete ttyu0". Well, that KIND of works. It seems to work fine when >> >> using 115200bps, but trying to change the baud rate to match the GPS >> >> unit doesn't seem to work at all, I'm guessing because it's still set >> >> as an available console? >> >> >> >> hint.uart.0.flags="0x0" doesn't work, as it still marks it as a >> >> console. console="efi" seems to be the only setting that works, >> >> "vidconsole" and "nullconsole" both don't work. >> >> >> >> Is there a way to stop the kernel from trying to claim the UART as a >> >> console? >> >> >> > >> > I think so, have a look in /etc/ttys and comment out the ttyu0 line. >> > >> > Sadly, I already did that. There's no getty running, but dmesg still shows >> the kernel marking it as a console. > > Just a random idea, try adding hw.fdt.console=foo0 to /boot/loader.conf > This should force uart_cpu_fdt_probe to fail. Wow, I think that actually did the trick! Thank you so very much, I've been pulling my hair out of this for probably 2 weeks now! -Dustin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJpsHY4Q%2BnpLa7QsN7%2BWOPP9EF65EEakGgxUnW3cmOJ4p0iQMQ>