Date: Sat, 18 Dec 1999 20:42:39 +0100 (CET) From: Soren Schmidt <sos@freebsd.dk> To: mb@imp.ch (Martin Blapp) Cc: sos@freebsd.org, freebsd-current@freebsd.org Subject: Re: ATA driver problem?? (lost disk contact) Message-ID: <199912181942.UAA27487@freebsd.dk> In-Reply-To: <Pine.SGI.4.10.9912181654150.17589-100000@mephisto.imp.ch> from Martin Blapp at "Dec 18, 1999 05:54:31 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
It seems Martin Blapp wrote: > I've bought two new 16GB ATA disks and am not able to boot > anymore since wd0 has been retired: > > Fresh current from today: > > [...] > ad0: ad_timeout: lost disk contact > ata0: resetting devices > > and after it hangs forever. > > I tried IDE_DELAY=10000 and 15000 but it did not change anything. Hmm, IDE_DELAY is an option for the old wd driver, so thats expected :) > Break into DDB is not possible. This happens with/without > ATA DMA support in the kernel. > > fuchur# pciconf -l > chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x70061022 rev=0x23 hdr=0x00 > pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x70071022 rev=0x01 hdr=0x01 > isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x74081022 rev=0x01 hdr=0x00 > ide_pci0@pci0:7:1: class=0x01018a card=0x00000000 chip=0x74091022 rev=0x03 hdr=0x00 > chip1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x740b1022 rev=0x03 hdr=0x00 > none0@pci0:7:4: class=0x0c0310 card=0x00000000 chip=0x740c1022 rev=0x06 hdr=0x00 > de0@pci0:10:0: class=0x020000 card=0x00000000 chip=0x00091011 rev=0x20 hdr=0x00 > none1@pci0:11:0: class=0x010000 card=0x10001000 chip=0x000f1000 rev=0x26 hdr=0x00 > vga-pci0@pci1:5:0: class=0x030000 card=0x2179102b chip=0x0525102b rev=0x04 hdr=0x00 This is an AMD K7 board rigth?, we have no support for AMD's own southbridge... > and the output from the old wd driver: > wdc0: unit 0 (wd0): <IBM-DJNA-351520> > wd0: 14664MB (30033360 sectors), 29795 cyls, 16 heads, 63 S/T, 512 B/S So it didn't use multisector nor DMA, what does the ata driver say in the probe ?? > PS: I can give you access to the machine if you like. Well, if the ata driver just hangs the system, there is not much I can do remotely, mayhaps on a serial console, if I can reset it somehow... -Søren To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912181942.UAA27487>