Date: Wed, 21 Oct 2009 19:57:40 -0400 From: Barry Friedman <bf.mbox@gmail.com> To: ulf@alameda.net Cc: freebsd-proliant@freebsd.org Subject: Re: Need help recovering from 6404 Raid controller failure Message-ID: <3a9afd990910211657p2504cd5cvb724a5ed21a83326@mail.gmail.com> In-Reply-To: <20091021233839.GA2939@evil.alameda.net> References: <20091021132217.GA49634@emax.ca> <20091021233839.GA2939@evil.alameda.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 21, 2009 at 7:38 PM, Ulf Zimmermann <ulf@alameda.net> wrote:
> You can just let it sit in the BIOS of the SmartArray controller it will
How do you do this?
> rebuild there too. Or you can download the SmartStart CD and boot it.
> Run the Raid management tool from there to see progress.
Thanks Ulf. The machine is stable again after reseating all the
cards for the third time.
Will the 6404 rebuild while the machine is running or is it necessary
to run SmartStart?
dmesg shows:
ciss1: *** Physical drive failure: SCSI port 1 ID 4
ciss1: *** State change, logical drive 1
ciss1: logical drive 1 (da1) changed status recovering->OK, spare status
0x15<configured,failed,available>
Any idea how to translate this?
Regards,
--
Barry Friedman
Emax Computer Systems Inc.,
480 Tweedsmuir Ave.,
Ottawa, Ont. Canada K1Z 5N9
Phone: (613) 725-3198 Fax: 725-0298
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3a9afd990910211657p2504cd5cvb724a5ed21a83326>